Airsoft Boneyard

This gas powered FABARM shotgun has a jammed pump. We're unsure on the root cause or any potential fixes to this issue, but you unfortunately won't be able to rack it. A unique platform, this one will be well worth your time to fix up, or could serve well as a display piece/prop.

This gas powered FABARM shotgun has a jammed pump. We're unsure on the root cause or any potential fixes to this issue, but you unfortunately won't be able to rack it. A unique platform, this one will be well worth your time to fix up, or could serve well as a display piece/prop.

This gas powered FABARM shotgun is in the Boneyard with several problems. It has supposedly been used for parts, though we're unsure what exactly is now missing. Its pump tends to jam when racked and the trigger does nothing. The shell tube towards the front of the platform is also broken - the threaded section for the cap is no longer secured into the tube. There may be more ongoing problems but we cannot diagnose these due to the platform not being in a functional enough condition to test. Overall this might be quite a big task to fix up, so may be better used to take more parts from, or just to serve as a pretty cool wall hanger!

This gas-powered FABARM shotgun has a jammed pump; the potential cause of which could be a snapped cocking arm sear. We're unsure on any other issues or potential fixes for the identified fault, but you unfortunately won't be able to rack it. It also shows slight external wear, most noticeably on the tip of the outer barrel. A unique platform for sure, this one will be well worth your time to fix up, or could serve well as a display piece/prop.

This GLOCK replica has excessive wear on its outer barrel. There was also a broken-off piece found in the box alongside the pistol, which upon further inspection appears to have also come from the outer barrel where the front of the hop unit sits. The front spring guide block is also missing, meaning there may be mechanism issues when firing this replica which is also somewhat indicated by the rather unsatisfying racking of the slide. This could be an easy fix-up if both of the problematic parts are replaced (spring guide block and outer barrel).

This replica has landed in our Boneyard missing a whole bunch of parts. There's so many parts missing that it's easier to state what's left; the body of the replica, outer barrel, gearbox shell, hop unit, and charging handle assembly (including the guide and baseplate for the spring and cocking handle). On the side of the platform, the original selector and spring guide for the gearbox is also present.

Due to how much would need to be done in order to get it working again (it's missing basically everything inside the gearbox), this replica may ultimately serve best as a parts donor for what's remaining. Externally, what's left of the platform is surprisingly in mint condition. Not that it particularly matters in this state, but it must be noted that this replica's magazine is also missing, so a replacement or two will need sourcing if you do intend to somehow get this thing shooting again.

This Saiga-12K AEG is in the Boneyard due to having a broken stock latch. The stock can be fixed or folded, but the action between these will require a rather difficult press into what's remaining of the button toward the back of the platform. Aside from this, the gun is in pristine external condition. It unfortunately was however also shooting up to 400FPS in testing (way hotter then it should), so will need downgrading before skirmish use.

This replica has landed in our boneyard due to a trigger issue - it seems that the trigger itself has been disconnected from the gearbox, so the replica doesn't cycle. We're not entirely sure if this is a direct cause of the trigger, though it seems that the spring that allows the trigger to reset is missing as it is quite stiff and doesn't bounce back after pulled.

This is an absolutely awesome platform in need of a likely quick fix for any experienced tech...

This replica has landed in our boneyard due to issues with its selector - whilst the replica is in safe, it'll fire semi-auto, but when switched to either semi or full-auto, it'll only fire in full. This will need to be fixed in order to have a safe mode. Firing this replica through the chronograph gave us results around the 250 FPS mark using 0.20g BBs, so this AEG may need to be inspected for airseal issues as it's supposed to fire closer to 315.

This Cowboy Rifle is missing parts relating to its gas mechanism. It seems the hammer also has an issue where it will fire at random shortly after the replica is cocked. We've also encountered some irregular extraction failures of the shells where they'll get stuck either in the chamber when they're attempted to be ejected or where they're transferred from the feed tube into the chamber.

One major benefit for this replica is that it's two-tone red, meaning you won't need UKARA or other defence if you're wanting to purchase it as a display piece or even just a cool lever-action to play around with!

This replica's nozzle is nowhere to be seen, meaning it will not work without the installation of a suitable replacement. The safety bar that locks the safety in place is also missing, meaning there's no positive click when changing fire mode, and the safety can easily be pushed out by accident. The replica does cycle when a battery is plugged in, so it seems it just needs replacement parts and it'll be good to go!

This replica was returned to us due to a cracked spring guide mount. Whilst testing/looking at the issue, there doesn't seem to be much for concern apart from the rare chance that the mount could fully shear off, so a replacement lower receiver would be advisable to prevent this from happening. Aside from that, we were seeing a 290 FPS average from this replica on 0.20g BBs, which is a little lower than standard due to a lower power spring intended to prevent further damage to the mount.

This replica is in the Boneyard with a dysfunctional safe mode. When safe is selected, the AEG shoots in semi-auto (not very safe at all!). The magazine catch was also replaced with a spare, though it supposedly doesn't work very well. During testing we were seeing an average of 330 FPS from this thing on 0.20g BBs, so it's legal to skirmish, just needs a new box magazine to get shooting! It's also Two-Tone blue, so will not require a UKARA or other defence upon purchase.

This replica has found its way into our boneyard with an issue regarding its motor height - whilst firing the replica, its clear that the motor isn't correctly meshing with the bevel gear, causing it to make a grinding noise after cycling. Shooting through our chronograph, we were seeing an average of 305 FPS using 0.20g BBs, so you could quite happily use this at a skirmish - however given the platform is based off a DMR, it could be worth upgrading the spring and locking it to semi as it does have an eshooter mosfet that's programmable to turn it into a fully-fledged DMR!

This replica has a multitude of issues; including a blown MOSFET, low FPS output (prior to the MOSFET being blown), assembly bolt not retaining (most likely due to a missing E-clip if the replica originally had one), and missing inner barrel and screws from the hop unit.

As you can see and understand, there will be a decent amount of work required to get this replica back to its former glory, however it could make for a pretty cool wall hanger regardless given the limited/no damage across the furniture. The magazine originally provided with this platform is also missing, so a replacement will need to be sourced if you intend on getting it shooting again or want to display it with a magazine inserted.

This replica has landed in our boneyard due to a slam firing issue - usually this is down to the sear being broken or too worn down from long-term usage, however this isn't always the case and something more significant may be at play. For this specific replica, it would probably suit best as a wall hanger or prop for the Springfield fans out there...

This replica seems to be completely broken - supposedly the sear is snapped meaning it doesn't cock the spring and fire. Do take note that since the bolt has nothing to engage with but still has spring tension - injury can occur if you don't move your hand from the charging handle (which happened during testing). Alongside this, the box is damaged and the gun is two toned so could potentially be a project gun if replacement parts exist or as a wall hanger. This replica also does not include a magazine.

A non-functional replica with an extremely squashed pinion gear on the motor, likely due to previous excess motor height adjustment. At a glance, we can see that the bevel gear indicates that there's minimal/no damage internally, however a thorough inspection is strongly recommended just incase there are teeth missing on the other side.

The gun's stock and magazine are missing also, but with a couple of internal replacements, a fresh stock and some magazines - you've got yourself a winner here!

This item is being sold as a Boneyard as it has a crack in the lower receiver. This is on the left-hand front, near the magwell. This doesn't affect the functionality of the rifle, it has been tested and fires perfectly fine and while the crack's presence doesn't seem to affect the integrity of the rifle, be aware that an issue is possible to surface in the future.

Close to the crack are a couple of relatively noticeable scuffs, but other than that, the gun is in fantastic condition.

This is a bargain at this price, so grab it before it goes!

This uniquely styled M4 has seen better days... Starting with what you can see in the last image, there is a very large gouge out of the front of the receiver along with several pretty mean cracks. On top of this, the magazine release catch and button are missing, as well as the battery cover at the rear of the platform.

We strongly recommend replacing the receiver if you're intending on skirmishing this thing, however we advise this platform be bought for parts and funky furniture donations from what's remaining and in decent enough condition to go on your next build.

This gorgeous Daniel Defense PDW has landed in the boneyard with numerous faults. The main being a potential wiring issue, as this rifle occasionally shoots full auto bursts whilst in the semi auto position. The AEG is also shooting slightly hot, averaging roughly 360 FPS on the chrono. Finally, the other obvious fault is external damage in the form of scratches and markings on the rifle. If you're a technical Airsofter who knows their way around a gun, this is a bargain rifle to get back up and running with some potential easy fixes and part replacements.

The replica is non-functional. We're unsure as to why it won't function, so there's no guarantee that it is even fixable at all, but is could be a decent project to have to mess around with if you're up to the task! Aside from the functionality, the replica is sporting real wood furniture, though it has been painted in a Two-Tone fashion. It could still make for a good wall hanger or prop despite this.

Caution: When splitting the replica in half, ensure the bolt is pulled back to avoid damaging the bolt and/or hop unit.

This replica is in the Boneyard with a missing magazine latch. A new one will need to be sourced, else it'll be rather difficult to use the replica as it currently is. During testing, we were seeing 270 FPS on 0.20g BBs from this thing - usually we'd say this is quite weak, however chucking in a stronger spring will definitely kill-off this replica so the recorded FPS is perfect.

This iconic WW2 replica has found its way into our boneyard with various faults - the first of which is that a vast majority of its parts are missing, including the cover for the hop assembly alongside some parts that keep the bolt together. Further regarding the bolt, it appears that the spring contained within it is jammed on something and is incredibly hard to pull (it'll stop after a short distance which means you cannot cock the spring in order to fire, rendering this replica non-functional).

There is a random part in the box that we're uncertain on the origins of. The replica is also missing its magazine.

This BOLT BR47 was returned to us due to a stripped piston, rendering the gun non-functional. The AEG is in fantastic condition externally, with a single scratch on the right side of the handguard, beneath the 3 o'clock rail. A great project gun for a tech, or a nice looking wall hanger for the rest of us!

This awesome replica has been returned to us for a variety of issues; The main reason(s) is that the MOSFET is having problems and the fuse is blown, meaning this RIF is not functional. The replica is also very worn, meaning it'll need a bit of TLC to get it to looking as good as it does new. The flash hider is missing grub screws too, so replacements would need to be found to prevent it from coming off unless you want to use a different device.

This rifle needs the love it deserves, as it's a very unique platform given its ambidextrous charging handle which isn't common place for AK replicas.

It's unknown the original reason this replica was returned to us, but during testing, it simply wouldn't shoot at all. We do not know the cause of this. This is a project piece for a techy with an MP7 sized gap on their pegboard, or even just for those who don't care whether or not their guns shoot, but just want the coolest ones!

It must also be noted that this gun's magazine is missing, so a replacement will need to be sourced if you want/need one.

This item is being sold as a Boneyard item due to cycling and feeding issues. They could potentially be fixed by those of you with technical knowledge however at this moment the rifle is being sold as non-functional. 

The receiver is also unfortunately cracked at the rear pin and the pin itself is missing. There are also marks and wear on the rifle as a whole. 

So if you fancy a project to tinker with or simply some spare parts or furniture, think about grabbing this for a discount price!

This Minigun AEG was originally a Two-Toned display piece in our showroom, but recently had its MOSFET scavenged for a warranty repair, meaning a replacement will now be needed to get this one back in working order. Aside form that, there are no other known faults. If you're able to source a MOSFET, you can now turn yourself into an Airsoft juggernaut without even needing a UKARA!

This unique replica has landed in our boneyard due to an issue with its motor cage - it seems that one of the points that the cage secures with the gearbox may have cracked as you can slightly rock the motor cage, meaning the motor will fall out of alignment whilst firing - this could be an easy fix depending on which part is broken, though further investigation will be necessary to see if the motor cage or gearbox shell will need replacing.