Airsoft Attachment & Accessory Discounts

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

A replacement or spare Outlet / Knocker Valve for the Tokyo Marui MK23 SOCOM NBB Pistol. If you own plenty of Magazines and want to keep them in tip-top condition, then you're going to want a few Knocker Valves spare in your arsenal. They are incredibly easy to install, provided you have an appropriate Valve Key on standby. You can use other tools to install them, but this is not recommended as you could damage the Valve.

A dual-bay Battery Charger for the RunCam Scope Cam 4K, allowing you to charge up to two Batteries simultaneously. Whilst the RunCam Scope Cam is amazing and compact, it's Battery Life is limited, and so will be the deciding factor in how much footage you can capture throughout a day. Provided you have enough Batteries on standby, you can record for as long as you like, making this an essential purchase for any serious Airsoft content creator.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you running the historical PPSh, you'll need sufficient ammunition to lay down that all important suppressing fire. With a whopping 540 capacity, the mag is a high-cap design, wheel wound from the bottom, so you won't be switching mags all the time.

To help keep with the realism of your replica, the mag features an alloy outer shell, with a realistic feel and weight. A great mag for those of you that prefer the more historic Airsoft replica, although be aware that this mag is only compatible with the Snow Wolf version of the PPSH41.

If you're running an M82A1 AEG, you need some spare mags for it, and AEGs work best with high-caps, right? This mag from Snow Wolf has a whopping 500 round capacity and is wheel wound from the bottom so you won't be switching mags any time soon.

Constructed from lightweight polymer, this mag helps keep the weight of your huge Barrett down. So grab this mag and start picking people off en masse!

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

An efficient and well-constructed Air Nozzle which is available for a wide range of replicas, and ensures improved durability and smooth operation.

A vital spare for Version 3 gearboxes.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

A replacement or upgrade air nozzle for Airsoft electric SMG-5Ks.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

A set of tempered Bushings from Modify which comes included with installation tools.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

Upgrade your Hi-Capa with some sweet speedy goodness! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look. Being a flat trigger, it is perfect for quick trigger pulls and even quicker target hits. Available in 4 colours so you can match your personalised custom build.

A highly realistic 24mm CW Suppressor/Tracer Unit made from Steel, with an internal rechargeable battery that lasts for thousands of shots. This Tracer Unit is made specifically for AKs that feature a 24mm CW Thread (please check before purchase), and can be charged using the Micro USB Cable just like your Mobile Phone.

If your MK23 is getting a bit worn out, we have the cure right here! Introducing the Tokyo Marui MK23 Hammer set, a set comprising of an alloy hammer, alloy valve knocker, and steel hammer spring. These parts are a drop-in replacement for your original MK23 components, and will not require any modification. Treat your SOCOM to some fresh parts for more *thud thud* "HIT!" action!

If you want to give your LCT AK a modern touch, the M4/AR-15 Buffer tube for LCT Side-Folder AK AEGs will do exactly that! Constructed with a steel folding mechanism and alloy buffer tube, this stock adapter is every bit as well made as LCT AKs and compatible with any LCT AK which uses a side folding AKS-74 style receiver. A detailed compatibility list can be found in the "Full Description" below.

The buffer tube allows practically any M4/AR-15 sliding stock to be installed and provides 5 positions of adjustment, perfect for any body type. If you're working on your PMC primary or want to give your LCT Side-folder AK a taste of modern ergonomics, this is what you need!

A CNC Aluminium Upper Handguard for select LCT LCK (AK) Airsoft Replicas. It offers stunning precision manufacture and a top 20mm Rail for accessories, and is the perfect companion to any Custom Build / Modified AK.

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.