Black Friday Attachment & Accessory Discounts

A complete Switch Assembly for a variety of AEGs, which includes Low Resistance Wiring with either a Mini Tamiya or Deans Connector on the end.

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.

A Steel manufactured Fire Selector for LCT branded AKM models; ideal as a spare part or replacement.

A replacement Gas Block for LCT branded LCK47 models, which is made to the original specification from Steel as a replacement part.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

If you want more recoil and higher muzzle energy from your Tokyo Marui M&P9 GBB, the CowCow 150% Hammer Spring for TM M&P9 Series is what you need. This replacement hammer spring is rated at 150% of the strength of the original spring, meaning your hammer will hit the knocker valve harder and release more gas, translating into harder felt recoil and higher FPS. Naturally, this will shorten the lifespan of your M&P so proceed with caution if this is your first time upgrading a GBB pistol. 

This Guarder upgrade spring is compatible with the Tokyo Marui PSG1 gearbox and provides approximately 100 m/s or 328 FPS muzzle velocity on a 0.2g BB. The spring is made from tempered Si-Cr alloy steel wire to provide the strength and resistance necessary.

A series of Selector Plates from Modify, which are available for a range of AEGs.

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

Had a little mishap when taking your B9 GBB apart? KJW have just the thing. The B9 series GBB magazine catch is an original replacement part, and fits both the KJ Works B9 GBB series and the LS B9 GBB series. The set includes the magazine release and its spring.

Though it is designed by KJW for their B9 GBB series this mag catch may be compatible with other B9 GBBs but we aren't able to test this so please consider carefully before buying.

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.

A series of Steel manufactured Motor Pinion Gears for either the TOP M60/M249 or Tokyo Marui AEG motors.

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

Every good sniper needs good mags. If you're one of the lucky few that wield the Barrett M98B M-RAD, you'll need the round to maximum picking targets off from afar.

This magazine from Snow Wolf has a 280 round capacity with a high cap design, meaning you can pop this mag in and fire for a huge period of time without the need to switch mags.

With a lightweight polymer design, the mag also helps keep your huge rifle's weight down.

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

A replacement upper handguard for LCT branded LCK models which have Polymer furniture, which comes included with a Steel Gas Tube. This kit could also be used to convert a Wood furniture LCK to Polymer furniture.

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

An Alloy constructed "Holographic Red Dot Sight" which is designed for 20mm RIS/RAS, making it compatible with almost every Airsoft Gun. It has tactile Rubber buttons on the side to control the brightness and colour of the classic reticule which these sights are known for.

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

A Steel Constructed Rear Sight Block, made to original specification as a replacement for LCT branded AK models. This is the perfect replacement to a damaged Rear Sight Block.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

A Steel constructed replacement Receiver & Folding Stock for the LCT M70AB2 Airsoft Electric Gun, which features a Stamped Steel receiver and Steel Underfolder Stock, complete with Sling Loop.