All Airsoft Assault Rifles

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

CQB skirmishers, this one is definitely for you! The Specna Arms SA-F21 FLEX™ Carbine AEG; FALCON EFCS Edition is an extremely lightweight platform, weighing in at less than 2kg, this AEG will not slow you down during your battles. The high-density polymer is incredibly durable and scratch-resistant. The SA-F21 FLEX™ is also equipped with the FALCON EFCS MOSFET, which has a programmable ETU that offers multiple different firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes. The preinstalled MOSFET will also protect your rifle from short circuits and burnouts.

If you're a fan of staying stealthy, being light on your feet and giving the enemies a scare by sneaking up on them with the added benefit of not getting tired arms after a long day of skirmishing, then the Specna Arms SA-F21 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is perfect for you!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long. 

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-C05 CORE™ HAL¹ ETU™ M4/AR-15 AEG is a great shout. This M4/AR-15 AEG follows Specna's "CORE" build standard, with a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and keep energy high all day long. 

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. 

This, the latest version of the SA-C08 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're looking for a compact and lightweight AR platform perfect for close-quarters engagements, the Specna Arms SA-C08 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long. 

This, the latest version of the SA-C08 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you like your M16 rifles with a side of M203 grenade launcher, the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU is the rifle for you! This full-metal M16 is based on Specna's ONE™ series but this one is a cut above the rest, featuring the Kestrel Basic ETU. This MOSFET is programmable and offers different firing modes along with plenty of other features, the term "Basic" is definitely underselling it!

The Kestrel Basic offers plenty of features including a 3-round burst and binary trigger firing modes, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with the 6.03mm tightbore inner barrel and rotary HOP-up unit, this M16A4 AEG is well-equipped to complete any mission!

If you are working on a 2000s military loadout and need an M16 with some extra "firepower", the Specna Arms SA-G02 ONE™ M16A4 w/ M203 Launcher; Kestrel Basic ETU has got you covered!

Sneaky skirmishers, this one is for you! The Specna Arms SA-C10 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed linear compensator, a CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C10 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, this one is for you! The Specna Arms SA-C10 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed linear compensator, a CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C10 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Real steel nerds, check this out! The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is a great beginner rifle, easy to pick up and use, superb long-term potential. There is a reason why this rifle style has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers.

The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level. The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Put simply, this allows the SA-E03 EDGE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas. 

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

The SA-C07 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the latest, most advanced AEG from Specna Arms. It features an entry-level price point, with a veteran-level preinstalled ETU. The AEG is also compatible with most Tokyo Marui aftermarket upgrade parts, so it really is future-proof!

This, the latest version of the SA-C07 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

If you're looking for a highly flexible M4/AR-15 platform, the Specna Arms SA-C20 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG should suit you perfectly! Kitted out with some glorious externals with an MLOK-style handguard, crane stock and railed receiver, this M4 is a great choice for any skirmisher!

This, the latest SA-CO5 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you prefer the old days when real men carried full-length rifles, you'll definitely be into the Specna Arms SA-B06 ONE™ M16A4 AEG! This full metal M4/AR-15 platform is based around Specna's original ONE™ series M16A4 but now comes equipped with the Kestrel Basic ETU, a programmable MOSFET which is far more advanced than its moniker "Basic" suggests!

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the M16A4 to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 509mm 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M16A4 AEGs on the market!

Whether you're working on a GWOT-era USMC loadout or you prefer the iconic M16 silhouette to its prolific shorter sibling, the Specna Arms SA-B06 ONE™ M16A4 AEG; Kestrel Basic ETU is the big M4 you need!

If you are looking for an MK18, but you're not interested in keeping to the Milsim bland basic style, then the Specna Arms SA-A03 ONE™ MK18 Red Edition; Kestrel Basic ETU is certainly worth your time. This MK18 is fitted with some stylish red receiver parts, such as the mag release, charging handle and sling plate. The full metal externals give this platform a realistic weight and distribution as well as making it strong and able to withstand even the roughest of skirmishes.

Inside the Specna Arms SA-A03 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

If you need something for busting bunkers or you are hunting an alien lifeform with active camouflage and thermal vision, an M4 with M203 grenade launcher is what you need to get the job done! This bundle combines the SA-G01, a full metal M4 AEG with an M203 40mm grenade launcher pre-installed with a pair of NUPROL 40mm MOSCART Gas Grenades and a big ol' bag of Delta Armory BBs. 

"This gun will make you a god damned sexual Tyrannosaurus, just like us!"

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle, with its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C22 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

The Specna Arms SA-C22 CORE™ HAL¹ ETU™ M4/AR-15 Carbine AEG is the perfect beginner Airsoft rifle, with its preinstalled MOSFET, it is sure to outperform other platforms at a similar price point. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C22 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.