All Airsoft Assault Rifles

If you're in search of a modernised Krinkov replica which is as much of a killer in-game as it is in looks, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG has your name on it! Based around the already impressive CM.113B Zco Custom, this beast has been refined by the talented techs of Bolster Armouries, furnished with some choice internal upgrades and tuned to get the absolute best out of the stock internal parts.

This new generation of Tuned AKS-74U is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the Kestrel Basic ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. Amongst its many advantages over the Kestrel Basic, you can add the Gate Blu-link to program the ASTER™ with its wealth of customisation options on your phone using Bluetooth!

The HOP-up has been enhanced with a Maple Leaf Macaron 60° HOP-up rubber to extend the range out to 60 meters and beyond and to bring the trigger into line with modern AR AEGs, the Bolster Armouries AK Trigger Spacer has been fitted, shortening trigger travel to a hair for an incredible response rate in semi-auto. A Laylax Perfect Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and the sub-par stock piston head O-ring has been replaced with the Bolster Armouries Enhanced Piston Head O-ring to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.113B, perfect for high rate of fire fiends!

While the original CM.113B is a very impressive shooter, the Bolster Boys have ushered forth its true potential in the Bolster Tuned version. If you're ready to dominate your next skirmish with a pre-upgraded piece which hits out to 60 meters with a spectacular rate of fire of 26 rounds per second, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG is ready for you!

A 6mm BB Airsoft electric gun inspired by the Honey Badger series of carbines, and is part of G&G's premier line of high quality Airsoft guns.

If you're in search of an M4/AR-15 AEG and seek a more realistic feel and weight, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is what you need. This full metal M4 platform is a unique Ares design inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and compact PDW sliding stock. One of the coolest aspects of the externals is the Ares slim pistol grip, designed to mimic the dimensions of real AR grips for a GBBR-like realistic feel!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed slim high torque motor to provide a snappy trigger response in semi, ideal for pumping out suppressive fire in CQB. If you want a solidly built, realistic AR that isn't a GBBR, the Ares X-Class Model 6 AR-090E M4/AR-15 AEG is a fantastic choice!

If you have a thing for modernised American AKs, this one should be up your street! The EMG Rifle Dynamics RD-701 AEG; Kestrel Basic ETU is absolutely packed with pre-upgraded internal parts and boasts licensed trademarks from Rifle Dynamics with detailed replica Rifle Dynamics parts across the design. Boasting some incredible pre-upgraded parts from the CYMA Platinum Edition rifles, this AK variant is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

The tracer HOP-up is a rare addition to stock Airsoft rifles, usually a rare innovation only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with this RD-701's other upgraded parts and flawless build quality. The RD-701 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, a high-speed Neodymium magnet motor and much, much more!

so, if you fancy treating yourself to an AK platform, the EMG Rifle Dynamics RD-701 AEG is a great high-performance option, plus, its party trick of lighting up tracer BBs without an aftermarket tracer unit required!

If you're in search of a pre-built DMR, the Secutor Rapax XXI M9 SR-25 DMR AEG should be on your radar. This full metal SR-25 style AEG is pre-locked to semi-automatic via the Ares EFCS MOSFET inside and hits out at an impressive 440 FPS on 0.2g BBs. Its quick-change spring system allows easy power tuning to meet your local site's limits, and if you get bored of DMR duty you can reprogram the fire controls using the Ares EFCS programmer (available separately) to switch back to full auto or burst mode.

Equipped with an M-LOK/20mm Picatinny hybrid handguard, a pre-installed micro suppressor, an ergonomic pistol grip and adjustable DMR stock, the Rapax M9 DMR is built like a tank externally and looks fantastic. Its ambidextrous controls make the Rapax a fine choice for left-handed marksmen or those who like to make use of both shoulders to get good cover and its ultra-modern external design makes it great for modern loadouts. If you were planning a DMR build with an SR-25 base gun, no need to bother, Secutor has done it for you with the Rapax XXI M9 SR-25 DMR AEG!

If you're hunting for a super-compact GBBR for close-quarters work, the EMG CGS Daniel Defense DDM4® PDW GBBR should be in your sights! This full metal M4/AR-15 GBBR platform is based on the real steel Daniel Defense DDM4 PDW, a real steel AR "pistol" designed for use in tight quarters and when moving in and out of vehicles. Naturally, this beast is licenced by Daniel Defense, rocking immaculately engraved trademarks across the design, only deviating from the real thing in its inclusion of an actual stock instead of the "pistol stabilising brace" found on the real thing to please the ATF. 

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you're into GBBR platforms and need something honed for CQB, you can't ask for much better than the EMG CGS Daniel Defense DDM4® PDW GBBR! With a snappy trigger response, above-average rate of fire, fantastic build quality and internals based around the best of the best in the GBBR world, this thing is one to watch in close quarters!

The BO Dynamics DIAMONDBACK DB15 AP300 7" M4/AR-15 AEG is a lightweight and beginner-friendly rifle, it is constructed from a high-density polymer that is scratch-resistant. It also features a preinstalled Helios trademarked muzzle attachment that looks incredible. This package also includes an 11.1V crane battery, a balance charger and 2x 20mm Picatinny rail sections. This is a brilliant deal for new players and is a great way to get your Airsoft career started.

This AEG is also equipped with a MOSFET and programmable firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes and will protect your rifle from short circuits and burnouts.

If you're a fan of staying light on your feet, sneaking up on the enemies and generally causing mayhem on the battlefield, then the BO Dynamics DIAMONDBACK DB15 AP300 7" M4/AR-15 AEG is perfect for you and your playstyle!

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

Those looking for a lightweight backup weapon with a fully-fledged special forces style look you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real-world platform and the PDW style stock makes it very compact and optimal for close-quarters battles.

The ST46 is constructed from both alloy and polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. A high-density polymer receiver may be less realistic, but it will not show scuff marks as readily as an alloy receiver might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. Its MOSFET protects the internals from any electrical damage and also improves the trigger response. If you need a lightweight solution, either as a primary or a backup, the S&T ST46 Sports Line PDW M4/AR-15 AEG is the perfect rifle for you!

A full metal electric powered M4 based Airsoft gun with a four point RIS handguard, sliding stock and removable carry handle. 

If you're in search of a full metal MK18 replica with solid build quality and top-tier performance, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best options out there! Officially licenced by Daniel Defense via EMG, this full metal AR is rocking full DD trademarks, a superb replica of the RIS II quad rail handguard and CYMA's Platinum E-Edition internals, giving it museum-worthy looks and intense downrange effect.

Inside, you'll find a reinforced V2 gearbox with CNC steel 13:1 high-speed gears, a CNC aluminium ball bearing piston head, a CNC aluminium double O-ring cylinder head, 8mm ball bearing bushings and a high torque neodymium magnet motor. Also present inside is a 6.03mm tightbore inner barrel and alloy rotary HOP-up unit, giving you the range and accuracy to get the job done at long ranges. The pre-installed Kestrel Basic ETU adds some advanced functions into the mix, offering programmable fire modes including a 3-round burst and binary trigger and 6 levels of adjustable pre-cocking; a major improvement over the Zeus MOSFET of the original.

The perfect platform for a US Navy SEAL loadout with a mission-ready feature set with plenty of room for accessories, there are many reasons the MK18 MOD.1 platform is so favoured amongst Airsofters. This, the EMG CM.105 Daniel Defense MK18 MOD.1 AEG; Kestrel Basic ETU is one of the best out there, capable of going toe-to-toe with the best both in the tight confines of CQB and in outdoor environments!

The G&G Armament SOC16 ETU is a replica of the M14 SOCOM, made to a tough standard using High Density Polymer for the Stock and Alloy for the the rest of the Rifle. Thanks to the long Inner Barrel, this model is incredible accurate and comes out of the box at 340FPS. Considering it is ready for 11.1v LiPo Batteries out of the box, thanks to the G&G MOSFET and ETU, then this is one deadly Rifle you don't want to miss.

Looking for a MK18 Airsoft AEG? Who isn't these days? As the rifle of choice for US Special Forces the MK18 has been immensely popular amongst both Milsim skirmishers due to its authenticity and more casual skirmishers who appreciate the MK18s practical feature set and aggressive looks. 

The CYMA CM.105 is a fully licenced replica from the CYMA Platinum series, sporting pre-upgraded internals with a high speed motor, tight bore inner barrel and ETU/MOSFET to regulate cycling and offer battery protection. The CM.105 differs from other Platinum AEGs with its official licencing from Daniel Defense through EMG in the US. This allows CYMA to add beautifully engraved authentic trademarks and a licenced DD MK18 rail system to their already impressive Platinum setup for what might be the ultimate AEG MK18!

If you are running an up to date Russian Milsim loadout, or you are a fan of the AK design and you are looking for the latest and greatest, the Arcturus AK-12K would suit you well! The AK-12K sports full metal construction with an impressive number of steel parts, a microswitch trigger, a well-equipped gearbox and a 6.01mm tightbore inner barrel with a newly designed rotary HOP-up unit to ensure your BBs fly straight and true. This AEG has the hefty, solid feel we would expect from a mostly steel AK platform, and is the perfect primary for the AK fan who demands a realistic feel and flawless attention to detail.

This Airsoft gun is a replica of the famous L85 / SA80 used by the British Armed Forces as their standard issue rifle. This Airsoft replica is G&G's offering into the L85 replica range, and features their new ETU and MOSFET systems allowing the use of 11.1v LiPo for a reliable rate of fire and easy trigger pull, and to top it all off: electric blowback.

If you like an aggressive military-style AR with real steal trademarks, the CYMA COLT CGS 14.5" M4A1 RAS SOPMOD GBBR should suit your needs. This full metal gas blowback rifle is based on the real steel M4A1 in SOPMOD Block 1 configuration, equipped with a CNC aluminium 20mm Picatinny quad rail patterned after the real steel KAC RAS. This is the perfect platform for a US Army impression!

Internally, this beast is based on the Tokyo Marui ZET system, giving you the best current option for GBBR internals with the widest aftermarket for upgrade parts. You won't need many upgrades though; with almost entirely steel trigger parts, a steel bolt carrier, a steel bolt catch and a 6.03mm tightbore inner barrel, the CGS M4A1 is probably the best out-of-the-box GBBR available currently!

The Cobalt Kineticts Team BAMF Advanced Airsoft Electric Gun is built like a tank, using CNC Machined Aluminium for the Upper and One Piece Lower Receiver, as well as Pistol Grip and Stock. It has the same Auto Ejecting Mag System as the real firearm, and will stop firing and eject the mag once empty.

Looking for a decent all-rounder Airsoft AEG with an interesting backstory? The MC51 from Jing Gong may have what it takes! This AEG is based on the real steel MC51, a G3 based rifle designed by FR Ordanance in the UK and intended to replace the MP5 in service with the SAS. The rifle served with the SAS for a brief period before it was replaced with the much more sane HK53, a 5.56mm derivative of the G3. This was due to the uncontrollable recoil of the MC51, and though its mighty 7.62x51mm cartridge provided the power the SAS were seeking, it proved too much to make a practical close-quarters rifle. 

The MC51 may have left service in a hurry, but it still lives on in the form of customised G3 and HK91 rifles in the US, the land of the free and home of those who absolutely love hard recoiling rifles with blinding muzzle flash! 

If you have an AK-shaped hole in your arsenal the Double Bell BY-023 AKM AEG should fill that void! This AK rifle replica has all the classic AK features any enthusiast of Kalashnikov's Automatic Rifle will appreciate, including real wood furniture, a large proportion of steel in its construction, authentic Russian markings and a mix of mock and real rivets in all the right places.

On the inside, the Double Bell AKM is equipped with a selection of internal upgrades to give it the edge over rivals in its price range, including a 6.05mm tightbore inner barrel, 8mm steel ball bearing bushings and a quick change spring system for easy power tuning with no need to open the gearbox. Whether you need a real wood and full metal AKM replica to complete your collection or to give the enemy team what for in a skirmish, the Double Bell BY-023 AKM AEG will see you well equipped in that unique Russian style!

The M907E is one of the latest guns from Double Eagle (DE) Airsoft featuring their latest Electronic Fire Control System which allows for 1-5 Round Burst, a Bump fire Trigger, and boasts a gearbox and battery protection system. Not only does the replica come with an intelligent control system, it is based off he M4 platform, and comes with a full length top rail and MLOK hand guard to many customisation options.

An electrically powered Airsoft AEG based on the M4 Platform, and highly modified to be compact and effective, to make a high quality CQB powerhouse. The rifle is constructed by G&G and is part of their GT Advanced range, some of the highest quality rifles in their arsenal. 

If you want the standard M4 layout but prefer standing out on the battlefield, the EMG CM.108 Spike's Tactical Spartan M4/AR-15 AEG is a great choice! This rifle will certainly have you feeling stoic, boasting a skeletonised handguard and a very unique Spartan magazine well, extremely unconventional and not seen before in Airsoft.

The CM.108 is what happens when EMG, CYMA, and Spike's Tactical join forces to make a fully licensed, full-metal Airsoft replica. It features a striking, skeletonised handguard and is complete with RIS and M-LOK rails, as well as adjustable mechanical aperture iron sights.

Stand out from the crowd with your own officially licensed, custom M4 SBR, which is perfectly weighted and perfectly balanced for a sweet look and an even sweeter skirmish experience. Plus the CM.108 comes equipped with CYMAs Platinum series internals, including a silent piston head, high-speed motor and high-speed gearset.

In the real world this rifle exists as a civilian-legal hunting rifle, based off the G36 platform which everyone loves so much, but is usually unable to acquire due to their limited Armed Forces/Law Enforcement accessibility. In the world of toy guns, this is an Airsoft electric powered 6mm fully automatic replica.

A highly realistic 'Military' model of the Cyber Gun FAMAS F1, which features a MOSFET and No-Magazine Detection to stop the gun from firing without the Magazine. The MOSFET stops the gun from firing every 25rnds to mimic the real capacity of the FAMAS, allowing you the best of using a High Cap Magazine, and getting to do realistic reloads in the field for maximum immersion.

Finally released, the highly anticipated QRF Mod.2 is a pistol calibre style AR replica built by KWA to the highest of standards, with an excellent build quality, finish, and wide range of features to make this an absolute beast of an Airsoft Gun. This variant of the QRF features straight g-series style magazines, and a flat style stock butt plate. The replica even comes with upgraded externals right out of the box, with a high quality PTS Syndicate removable flip-up iron sight pair and PTS polymer pistol grip.

This Airsoft AEG features a range of features designed to make it dominate in CQB environments, but is also performs great outdoors as well. With a short compact design the replica features a sliding PDW style stock allowing you to take corners more aggressively without the fear of snagging for tighter more consistent game play. 

This replica is perfect for those Airsoft skirmishers who are looking for a pistol calibre AR, or for those who need a gun for tight CQB engagements.

The VZ.58 is not an AK, do not get confused! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the DA-VZ58 features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you are after a DMR to match your UKSF loadout, you have found it. The Umarex HK417D AEG is a seriously well built and faithful replica of the HK417, chosen marksman's rifle for special forces all around the world. Put this down next to a real HK417 and you will be hard-pressed to pick out the right one for your Milsim skirmish!

If you're in search of an M4/AR-15 AEG and want a more realistic feel and weight, the Sector ASTRA III Shadow M4 AEG is what you need. This full metal M4 platform is inspired by the most modern AR platforms in the real steel world, boasting a uniquely design receiver with waffle gripping texture, an M-LOK handguard and a compact low profile stock. It also features ambidextrous controls, making it perfect for all skirmishers!

Inside, we are equipped with a version 2 gearbox with 18:1 steel gears, a quick change spring system and the Ares EFCS MOSFET, providing programmable fire controls using an Ares EFCS programming box (not included) and low voltage cutoff to protect your battery. The EFCS also improves electrical efficiency and pairs perfectly with the pre-installed high torque motor to provide a snappy trigger response in semi-auto, ideal for pumping out the suppressive fire in CQB. If you want a solid short rifle that feels super realistic in the hands, the Secutor ASTRA III Shadow M4 AEG is a fantastic choice!

Disturbingly brilliant, this rifle takes the best of both worlds and combines them into one. Love it or hate it, the Trident 47 SPR-M from Krytac is truly a unique beauty; an AR-style platform which accepts AK-style magazines!

Building a WWII-themed loadout, but you want something in between an SMG and a full-sized rifle? The M1 Carbine from King Arms has your name on it! This handy little Carbine is powered by CO2, and is a gas blowback rifle with a fully reciprocating bolt and charging handle giving an immensely fun firing experience and making it very realistic.

The Carbine is constructed entirely from aluminium with a real wood stock, and tips the scales at around 2.6KG with the magazine inserted and loaded, which is bang on the loaded weight of the real thing. All the small details of this Carbine are spot on to the late war issued M1 Carbine, and it feeds from real capacity 15rnd CO2 magazines, making it perfect for the more serious re-enactment events.