Airsoft Receivers & Receiver Parts

Combining style and performance isn't always easy, but Airsoft Masterpiece has quite clearly mastered the art! The Airsoft Masterpiece EDGE "LimCat" Aluminium Frame can be described simply as premium. The build quality, materials, machining and finish are all premium. With this frame, you can give your TM-compatible Hi-Capa the state-of-the-art look it deserves.

The name "LimCat" refers to LIMCAT CUSTOM INTERNATION, a company that specialises in custom pistol parts, for both Airsoft and real steel sidearms. Their engraved logo is found on the right side of the frame and depicts a menacing Tiger and with this frame, your Hi-Capa is sure to become a ferocious beast just like the real thing!

The frame is available in various metallic colours to give your pistol a designer look sure to stand out on the battlefield. Its design has been created to push aesthetics and performance to the max. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa pistol designs.

It comes with a tactical accessory rail that measures 3.5cm long, meaning it should accommodate most common pistol flashlights. If you want only the best for your Hi-Capa pistol, both style and performance, then the Airsoft Masterpiece EDGE "LimCat" Aluminium Frame is what you need!

Combining style and performance isn't always easy, but Airsoft Masterpiece has quite clearly mastered the art! The Airsoft Masterpiece EDGE "LimCat" Aluminium Frame can be described simply as premium. The build quality, materials, machining and finish are all premium. With this frame, you can give your TM-compatible Hi-Capa the state-of-the-art look it deserves.

The name "LimCat" refers to LIMCAT CUSTOM INTERNATION, a company that specialises in custom pistol parts, for both Airsoft and real steel sidearms. Their engraved logo is found on the right side of the frame and depicts a menacing Tiger and with this frame, your Hi-Capa is sure to become a ferocious beast just like the real thing!

The frame is available in various metallic colours to give your pistol a designer look sure to stand out on the battlefield. Its design has been created to push aesthetics and performance to the max. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa pistol designs.

It comes with a tactical accessory rail that measures 3.5cm long, meaning it should accommodate most common pistol flashlights. If you want only the best for your Hi-Capa pistol, both style and performance, then the Airsoft Masterpiece EDGE "LimCat" Aluminium Frame is what you need!

Combining style and performance isn't always easy, but Airsoft Masterpiece has quite clearly mastered the art! The Airsoft Masterpiece EDGE "LimCat" Aluminium Frame can be described simply as premium. The build quality, materials, machining and finish are all premium. With this frame, you can give your TM-compatible Hi-Capa the state-of-the-art look it deserves.

The name "LimCat" refers to LIMCAT CUSTOM INTERNATION, a company that specialises in custom pistol parts, for both Airsoft and real steel sidearms. Their engraved logo is found on the right side of the frame and depicts a menacing Tiger and with this frame, your Hi-Capa is sure to become a ferocious beast just like the real thing!

The frame is available in various metallic colours to give your pistol a designer look sure to stand out on the battlefield. Its design has been created to push aesthetics and performance to the max. This frame is designed to work with parts that adhere to the Tokyo Marui standard and will not work with proprietary or unique Hi-Capa pistol designs.

It comes with a tactical accessory rail that measures 3.5cm long, meaning it should accommodate most common pistol flashlights. If you want only the best for your Hi-Capa pistol, both style and performance, then the Airsoft Masterpiece EDGE "LimCat" Aluminium Frame is what you need!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you want the 9mm look for your UTR45, Hades Airsoft have what you need! The MP5/SMG-5 AEG Magazine Adapter for UTR45 fits the top of SMG-5 magazines and allows them to be loaded into the Double Eagle UTR45 AEG, giving you more magazine options than ever before. 

The adapter is constructed from 3D-printed polymer and is an adapter for the magazine and not for the gun, meaning you will need one adapter per SMG-5 magazine you plan to use. The perk of this system is that you can use your normal UTR45 magazines and complement them with SMG-5 magazines with adapters without having to change anything, including low, mid, high-caps and even drum magazines! 

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

If you've misplaced parts from your dust cover, this set should cure that! The Delta Armory Steel Dust Cover for M4/AR-15 AEGs is a replacement original part set for Delta Armory M4/AR-15 platform AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the dust cover, axis pin, c-clip, and spring.

If you've lost important parts from your mag release, this set should sort you out! The Delta Armory Magazine Release Catch for M4/AR-15 AEG is a replacement original parts set which includes the mag catch, spring and screw, though the button itself is not included. Compatibility-wise, this set is intended for Delta Amory M4/AR-15 AEG platforms but should also fit most other brands. If your mag release spring went flying or your screw got lost in the carpet, this set should get you back up and running!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

An Aluminium constructed charging handle extension for AK style replicas.

If you've lost your bolt catch, you're in luck! The Delta Armory Mock Bolt Catch for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but may also fit certain other brands, provided they don't have a functional bolt catch and use a bolt catch style which sits in the receiver recess and isn't retained by screws or a pin. This bolt catch is constructed from alloy and is the standard milspec design.

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the front receiver pin and retention screw and both are constructed from steel.

If you are looking for custom parts to add some unique character to your M4/AR15 AEG to set it apart from all the others, you have found the perfect part! The 1A1 CNC bolt catch from Gate replaces the original dummy bolt catch on your M4/AR15 AEG with a precisely made alternative with a unique skull-shaped paddle. This part doesn't provide any function but looks really cool, so if you are after an aesthetic tweak for your custom M4 AEG then this part would be perfect for the job!

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you are styling your AAP-01 up this part would be great to add a bit of flair to your custom job. The Upper Receiver Lock Button from CowCow is constructed from aluminium, making it stronger than the original, but more importantly, it is available in several exciting colour options! Available in tactical black for more discrete builds or gold, red and glorious heat gradation for those looking for a more eye-catching pistol, the CowCow upper receiver lock button is great for any AAP style!

If you are styling your AAP-01 up this part would be great to add a bit of flair to your custom job. The Upper Receiver Lock Button from CowCow is constructed from aluminium, making it stronger than the original, but more importantly, it is available in several exciting colour options! Available in tactical black for more discrete builds or gold, red and glorious heat gradation for those looking for a more eye-catching pistol, the CowCow upper receiver lock button is great for any AAP style!

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

If you are upgrading your VSR platform sniper rifle to the max an enlarged bolt handle can help when it comes to pulling back a mighty upgraded spring! With this in mind, Laylax conceived the PSS NEO Bolt Handle, designed for use with the Tokyo Marui VSR-10. This bolt handle should also fit VSR-10 clone sniper rifles but as with any upgrade parts, modification may be necessary.

The bolt handle and base are constructed from aluminium and the bolt handle has machined grooves to make it easier to grip in wet weather. The bolt handle is also at a turned-down angle to ensure it clears your scope, no matter how big it is. Marked on the handle and base are helpful instructions on how to use your rifle, in case you hadn't already figured that out! The laser engravings read "1 LIFT THE BOLT HANDLE" "2 PULL >>>>>>" and "3 FIRE". Thanks for the help, Laylax!

If you are planning a modern SMG-5 build I have great news for you! You can ditch that dowdy old cocking handle and swap it out it with this ACR-esque modern replacement from CYMA. Made from sturdy Alloy and designed in a thoughtful way, featuring a lightening cut to keep weight down and grip surfaces where you need it, unlike the original. The CYMA extended cocking lever gives ergonomic advantages together with looking operator-af. Suits an M-LOK handguard perfectly!

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.