PARRA No. 4644 Wolverine Hard Case

PARRA
Code: PRA-464
899.00 kr
Was 1,669.00 kr
Save 770.00 kr
  • Third Party Tested
  • Water / Dust / Shockproof
  • Durable Construction

The Wolverine Hard Case, like the animal, is dedicated to the fierce protection of all nestled within. The Case is decked out with four layers of Pick and Pluck Foam that can be customised to perfectly fit around your items, reducing movement and damage in transit. The Case has a Rubber Seal that prevents the ingress of Water and Dust, and the tough construction protects contents from Extreme Temperatures and Impacts, as well as featuring a Pressure Relief Valve to balance the inner Pressure of the case when travelling to new altitudes.

Full description

Description

This Hard Case has very deep dimensions and a good width, which makes it extremely good at containing all your equipment in one space. Whether you're a Tabletop Gamer who needs to stuff an entire army away safely, Photographer with 93 different lenses that you definitely didn't tell the other half about, or you're preparing for the apocalypse by hoarding every Night Vision Unit you can find, then the Wolverine Hard Case will suit you nicely. The Case is constructed from heavy duty Polypropylene (PP) and Glass Fibre mix which is lightweight yet extremely strong, with the reinforced sections lining up with small feet allowing you to stack the cases without them sliding around. The case is well thought out, with a breathable air valve as well as a durable rubber seal which protects the contents from dust and liquids. A Heavy Duty Grab Handle with Rubber Sleeve can be found on the side of the Case to assist with carrying it, which will fold away when not in use for extra-compact storage.

The Wolverine Hard Case comes with multiple foam layers designed to keep you valuables safe and secure during movement. The lid of the case features egg shell foam to prevent the contents from sliding when closed, and a foam separator piece on the bottom of the case. The case also comes with four thick pick and pluck layers allowing you to customise the shape of the foam to make the perfect fit to the items you intend to store. The panel is cut and separated into cubes which can be pulled out to create the shape of the item you want to store inside, preventing the contents from sliding around inside the case and keeping them even more safe. Pick and Pluck foam is perfect for those who want to store lots of small items in once case without worry of them sliding into each other and causing damage, such as for a collection of Warhammer, smaller Drone equipment or camera accessories, for example.

The case is fully IP Rated and tested by a 3rd party quality assurance company to give you the confidence you need to put your trust in the case, tested for Waterproofing, Impact Resistance, Immersion, and Temperature Tests. The case is IP rated IP67, meaning that the case is fully dust tight and waterproof, making it great for transporting electronics as well as sights and scopes. The case can be submerged in water up to 1m for 30 mins meaning that you don't have to worry about rain or splashes during transport, and your equipment will come out as dry as when you put it in there. The case is tested for temperatures between -40°c and 90°c allowing the case to remain strong no matter the weather conditions.

The case features heavy duty clasps designed to keep the case secure, with two strong dual movement clasps which make the case easy to open, but give an extremely strong lock for transport. The case also features two pad-lock holes to protect from tampering, allowing for both standard padlocks to be used as well as TSA approved locks, allowing the case to be used for transport on Airlines. The case is secure enough to make it enough of a challenge for anyone wanting to try and get to the contents.

The case features an automatic pressure valve which equalises the pressure inside the case to be the same as outside, without allowing water into the case whilst keeping the internal pressure balanced. This is absolutely essential for those who will be travelling great distances and altitudes, as pressure changes can damage very sensitive equipment.

The Wolverine Hard Case is the perfect companion for Airsofters, Photographers, Drone Enthusiasts, Tabletop Gamers or anyone who needs to transport or store delicate equipment and needs to know that their case is fully protected against the elements. Be it Water, Dust, Impacts or Pressure changes, this is the case for those who need something they can trust.

Features

  • Perfect for storing Sights and other Attachments
  • Perfect for storing Hard Drives and Electronics
  • Ideal for a Tabletop Gaming Army
  • Ideal for Camera accessories and Drone equipment
  • Small enough to store in other cases and backpacks
  • Built from durable Polypropylene (PP) and Glass Fibre mix
  • IP Rated up to IP 67
  • Watertight design to prevent water leaks
  • Protected against water submersion up to 1m for 30 mins
  • Dustproof to protect contents
  • Crushproof build for transport
  • Reinforced exactly where needed
  • Secure dual movement clasps
  • Folding grab handle for compact storage
  • Rubberised grip handle to prevent slippage
  • Automatic pressure valve to balance interior pressure
  • Stainless steel hinge pins
  • Padlock holes for using a TSA lock or during storage
  • Protects in low temperatures down to -40°c
  • Protects in high temperatures up to 90°c

Package Includes

  • PARRA No. 4644 Wolverine Hard Case
  • Wave Foam Lid Insert
  • Foam Separator base insert
  • Pick and Pluck Foam Storage Inserts

Specification

General

Colour Wheel Greyscale
Item Colour
Black
Material Icon
Material
  • Fiberglass
  • Polypropylene
Product Length
Approx. 46.6cm
Product Width
Approx. 39cm
Product Height
Approx. 35.1cm

Case Related

General

Case Size
Medium
Recommended For
  • Helmet
  • Attatchments
  • Sights
  • Tools

Case Features

Ratings
IP Rating
IP67
Certificate Issuer
Intertek
Certificates
High Temperature IEC60068-2-2 Fifth Edition
Immersion MIL-STD-810 F Notice 3 Method 512.4
Impact Resistance Test - ATA300 Revision 8.0 B-2-5
Low Temperature IEC60068-2-1 Sixth Edition
Waterproof IP67-IEC60529 Edition 2.2 Clause 13.6 and Clause 14.2.7
Protection
Waterproofing
Icon - Waterproof
Waterproof
Dust Proof
Yes
Crush Proof
No
Shockproof
Yes
Air Valve
Yes
Rubber Seal
Yes
Minimum Temperature
-40°c
Maximum Temperature
90°c
Padding
Padded
Yes
Padding Material
Soft Foam
Padding Type
  • Thin Base Separator Padding
  • Eggbox Foam Lid Insert
  • Pick and Pluck Separator Foam x 4
Latches
Latch Types
Dual Movement Clasp
Latch Count
2
Handles
Grab Handle
Yes
Handle Type
Rubberised Carry Handle x 1
Wheels
Has Wheels
No
Security
Security Features
Padlock Holes

Dimensions & Weight

Weight
Weight KG Icon
Weight (KG)
Approx. 5.35kg
Weight With Padding
5.5kg
External
External Length
Approx.46.6cm
External Width
Approx.39cm
External Height
Approx.35.1cm
Internal
Internal Corner Radius
Approx.7.09mm
Base
Base Internal Depth
Approx.28cm
Base Internal Lower Length
Approx.40.9cm
Base Internal Lower Width
Approx.29.5cm
Base Upper Length
Approx.43.6cm
Base Upper Width
Approx.32.8cm
Lid
Lid Internal Depth
Approx.4.459cm
Lid Lower Length
Approx.41.5cm
Lid Lower Width
Approx.28.6cm
Lid Upper Length
Approx.43.6cm
Lid Upper Width
Approx.32.8cm