Novritsch Accessories

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

The Novritsch 100rnd Magazine for P90/SSR90 Gen.2 AEGs is more transparent than other magazines allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! Novritsch has also slightly tweaked this magazine design so it fits better into P90/SSR90 Gen.2 AEGs, giving you smoother reloads even in the heat of the moment, when the adrenaline is pumping! It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

If you need spare magazines for your Novritsch SSG10 you have found them! The 28rnd Transparent Magazine For SSG10/VSR10 Sniper Rifle is constructed from transparent polymer to allow you to keep track of your remaining ammo without having to remove the magazine mid firefight! Once again, Novritsch hits the nail on the head; being able to check your capacity by inverting your rifle means you will never be caught dryfiring at a critical moment.

The mag holds 28 BBs and can be loaded through the fill/feed port at the top front of the mag using a speed loader or loading rod. Compatibility-wise, this magazine is ideal for the Novritsch SSG10 sniper rifle but should also work in other VSR10-based designs such as the JG BAR10, Tokyo Marui VSR10 variants and the CYMA CM.701. Lock and load with the added assurance that you will never take aim, steady your breathing and press the trigger only to send a big fat nothing downrange!

If you're lucky enough to own a Novritsch SSP1 or SSP5 GBB pistol, load up on these! The Novritsch 29rnd Green Gas Magazine for SSP1/SSP5 GBB is constructed from alloy with a polymer baseplate, brass valves and rubber O-rings. Compatible with most Hi-capa 5.1 GBB pistols but made especially for the SSP1 and SSP5 pistols from Novritsch. 

Filling the mag with gas is as simple as sliding the baseplate off and inverting the mag to fill, as you would with other green gas magazines. Loading the BBs can be done through the feed lips with a speed loader equipped with a GBB adapter but you can also pull the follower down and load through the widened section at the bottom. If you want to maximise your kill potential, load up on mags!

If you want to keep your Novritsch Hi-Capa in the game for longer, load up on these! The Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 is compatible with most Airsoft Hi-Capa GBBs and ideal for SSP1, SSP2 and SSP5 platforms from Novritsch. Like other green gas magazines, the fill valve is on the baseplate, requiring both the magazine and your gas container to be inverted to fill. 

Loading BBs can be carried out either through the feed lips or the follower channel when the follower is pulled and held down, either using a speed loader or by hand. If you're running a Novritsch 'Capa, a few of these are essential to keep it doing what it does best!

If you need more mags for your SSR63 A1 to keep up with that devastating rate of fire, here you go! The Novritsch 150rnd Mid-cap Magazine for SSR63 A1/AR36 AEGs is compatible with the A1 variant of the SSR63 platform and also fits in other AR36 AEGs provided they have the standard magazine well and not the AR mag conversion.

Like any standard AEG mid-cap, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Also present on this magazine are the unique AR36 magazine linkage lugs which allow several magazines to be linked together for faster reloads.