New Airsoft Guns & Products

If you're looking for a super compact chest rig, the Delta Armory Tactical Buckle Up Vest is perfect for you. This low-profile chest rig is based on a famous real steel design used when mobility is a priority and space is restricted, including work inside vehicles, carrying out reconnaissance and duking it out in confined spaces. 

The rig is made from Nylon fabric with polymer buckles and steel eyelets for drainage, it features two M4 magazine pouches, and additional zip pouches on each flank for some gear such as small radios, grenades, multitools or other mission essentials. The chest rig's size is adjustable using the straps but it can also be removed from the straps and instead clipped into a compatible chest rig or plate carrier.

If you like the liberating feeling of skirmishing in a simple chest rig which carries everything you need, the Delta Armory Tactical Buckle Up Vest should put a smile on your face!

If you're looking for a super compact chest rig, the Delta Armory Tactical Buckle Up Vest is perfect for you. This low-profile chest rig is based on a famous real steel design used when mobility is a priority and space is restricted, including work inside vehicles, carrying out reconnaissance and duking it out in confined spaces. 

The rig is made from Nylon fabric with polymer buckles and steel eyelets for drainage, it features two M4 magazine pouches, and additional zip pouches on each flank for some gear such as small radios, grenades, multitools or other mission essentials. The chest rig's size is adjustable using the straps but it can also be removed from the straps and instead clipped into a compatible chest rig or plate carrier.

If you like the liberating feeling of skirmishing in a simple chest rig which carries everything you need, the Delta Armory Tactical Buckle Up Vest should put a smile on your face!

If you're looking for a super compact chest rig, the Delta Armory Tactical Buckle Up Vest is perfect for you. This low-profile chest rig is based on a famous real steel design used when mobility is a priority and space is restricted, including work inside vehicles, carrying out reconnaissance and duking it out in confined spaces. 

The rig is made from Nylon fabric with polymer buckles and steel eyelets for drainage, it features two M4 magazine pouches, and additional zip pouches on each flank for some gear such as small radios, grenades, multitools or other mission essentials. The chest rig's size is adjustable using the straps but it can also be removed from the straps and instead clipped into a compatible chest rig or plate carrier.

If you like the liberating feeling of skirmishing in a simple chest rig which carries everything you need, the Delta Armory Tactical Buckle Up Vest should put a smile on your face!

If you have a Hi-Capa-shaped hole in your heart and are seeking a realistic experience, the EMG R611-3 STACCATO 2011 Hi-Capa P GBB is what you need. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 P, complete with licensed trademarks across the design in engraved, laser engraved and embossed form, very fancy.

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO P is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with premium styling and stand out from the crowd, the R611-3 STACCATO 2011 Hi-Capa P GBB from EMG belongs in your loadout!

Introducing the VULKAN Advanced AK AEG, Bolster Armouries first AK platform. Built to the same exacting standards as previously released ONYX, ARKOSE, ATLAS and ONYX [Blackout] platforms with a development period far longer than intended, the VULKAN performs to perfection and boasts the finest external parts available on the AK aftermarket; a perfect blend of rugged Eastern utilitarianism and luxurious Western ergonomics.

Based on the LCT LCK104 AEG with little of the original platform remaining, the VULKAN is dressed to impress with an authentic Magpul Zhukov-U Handguard paired with an MOE® AR-15 Stock, offering a highly functional marriage of sleek styling, M-LOK modularity and real steel robustness. LCT's Railed Top Cover, AR Buffer Tube and X47 Enhanced Selector Switch complete the metamorphism, with the 5KU DTK-2 Muzzle Brake enhancing the already brutal aesthetic.

Inside, you'll find flawlessly installed high-end parts from all the biggest names in the Airsoft aftermarket, including Gate Electronics, FPS Softair, Laylax/Prometheus, RetroArms, Warhead Industries, Lonex and Maple Leaf, resulting in performance to rival if not best the Bolster Armouries flagship AEG, the incredible ONYX. Each trigger press produces an instant response with incredible accuracy and range, reaching out to 60 meters comfortably with an impressively tight grouping. Flick the fun switch and all hell breaks loose as the VULKAN emits an astonishing 30 rounds per second with flawless feeding and minimal heat build-up, meeting the Bolster Armouries performance parameters and then some!

As with previous Bolster Armouries platforms, the VULKAN allows you to unleash pure performance guilt-free, knowing your primary was assembled and tuned by talented techs who take pride in their work and simply will not let anything less than perfection leave the workbench, evidenced by the Bolster Armouries 24-Month Dedicated After-Sales Service Programme supplied with each Bolster AEG. This is the premium Airsoft experience, now in AK flavour!

If you're working on a beast of a sniper rifle, the Trusight TDC Conversion Kit for VSR-10 will get you there! This TDC HOP-up conversion set is a very impressive design, providing TDC functionality for reduced side-to-side deviation and a stronger HOP-up effect without requiring your outer barrel to be drilled!

That said, limited modifications to the TDC carrier are required due to purposely being made off-spec. This allows you to get the perfect fit for your specific HOP-up chamber by carefully filing it down with hand files. Installation instructions are available on the Trusight Website but for those who don't like reading, check out the video here.

The main benefits of this set over other TDC kits are it doesn't require any permanent modifications to your original VSR-10 parts and you won't need to carry an Allen key in-game or ruin the looks of your VSR with a dial on the top of the barrel as you'll be using the original slider adjuster. Compatibility-wise, this set is designed specifically for the Tokyo Marui VSR-10 series but may also fit VSR-10 clones, though extra modification may be needed for a perfect fit.

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

With this muzzle device you can keep your AEG looking like the real thing! The VFC Bird Cage Flash Hider replicates the real M4 muzzle brake seen on service rifles and is constructed from steel with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

Its steel construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage.

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the  Vector Optics Picatinny Rail Section for KeyMod; 124mm is what you need! This 20mm rail section is constructed from Aluminium and has 124mm of available rail space, so you can mount your mission essentials anywhere. This rail has a sleek skeletonised look, with weight-reducing cutouts and less angled corners, keeping your rail slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the Vector Optics Picatinny Rail Section for KeyMod; 124mm is ideal. KeyMod is cool but you can't go wrong with some extra 20mm Picatinny rail space!

If you're running one of the newer G&G platforms with the G&G rotary HOP-up, check this out! The Airtech Studios TDC Conversion Set for G&G Rotary HOP-up Unit is intended to provide maximum performance from your original G&G rotary HOP-up unit. Designed specifically for the latest G&G rotary HOP-up design, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original outer barrel to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your G&G Rotary-equipped AEG to reach out and touch the enemy at crazy ranges, this TDC Conversion Set is what you need!

If you want to ramp up your semi-auto speed and you run a G&G, you need this! The Airtech Studios STC™ Speed Trigger Converter for G&G AEGs is designed to reduce trigger travel to a hair, allowing you to seriously spam semi in the most efficient way possible.

The STC is designed to fit a wide range of G&G AEGs (full compatibility list on Airtech Studios Website) and makes use of your original trigger, reducing trigger travel by 80%! This set will require opening the gearbox to install so we don't recommend it for newcomers. If you're a CQB player needing an edge, this will do it!

If you need to carry some extra mags into battle you need this! The FMA Kydex Double Holster for Pistol Magazines fits the most common 9mm and other small magazines. This includes magazines for pistols such as EU/GLOCK, CZ P-09, B9 and F226.

Slide your magazines in the holsters and the polymer retention system will keep them secure. If you're struggling to insert or remove magazines, there is a Phillips head screw in the centre of the holster that can be adjusted to tighten or loosen the magazine insert area.

The holster attaches to belts using the paddle back, it fits on belts with a 2" width or less, meaning it should fit on most common tactical belts. With the FMA Kydex Double Holster for Pistol Magazines you can carry your pistol magazines easily and with style, just make sure to bring enough for the battlefield!

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

If you've had motor issues and need a cheap replacement, here you go! The VFC Long Shaft Ferrite Motor is a standard-speed long shaft motor for M4/AR-15, SMG-5 (not K), G3 and P90 AEGs. The set includes a pre-installed O-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

This VFC 4" Barrel Extension will sit on the end of your current 14mm outer barrel and provide 4" of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get your muzzle device to sit perfectly on the end of your platform. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors on platforms which you previously couldn't.

If your 1911 Pistol had an underwhelming performance in the cold weather, you need a CO2 magazine and the performance will be much better! CO2 is much better in cold weather and yields a far, stronger recoil, meaning gassing out is a thing of the past! Also remember that CO2 does not contain any lubricant of its' own, and so you will need to lubricate your Pistol regularly using a Silicon Lubricant, such as: Abbey Silicone Gun Oil 35 Spray.

Just remember that the laws of physics still apply, and if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol. Please ensure that all CO2 has been used in the Magazine before attempting to remove the Bulb, as it could still be under pressure. Excess CO2 is best used by firing the Pistol, rather than pressing the knocker valve on the back of the Magazine.

Keep your 1911 performing well no matter the weather with the WE 15rnd CO2 Magazine for 1911 GBB Pistols, come rain or snow your 1911 will still be able to complete the mission.

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

If you're thinking of making a gearbox from scratch or you've had a disaster with your current anti-reversal latch or ARL spring, the VFC Anti Reversal Latch For V2 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, making this ideal for upgraded AEGs with strengthened gearsets.

The anti-reversal latch in your airsoft electric gun is responsible for preventing reverse motion of the gears, which could cause damage to your piston and gears if it happens during a cycle of the gearbox.

This Anti-reversal latch set is intended for version 2 gearboxes and is a great spare or repair to have in your toolbox for those who like a bit of DIY when their AEGs stop cooperating. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it for relatively cheap too!

The VFC Tappet Plate For V2 Gearbox is designed for use with version 2 gearboxes. It is specially constructed with reinforced polymer to be strong yet flexible enough to bend slightly. The plate is extremely lightweight and is designed to be attached to the air nozzle and sector gear inside your Airsoft rifle. This process controls the feeding of BBs from the magazine into the hop-up chamber so they can be shot.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate. If your primary is having issues and you need a Tappet Plate for repair, the VFC Tappet Plate For V2 Gearbox has you covered!

If you're looking for a strong and lightweight nozzle for your P90, check this out! The FPS Softair CNC POM Nozzle with O-ring for P90 AEGs is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in TM P90s and clones. The nozzle also includes an internal O-ring to maximise air seal and its ultra-strong POM construction is ideal for high rate of fire or high FPS setups.

FPS Softair is a fantastic company, offering high quality upgrades for unbeatable prices, all designed and manufactured in Italy. The techs at FPS recommend lubricating the nozzle step of your piston head before installation using silicone lubricant. If you're working on a beast of a P90 build and want it ready for anything, the FPS CNC POM Nozzle with O-ring for P90 AEGs is what you need!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If you need a rifle mag pouch which fits your bigger DMR magazines and such, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M14 mags to G3 and SCAR-H magazines. It is uncertain if 417 magazines will fit in this pouch.

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring numerous rigs, the Delta Armory Adjustable MOLLE Open Magazine Pouch for M14/SCAR-H/SR25/G3 is the pouch you need!

If your fully laden combat belt keeps slipping down, this will help! The 8Fields Tactical Universal Tactical Harness for Belt is designed to fit any belt but is ideally used with padded MOLLE combat belts set up for heavy loads. The harness is constructed from a mix of 1000D Polyester and Nylon and features 4 attachment points to ensure the weight of your belt is distributed evenly across your shoulders.

On each shoulder, we're treated to convenient admin loops designed to keep comms cables and hydration hoses neat. On the rear, we have a small section of Velcro designed for morale or I.D patches so you can give your rig the personal touch. We recommend pairing this harness with a padded combat belt like the 8Fields Tactical Padded MOLLE Belt but it should work with almost any belt, whether it is a simple rigger belt or a chunky combat belt. If you prefer carrying your kit on a belt but don't want to keep pulling it up, the 8Fields Tactical Universal Tactical Harness for Belt will keep it pulled up for you!

If you've dropped your SigAir 100rnd Mid-Cap Magazine and now the baseplate is damaged, then you're in luck! The VFC SigAir Polymer MPX AEG Replacement Magazine Baseplate fits only these magazines and comes with a steel screw so you can instantly replace your broken or marked baseplates. It is only compatible with these magazines and will not fit on other magazines.

The baseplate features SigAir trademarks on the bottom, we imagine nobody is really going to notice these, but when you reload your MPX John Wick style, your teammates and foes alike may catch a glimpse of the trademarks when you get your own cinematic slow-motion shot.

The NUPROL Bell Target is a great way to practice your accuracy with your Airsoft platforms, Air rifles or slingshots in your back garden. It is constructed from steel, strong enough to survive the impact of any projectile you decide to send at it. Just remember to wear some eye protection in case of a ricocheting BB or equivalent.

When shooting the targets, if your shots are hard enough, you can knock them up and then reset them all by shooting the top target. This will drop the bottom targets back down ready to shoot them again. Every time you hit the target you'll be treated with a satisfying ping noise.

If you fancy an easy way to practice your aim in the comfort of your own back garden, you need the NUPROL Bell Target, you'll be a deadeye marksman in no time!

If you're tricking out your M4/AR-15 AEG, the G&G Armament M4 AEG Pistol Grip is a great affordable option! This grip follows the standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.

The style of this pistol grip replicates the real steel "A2" finger-ridged pistol grip commonly found on military-issue M4, M16 and MK18 rifles. This grip has an ergonomic design with a finger ridge for improved comfort whilst aiming down sights and carrying your platform. The set includes a heatsink motor baseplate pre-installed. If you're going for a military-style build, this is the grip for you!

The Double Eagle PDW Style stock for M4/AR-15 Rifles is a great replacement or enhancement for your platform with a "Honey Badger" receiver. Due to the width of the alloy stock bars, it only fits this style of receiver and will not fit standard M4 receivers. It provides 3 adjustment positions, so you can decide how compact you want your playstyle to be. To adjust the stock position, press down both buttons located on either side of the stock then slide the stock to your desired position.

The butt plate is constructed from high-density polymer and features a skeletonised design, it provides comfort and security when wearing full-body gear and operating from modern shooting stances. The buffer tube has an angled cheek pad for improved comfort when aiming down sights.

The battery compartment is located within the buffer tube and can be accessed by pushing down on the tab on top of the buffer tube. It provides roughly 11cm of battery space allowing for most common batteries. However, you must ensure that you select an appropriately sized battery, so that you don't crush it in the tight space.

For those working on a build which pushes the limits, you will require some decent gears! Introducing the VFC Avalon 18:1 Steel gearset, a standard ratio gearset constructed from hardened steel. The set includes a spur gear, sector gear, and bevel gear which are all precisely machined for perfect meshing and smooth, reliable performance.

These gears are tuned to an 18:1 ratio, which means for every 18 revolutions of your motor the gearbox will complete one full cycle. The benefit of using standard ratio gears is that you can make either a DMR or a high-rate-of-fire CQB beast without wholly committing to one or another, meaning you can adapt your build to the scenario which suits, and without overstressing the gearbox by running it considerably beyond its design parameters.

Treat your AEG to some premium gears and have it shooting consistently for a long long time, plus you have the flexibility of running a DMR one day, then alternating to a rapid-fire monster the next day!