Airsoft Hop Up Units & Buckings

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If you're building an AEG for maximum longevity and consistency, the Laylax Black Hop-up Rubber - Extra Soft will be an asset to your operaation. This HOP-up bucking is extra soft, making it ideal for full auto assault rifles, and is extra effective when paired with an OMEGA or OHM HOP-up nub. It offers an airtight design that promotes consistent FPS and HOP so your BBs will reach their destination successfully, time and time again.

Compatibility-wise, this is a standard AEG HOP-up rubber and should fit the vast majority of Airsoft AEGs on the market but may require expertise and tuning to fit. If you're getting out-ranged and out-performed on the battlefield, the Laylax Black Hop-up Rubber - Extra Soft belongs in your Airsoft replica.

If you want to push your VSR-10-based sniper rifle to the absolute pinnacle of accuracy, a TDC mod should do the trick! The Hades Airsoft TDC HOP-up Unit Set for VSR-10 Sniper Rifle is designed to replace the original HOP-up arm and adjuster, providing direct pressure to the top of the HOP-up nub and bucking to eliminate side-to-side shot deviation.

Installing this TDC unit will require some extensive, irreversible modifications to your base sniper rifle, so we only recommend this set for those who are confident with power tools and have a decent level of Airsoft technical knowledge.

The unit requires you to drill a hole through the top of your outer barrel using either a 5mm or 5.5mm drill bit and the included drill guide, inserting the guide into the stripped outer barrel to ensure the hole is drilled in the right place. Hades also recommends that when the modification is complete, that you glue the TDC unit to your outer barrel using super glue or another strong adhesive.

If you are the type of sniper that likes to get their hands dirty with modifications and you want your VSR to outrange and outshoot the rest, this kit will do it!

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

If you're running an MTW platform and want maximum performance from your HOP-up, the Airtech Studios TDC Conversion Set for MTW Phoenix HOP-up is what you need. Designed for both the original MTW polymer HOP-up unit and the Phoenix CNC aluminium unit, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original HOP-up unit to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your MTW to really send 'em, this superb HOP-up enhancement kit will do the trick!

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you seek more accuracy and range from your AEG, a HOP-up upgrade is the first place to start! The PTS Syndicate MEC HOP-Up Bucking for AEGs; Twin Pack includes a black HOP-up rubber and a purple one, equipped with a bridge-style contact patch to minimise side-to-side deviation and maximise accuracy. 

The black HOP-up rubber is designed for 295-360 FPS builds, being made from 60-degree hardness rubber and the purple 70-degree rubber is intended for high FPS DMR builds hitting out at 360-460 FPS on a 0.2g BB. If you're the techy type with a build on the go at all times, the PTS MEC HOP-Up Bucking for AEGs; Twin Pack is a great set to have in the toolbox!

Are you having HOP-up troubles with your M4 platforms? Delta Armory has you covered! This HOP-up chamber is a replacement part and comes with all the necessary pieces for installation, including the HOP-up rubber and nub. The main chamber is made from a sturdy plastic polymer and is compatible with all M4 style AEGs which have V2 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Delta Armory HOP-up chamber is an affordable replacement for M4/AR-15 AEGs, fix up those old primaries and get them shooting again with this low-price solution.

If you seek more accuracy and range from your AEG, the Prometheus Bridge HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, these are the "Bridge" style design with a central groove designed to reduce side-to-side deviation, focussing on maximum accuracy and providing the smallest grouping possible. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs. 

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

Designed specifically for the Gate EON CNC Rotary HOP-up chamber, the Airtech Studios Full Upgrade Set for Gate EON HOP-up Chamber includes a TDC trolley, 2 x M-nubs and an inner barrel centring unit. This set is designed to convert the Gate EON into a true TDC unit, giving you more range and accuracy than ever before!

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require a certain amount of expertise to install but thankfully, the process is fully explained on the Airtech Studios website. If you want to get the most out of your Gate EON HOP-up chamber, this kit will do the trick!

If you are having HOP-up troubles with your M4 platforms, don't worry, G&G has just the thing for you! This HOP-up chamber is a replacement part and comes with the necessary pieces for installation, but does not include a HOP-up rubber or a nub. The main chamber is made from high-density polymer and is compatible with all M4-style AEGs which have V2 Gearboxes. It's a reliable and high-quality replacement part that will help your AEG shoot like brand new again!

The rotary adjustment dial is the latest and greatest way of setting your rifle's HOP. It is much more accurate and provides finer increments of adjustments when compared to previous gear-style HOP-up adjustments.

If you're working on the ultimate AK AEG build, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is an integral part! This CNC machined HOP-up unit is made from 7075 Aluminium, granting it steel-like strength and flawlessly precise machining with the weight reduction perks of aluminium. 

The most unique aspect of this HOP-up unit is the inclusion of what RetroArms call the "collet nut", a threaded nut which seals the gap between the inner barrel and HOP-up chamber walls. This saves you any messing around with PTFE tape and ensures your platform's air-seal is perfect, resulting in more consistent FPS readings translating to improved accuracy downrange. 

The set includes everything you'll need to complete the HOP-up unit with the exception of the bucking, nub and inner barrel but will require assembly. As such, we only recommend this HOP-up unit to those confident working on Airsoft internals. Best used with the RetroArms CNC Version 3 Gearbox but compatible with almost every TM-based AK AEG on the market, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is a fantastic upgrade option for performance-oriented AK build!

Turn your stock ASG Scorpion EVO's HOP-up chamber to a TDC design without having to replace the whole unit. This kit includes everything you need to install the system into your current HOP-up chamber. It is compatible ONLY with ASG Scorpion EVOs and will not fit in any other HOP-up systems.

TDC (Top-Down-Centre) HOP units are incredibly sought after due to the increased friction they add to BBs, which increases the effectiveness of the HOP applied to your BBs. By installing TDC to the stock HOP-up you are guaranteed compatibility with the platform.

The set also includes rubber nubs, these ensure the HOP is stable while BBs accelerate through the unit, further improving the performance and consistency of your ASG Scorpion EVO. This is a very complex installation process and we only recommend it if you are confident in your understanding and ability to fit it to your HOP-up chamber.

A replacement Hop-Up Unit for Airsoft AK Rifles, designed and constructed to high standards by Action Sports Games in Denmark as part of their Ultimate Upgrade Parts Range. 

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This ARCTURUS Polymer Rotary Hop-Up Unit W/Magwell Spacer For Ak Serie is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Magwell Spacer is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well to protect it and prevent over-insertion. We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

Compared to the Autobot, this hop up rubber is far stronger and has a flatter shaped contact patch inside. 

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

This TDC hop up chamber from TTI is made from CNC aluminium, it is made for Hi-Capa GBB handgun replicas from Tokyo Marui / WE. This hop-up chamber has a TDC adjustment system operated via a notched wheel at the bottom of the chamber.

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!