- Bluetooth 5.2/GCS app
- Built-in voltage boost converter
- Ultra-precise telemetry measurements
Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.
Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.
The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.
With mind-blowing optical trigger sensor, the TITAN II allows you to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.
The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
Gate proudly presents their latest generation of MOSFET systems - The Titan II. This newest iteration of MOSFET now includes Bluetooth 5.2 connectivity, which is compatible with most mobile devices as well as upcoming tactical gadgets in Gate's ecosystem in addition to further improvements to the suite of sensors that the TITAN II offers.
The new TITAN II has a mind-boggling array of trigger sensitivity settings available, with over 50 settings for the first millimetre of trigger travel alone. Via its gear movement sensor, the TITAN II has the ability to track the movement direction of each tooth of each gear, making this the first MOSFET in the world with this capability, providing unparalleled cycle control.
The TITAN II provides am extraordinary amount of functionality, including pre-cocking, burst mode, binary trigger, adaptive active braking and trigger sensitivity adjustment. The optical sensor suite within the TITAN II is used to track the movement of the gears, piston, and trigger to ensure the gears complete a full cycle with each trigger pull and the gears stop exactly where they should.
Just like its predecessor, the TITAN II has remarkably low power consumption and includes a "sleep mode" which activates when your AEG has not been fired for some time. This has been improved in the second iteration of the TITAN which boasts a remarkably low current draw, a mere 0.1mA which is ⅓ that of the previous TITAN. This protects your battery in the event that you forget to disconnect it after a skirmish while other MOSFETs may drain the battery entirely over time, rendering the battery useless.
Features
- Mind-blowing trigger sensor with the TITAN V2 sensor
- Ability to set hair trigger with ludicrous precision
- 50 sensitivity levels for the first millimetre of trigger movement
- Brand new patented gear sensor
- Detects each gear tooth and the direction of gear movement
- Mechanical protection of trigger sensors - increases reliability
- A potential trigger sensor's damage now covered by warranty
- Ultra-precise telemetry measurements thanks to the new current sensor
- Pre-cocking can be set in %
- Built-in voltage boost converter
- Trouble-free operation in low temperatures
- Multifunctional programmable port for connecting:
- Bolt-catch button
- HPA compatible
- User-friendly GCS app for iOS, Android, macOS, Windows, watchOS and Wear OS
- Compatibility with the GATE Ecosystem including GATE STATUS and future devices
- Minimal current consumption. Deep sleep mode with only 0.1 mA current consumption prevents battery discharge (3x lower consumption than in current ETUs, which already had the lowest current consumption on the market)
Package Includes
- Gate TITAN II Bluetooth MOSFET ETU for V2 Rear Wired; Basic Firmware
Specification
General
|
Parts & Accessories Type
|
Internal Parts
|
|---|---|
|
Internal Part Type
|
MOSFET
|
 |
 |
Weight and Dimension
 |
Approx. 0.188kg
|
|---|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
|
Package Includes
|
MOSFET
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.