Delta Armory Airsoft

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in. 

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction. 

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If you need BBs for a mix of CQB and outdoors, 0.25g BBs are what you need! The Delta Armory 0.25g Diamond 6mm BBs are supplied in a resealable bag of 4000 and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you need BBs for outdoor skirmishes, 0.28g BBs are what you need! The Delta Armory 0.28g Diamond 6mm BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you're looking for high-grade 0.25g BIO BBs, the Delta Armory 0.25g Diamond 6mm BIO BBs are ideal. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. 

These are the BIO version, meaning they're made from biodegradable PLA polymer which allows you to magdump all day long with a clear conscience out in the wonderful woodlands. Being 0.25g in weight, these BBs are suitable for practically any Airsoft platform shooting within standard skirmish energy limits (<1.14 joules) and their ultra-tight tolerances should provide superb accuracy potential!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're looking for a speed loader with the perfect combination of capacity and portability, the Delta Armory 450rnd Speed Loader is a fine choice. Based on the original Tokyo Marui Speed Loader XL design, this loader is patterned after real steel NATO STANAG 5.56 magazines and as such, fits nicely into M4/AR-15 magazine pouches. 

This speed loader is designed primarily to load Airsoft mid-cap and low-cap magazines through its fill aperture at the top rear of the body and can be filled through the fill window on the bottom. To deploy the thumb plunger, simply pull the textured sliding button rearwards and it will pop out, ready to load. Stowing the plunger again is equally easy; simply push it down and slide the button forward to lock it in place. 

Also present on the top is a fold-out adapter for GBB pistol magazines, meaning you can load your AEG or GBB with the same loader, saving you space on your rig. An additional adapter for wider feed lips is also included, giving you plenty of options and allowing you to load almost any Airsoft gun without resorting to breaking your thumbs! If you need a speed loader to take into battle with respectable capacity and not too much bulk, the Delta Armory 450rnd Speed Loader will sort you out!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to avoid the pain of crawling on thorns or taking those stinging knuckle shots, these Combat Gloves from Delta Armory will do the trick! The gloves are available in a range of different colour options suitable for any loadout or environment, with olive drab, black, green or tan up for grabs.

Delta's gloves are characterized by good protection of the parts of the hand where impact is most frequent - palm, finger joints and knuckles. With foam pad on the thumb, index, middle and ring fingers, you can crawl all day in comfort in these affordable tactical gloves and never feel nettles or thorns!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top.

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you're an outdoor skirmisher with a long-range-focussed setup, Delta Armory 0.32g Diamond 6mm BIO BBs are what you need to feed it! These finely polished Airsoft BBs are constructed from a biodegradable polymer and flawlessly polished for maximum accuracy and reliable feeding. 

Supplied in a resealable bag containing approximately 3120 BBs, these bio BBs have uncompromisingly tight tolerances of +/- 0.01mm with a guaranteed weight difference not exceeding 0.01g. If you need a bio BB with the perfect combination of heavy weight, affordable price and tight tolerances, Delta Armory's 0.32g Diamond 6mm BIO BBs are exactly that!

If you need BBs for CQB or use in your sidearm or shotgun, 0.20g is the ideal weight for you! The Delta Armory 0.20g Diamond 6mm BBs are supplied in a resealable bag of 5000 and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

If you need some hefty BBs for your upgrade platforms, Delta Armory's 0.30g Diamond 6mm BB are the perfect choice for your skirmishes. These BBs are supplied in a 1KG resealable bag of 3333 BBs approximately and boast ultra-tight tolerances and a highly polished surface; exactly what you need to make the most of an upgraded HOP-up and maximise your long-range accuracy potential!

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're running a DMR or an enhanced platform then the Delta Armory 0.30g Diamond 6mm BBs are what you need to feed it!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you want to add more rails to your M4/AR-15 AEG without adding more weight, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 will do the trick! This quad 20mm Picatinny railed handguard is styled after the real steel KAC FF RIS, with 7" or 9" length options rocking 20mm Picatinny rails at all points of the clock, ready for your choice of accessories.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you're looking for affordable mods or are working on a lightweight polymer sleeper build, the Delta Armory 20mm Picatinny RIS Handguard for M4/AR-15 is ideal!

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

If you're building a DMR or accurised AEG, the Delta Armory BERSERKER R-Hop Bucking Bundle for AEG is what you need to achieve maximum range. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the BERSERKER bucking is shaped to fill the HOP-up window on your barrel, just like home-brewed R-HOP setups of old. The advantage of using a BERSERKER set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you use heavy BBs and need a range increase, this set will do exactly that!

Whether you are working on a military-style build or want a red dot sight with a uniquely tough exterior, the Delta Armory Holo-552 Style Red Dot Sight is well suited to your needs. Constructed from aluminium with an integrated 20mm Picatinny rail mount, the Holo-552 is ready to be mounted on any Airsoft gun with a 20mm Picatinny top rail and is set at the perfect height for use with a flip-to-side magnifier. 

Offering the iconic multi-function reticle matching the real thing perfectly with a choice of red or green colour options via the "NV" button, the Holo-552 allows you to shoot fast up close using only the outer ring of the reticle or take precise shots using either of the two central dots at longer ranges. Reticle brightness is fully adjustable, with 5 settings for each colour so you can set it perfectly for the ambient lighting conditions. If your next attachment is going to be a red dot and you appreciate the military styling of the iconic Holographic Sight, the Holo-552 from Delta Armory is a fine choice!

If you've been checking out LPVOs searching for the ideal stand-in for the KS-1 optic, the Delta Armory 1-6X24IR LPVO Rifle Scope is a great option. Measuring a mere 23.7cm approximately, this is the shortest "short dot" we have seen for this price and a fantastic affordable alternative to the currently unavailable Vortex 1-10 LPVO used on the British Army's latest service rifle, the L403A1 AIW. 

LPVOs are rapidly gaining in popularity, both in the real steel world and Airsoft, offering a does-it-all optic which is great for short-range and long-range scenarios. Whether you mount it on an assault rifle, DMR or sniper rifle, the 1-6X24IR LPVO Rifle Scope offers all the functionality you'll need along with superb eye relief for fast target acquisition and compatibility with goggles and face masks. 

Offering full adjustment for windage and elevation via locking tool-less adjustment turrets, red or green reticle illumination with 5 levels of brightness, a pre-installed dual ring mount for 20mm Picatinny rails and a generously included CR2032 battery to get your reticle glowing, the 1-6X24IR LPVO Rifle Scope is ready to tackle targets at any range and the perfect addition to any mid-range build, KS-1 or otherwise!

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!