CYMA Airsoft

If your CYMA CM.098 or CM.057 needs a revamp, the CYMA Stainless Steel Cylinder for CM.057 SVD & CM.098 SR-25 AEGs should be of use. This stainless steel cylinder is ribbed to promote heat dissipation and polished on the inside for minimal friction. 

This cylinder is a standard bore unported cylinder and is compatible with version 2 long gearboxes found in CA/A&K SR-25 AEGs and CYMA CM.098 SR-25 AEGs and also fits the Real Sword spec SVD gearbox used in the CYMA CM.057 SVD/SVU series and the Real Sword SVD Dragunov. 

If you've got leaky M4 ZET system mags, these could help fix them up! The CYMA CGS Enhanced M4 ZET System Gas Route Bucking 70 Degrees - Set includes 5 gas route buckings/seals for TM ZET system M4 GBBR magazines constructed from 70-degree hardness rubber for temperature resistance and improvements in strength. 

Not only a handy spare to have on hand for anyone with TM ZET system M4 magazines, these gas route buckings can also help improve gas efficiency by reducing gas leakage between the magazine and nozzle, especially if you've installed a CGS nozzle or bolt carrier group into your TM. The CGS Enhanced M4 ZET System Gas Route Bucking is compatible with Tokyo Marui and CYMA CGS M4 magazines and should also fit the Double Eagle M4 ZET system magazines. 

This SR25 Gearbox set by CYMA is designed to fit right into most SR25 / AR25 / AR10 style Airsoft Rifles / Guns. Included is a Piston, Cylinder, Gear Set, Tappet Plate, Nozzle. This GEARBOX set does not come with the shell, internals only.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

The CYMA CGS Feed Lips & Gas Route Bucking Set for ZET System M4 GBBR provides 5 sets of feed lips and 5 gas route buckings for your magazines, allowing you to fix up old mags or keep spares handy just in case. This set is designed for TM ZET system M4 GBBR mags and should also fit clones of the TM design, including CYMA CGS M4 GBBR mags and Double Eagle M4 GBBR mags. 

The included feed lips are an ideal spare part to have on hand; as any experienced GBBR user will know, dropping a hefty gas mag is likely to break the lips and render the magazine useless. The Gas Route Buckings are also very useful in the event your magazine develops a leak from the top, and can also help improve gas efficiency should you decide to upgrade your TM or Double Eagle M4 GBBR with a steel CGS bolt carrier group. If you're getting in deep with ZET system GBBRs, this set belongs in your toolbox!

An incredibly imposing drum magazine that holds a whopping 550 rounds, and is constructed from a dense Alloy for a tough and long-lasting finish. Providing the Thompson M1A1 CM.033 with the classic Gangster-Gun aesthetic that we've infamously come to know and love. 

A very unique and eye-catching upper rail and front handguard modification for SMG-5 Airsoft electric guns, allowing you to convert your SMG-5 AEG into an intimidating CQB monster.

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

An electric powered 6mm Airsoft M4 styled weapon that is majoritively made from high density Polymers to keep the weight down, and after a few hours of carrying around you'll be thanking them for it!

The CYMA CM.041SD6 High-Speed is an SMG-5 Platform Airsoft Electric Gun, which has been upgraded internally to provide an awesome Rate of Fire. A reinforced Version 2 Gearbox awaits inside, with goodies such as Steel Gears, Steel Rack Piston and other anodised CNC internals, to create an SMG-5 that performs like no other.

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

If you're looking for the ideal GBBR to base your custom build on, you just found it! The CYMA CGS 10.5" M4A1 CQB GBBR is based on the original M4A1 in CQBR configuration, with the classic ribbed handguards, L.E stock and A2 pistol grip. This means either you can run it plane Jane in the classic configuration or build your own custom GBBR without wasting high-end parts.

Not that this platform lacks high-end parts! Inside you will find the same majority steel internal parts and 6.04mm tightbore inner barrel as its Noveske and Daniel Defense cousins. The most important aspect of this GBBR is its internal system which is based on the Tokyo Marui ZET system and enhanced by CYMA's GBBR wing, known as CGS. If you like thunderous recoil, a full metal build and externals just waiting for your own custom touch, the CGS 10.5" M4A1 CQB GBBR is the one to go for!

If you need to mount a sling to your M4/AR-15 AEG, CYMA has just the thing! The Steel Ambidextrous Sling Plate for M4/AR-15 AEG is designed to mount between the buffer tube and receiver and should fit the vast majority of M4/AR-15 AEGs from various brands (Not BOLT, TM NGRS or GBBRs).

The plate is constructed from steel to provide ample strength to support even the heaviest of ARs and provides a sling loop on either side so you can set up your sling for either left or right-handed use. The sling loops should be compatible with most "hook" type slings and can be paired with a front sling point if you prefer a two-point sling setup.

If you're looking for a spiffy new flash hider for your SMG-5, you've come to the right page!

Constructed from sturdy alloy, this flash hider sports a birdcage style design, quickly and easily attached / detached using the handy tri-lug attachment system. This flash hider is designed for use with CYMA CM.041 models, however it should fit other brands of SMG-5.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you need a new cylinder head to fix up your Dragunov, check this out! The CYMA Aluminium Cylinder Head for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and is fitted with two O-rings to seal any gaps between it and the cylinder for perfect efficiency and minimal air loss. 

The cylinder head also has a sound dampening pad installed on the rear face which reduces gearbox noise and protects the piston head from the force of repeated impacts. A replacement original part for the CYMA CM.057 SVD/SVU series, this cylinder head is also compatible with the old Real Sword Dragunov SVD!

Is your AR stock too long? Maybe you carry a PDW AR15 AEG as a secondary but don't fancy the additional weight of a PDW sliding stock? The CYMA ultra-compact M4 stock may well be what you have been searching for.

This fits on a normal AR15 buffer tube but is optimized for use with a shortened buffer tube, making it even more compact. The butt plate can be removed similarly to a full-sized crane stock if you have a small enough battery to fit inside this lil' guy! This would also work well with a battery sling.

If you need a set of backup iron sights to finish off your build, CYMA has something that might interest you! The CYMA Polymer Flip-up Iron Sight Set for 20mm Picatinny rails offer tool-less adjustment, ambidextrous flip-up buttons and compatibility with 20mm Picatinny rails, meaning they fit on any Airsoft rifle with 20mm rails, which these days is most of them!

The sights offer two rear apertures to aim with, a smaller one for semi-automatic fire and long-range use and a wider one which is well suited to full auto fire and low light conditions. The sights can be deployed by pressing the textured section at the front of each sight from either side, after which they can be manually raised into position. Adjustments can be applied via the dial on the right side of the rear sight, which will move the aperture from side to side, and in the centre of the front sight post which will raise and lower it for elevation adjustments.

While few people actually use their BUIS in-game other than in emergencies, a set of backup iron sights are one of those small details which really help finish off a realistic build. Give your primary a professional look with the added confidence that you can still aim, even if left your red dot sight turned on since the last game!

If you want to squeeze a bit more range from your CM.703 or CM.707 sniper rifle this upgrade kit will do it! The CYMA Upgrade Kit For CM.703/707 Sniper Rifle includes an aluminium piston, aluminium ball bearing spring guide and M175 main spring which should provide approximately 575 FPS with a 0.2g BB when installed in a rifle with good air seal.

As always, we recommend checking the FPS/joule limits of your local site before installing the spring, but the piston and spring guide can be used with the standard spring in your rifle to provide improved strength and long-term durability if your site limits your rifle to 500 FPS.

If you've stripped a gear in your CYMA or Real Sword SVD, you're in luck! The CYMA Steel Gear Set for CYMA/Real Sword SVD/SVU is a replacement original parts set for the CYMA CM.057 SVD/SVU AEG series and should also be compatible with the Real Sword Dragunov SVD. 

The gears are constructed from steel and come as a set of 4, replacing all gears inside the unique SVD gearbox. These gears are not compatible with the A&K Dragunov SVD, only the CYMA CM.057 series and the Real Sword Dragunov. 

If you want to add a modern touch to your AK, the CYMA Aluminium KeyMod Handguard for AK-47/74 is what you need! This CNC Aluminium handguard is equipped with KeyMod negative space attachment slots at 3, 6, & 9 o'clock with a 20mm Picatinny rail running along the top, ready for a PMC-style forward-mounted red dot sight. 

On each side, we are treated to a pre-installed 20mm Picatinny rail adapter for KeyMod, giving you the option of using more common 20mm Picatinny accessories or removing the adapters to mount more modern KeyMod solutions. The handguard itself is constructed in two parts, allowing you to use both or simply the upper or lower handguard, depending on your build requirements. If you're going for the modern tactical AK look, the CYMA Aluminium KeyMod Handguard for AK-47/74 is perfect for your build!

If you own a CM.127, CM.127S or ASG XP17 Challenger and your mag release has gone missing or broken it's your lucky day! The CYMA Magazine Catch & Spring for CM.127 AEP is a replacement original parts set for the CM.127 and CM.127S AEPs but should also fit the ASG XP17 Challenger AEP. The set includes the mag catch itself and the spring.

If you want to restore the factory fresh look to your workhorse AK, this part may be of use. The Rear Sight Block for the CM.04x Series is an original replacement part for AKM and AK74 rifles of the CM.04x series. This part will not work on AKS-74U AEGs, but should otherwise fit AKs which use the LCT style of construction. The sight block is constructed from alloy and comes with steel pins to mount it, and includes the handguard disassembly lever but does not include the rear sight or the rear sight leaf spring. The surface finish of this part is a rough textured finish which is a close match for the hard-wearing paint applied to Russian AK variants of the 1960s and onwards.

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox; Front Wired is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and is set up for front-wired AEGs. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs. 

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui. 

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

A replacement original selector switch set for the CM.041 SMG-5 Series of AEGs. If your selector switch is a bit worn, no need to put up with it! Replace your old selectors with some fresh ones and have your SMG-5 looking great again!

If your CM.041 SMG-5 has a loose or rattly charging handle, this might solve it! The CYMA Charging Handle Spring Catch for SMG-5 is a replacement original part for the CM.041 series and will work on the -SD models but not the -K. This part braces the spring inside the receiver and keeps your charging handle tight and in place. If you pull your charging handle back and there is no spring tension and the handle loosely wanders around in the cocking tube, you probably need a new one of these!