CYMA Airsoft

If you are a Dragunov fan but you want the latest and greatest version of the iconic Russian DMR rifle, this is what you need! The CYMA CM.057T is a great replica of the SVD-M, the latest SVD variant to serve with the Russian armed forces. The CM.057T boasts full metal construction with a large proportion of steel in its build and weighs a substantial but not over the top 3KG approximately, meaning your mobility will not be compromised when carrying the SVD-M.

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD-M a great base platform for a DMR build. If you are after a long-range platform and want to step away from more common DMRs, the SVD-M would be perfect!

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

Lost a handguard pin from your sneaky SMG-5? That's a shame, but fortunately, we have the solution! The CYMA Handguard locking pin is designed for the CM.041 SD6 AEG series, but may also fit other SMG-5 SD6 AEGs, though we are unable to confirm which ones. The pin is constructed from alloy and is packaged as a single pin, so if you have lost both pins make sure you order two!

If you have damaged your HOP-up unit and are looking for a replacement, CYMA are now offering their original HOP-up units as an aftermarket part. This unit is for the CM.041K and CM.041PDW AEGs, but will not fit the full sized CM.041 AEGs. The unit is constructed from polymer and comes complete other than the HOP-up rubber. The HOP unit, slider, c-clip and HOP nub are all included, so if you have lost or damaged one of these bits you are in luck!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The CYMA Ambidextrous Fire Selector Gears for CM.098 is a replacement original part set for the CM.098 series of SR-25 AEGs and includes the internal selector gears and axis for the CM.098 ambidextrous selector switches. 

A spare or replacement Magazine for the CYMA CM.700 / M40A3 Spring Powered Sniper Rifle, which is perfect for staying in the fight for longer, or spending longer on the Target Range without re-filling Magazines. If you own one of these Sniper Rifles and want carry more ammunition, then these slimline and lightweight Magazines are perfect to carry on your person; especially if you've made the effort to obtain a concealed position and don't want to give it away!

If you like to keep spare parts on hand, are building a gearbox from scratch or have had a tappet plate failure, CYMA's Tappet Plate for V2 Gearbox is ideal. This tappet plate is designed for version 2 gearboxes and is constructed from polymer. As with all internal parts, we recommend doing your research before attempting to install this tappet plate or consulting a tech who can advise. 

If you've lost an SR25 selector switch, this should be helpful! The CYMA Selector Switch Set for CM.098 SR25 AEGs is a replacement original parts set for the CM.098 SR25 series and includes the left and right side selector switches, mounting screws, springs and ball bearings for that lovely "click" between modes. 

The switches themselves are constructed from alloy and match the KAC-style selectors found on the CM.098 series, including the scallop on the right side selector and the undercut on the left side selector to allow for full auto fire. Selector switches are always going missing, but with this set handy, your CM.098 won't miss a beat even if the worst happens!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The CYMA Tactical Extended Fire Selector Lever for AK47/74 AEG is constructed from stamped steel and is a modernised design with a cutout for the AK bolt handle and a ledge that can be used to select fire modes from a firing grip.

With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger. This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. A perfect item for any Tactical AK or PMC style custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use!

Looking to give your CM.706 Sniper rifle a bit more range? The CYMA Upgrade set for CM.706 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

If you own an AK-47S underfolder AEG and you want to elevate its realism, a metal body kit is the key! The CYMA Metal Receiver for TM AK47S AEG is compatible with the CYMA CM.028S and Tokyo Marui AK-47S AEGs and will also fit others as long as they use the Tokyo Marui external design and have an underfolding stock.

The receiver is designed to match the original AK-47S "milled" receiver style, complete with weight-reducing cutouts at the front on either side, steel mock pins for some nice extra detail and engraved Cyrillic fire selector markings, an appropriate nod to realism. At the rear of the receiver, there are cutouts so an underfolding stock can be installed, and there are no conventional stock tangs on this receiver so it is not compatible with the full stock or side folding stock variants of the AK-47 AEG. If you want your AK-47S to be as its creator intended, this metal receiver kit is what you need!

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

Looking for a mid-ranged, SF-approved AEG rifle? The CM.105 is a full metal AEG with official licensing from Daniel Defense through Evike Manufacturing Group (EMG). This means it comes with perfectly engraved and absolutely authentic Daniel Defense trademarks on the magazine well, a licensed MK18 MOD1 style quad 20mm Rail System, and even more DD markings laser engraved into the side of the upper receiver. The CM.105 isn't just a looker, it also sports the same spritely rate of fire and trigger response as other AEGs in the CYMA Platinum lineup thanks to its high speed motor, and pre-installed ETU/MOSFET. This AEG looks the part, and shoots fantastically, so what are you waiting for?

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

If you are building a version 3 AK gearbox or you have an old AK AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AK AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AK doing its dirty work once again!

If you need a new nozzle for your CYMA CM.057 or Real Sword Dragonov SVD, CYMA has you covered! The Aluminium Nozzle for CYMA/Real Sword SVD/SVU is constructed from CNC machined aluminium and compatible with the CYMA CM.057 SVD/SVU AEG series and the Real Sword Dragunov SVD AEG. 

This is a replacement original part specifically designed for the Real Sword pattern SVD gearbox used in the CYMA CM.057 series and is not compatible with A&K SVDs or others. If you've built a beast of a DMR with your SVD and you want to get ahead of any potential parts failures this is a great part to have in the toolbox!

If your selector lever is looking a bit worn, or you have a fancy selector lever installed and you want to go back to the classic look, check out the M4/AR15 AEG safety selector from CYMA. A replacement original part, this fire selector should go straight onto any CYMA M4/AR15 AEG and will also fit many others! The selector set includes a fire selector blank plate for the right side of the receiver, selector cam, ball-bearing detent, and spring.

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 100 rounds so you can stay in the fight longer with your AEG.

The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves. Loaded at the top of the mag using a speed loader, the magazine is that of a mid-cap mag, which means no battle rattle when sneaking around.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

A unique and imposing Steel constructed muzzle brake for your AR-15/M4/M16 replica, or any other weapon with a 14mm CCW threaded outer barrel.

The Stainless Steel Cylinder for CM.701 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.701 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you have plans to style up your AK for 21st century combat the CYMA Aluminium M-LOK Handguard adds M-LOK accessory slots so you can mount the latest and greatest mission essentials and benefit from reduced weight! The set includes an upper handguard with "Grater" style vents and a lower handguard with M-LOK negative space attachment slots at the 3, 6, and 9 o'clock positions.

Both the upper and lower handguard are constructed from aluminium using CNC machining and are finished with matt black anodising for a smooth and flawless finish. Compatibility-wise, this handguard should fit practically an AK47/74 platform AEG or GBB rifle but will not fit AKS-74U rifles due to their shorter length handguards. Give your AK the PMC or civilian tactical look!

If you've got your eye on an AK but you have limited storage space, the AKMS is the ideal AK AEG for you. This example, the CYMA CM.048SU AEG hybridises the AKMS modernised underfolding AK with the thumbhole handguard of the AKMSU rifle to create a unique AK variant which keeps the classic AK steel and wood format but steps aside from the "issued" style for more of a PMC aesthetic.

Not content with providing the fantastic external quality CYMA's CM.04X AK series is known for, the internals of this AK replica have been upgraded with a wide range of enhancements, including a silent piston head and cylinder head, high torque motor, 7mm ball bearing bushings and an alloy adjustable HOP-up unit paired with a 6.03mm tightbore inner barrel to top it all off. If you want a unique looking AK replica with loads of steel parts, wood furniture and the performance to stay ahead in game, the CYMA CM.048SU AEG is the perfect choice!

If you have had a mishap with your CYMA CM.028 and cracked the battery tray you aren't the first and you likely won't be the last! The CYMA Charging Handle Base/Battery Tray for CM.028 AK47 AEG is designed to replace the battery tray inside TM pattern AK rifles in the event that it gets broken or damaged. Nothing ruins your AK like the charging handle sliding around loosely in the receiver so if you have a CM.028 that is worse for wear this affordable replacement part could be the key to fixing it up!

If your CM.041 SMG-5 AEG has a worn-out muzzle device perhaps it is time to switch it out for a nice new one. This replacement original part from CYMA should do the trick! The Threaded Tri-Lug Muzzle Device is designed for the CM.041 SMG-5 AEG series and is constructed from aluminium. The device mounts to the front sight assembly of the CM.041 series and provides tri-lug mounting apparatus and 14mm CCW male threads at the tip, protected with a knurled thread protector. Freshen up your old SMG-5 with a new muzzle device!

If you are gearing up to spruce up your old AK AEG this might be handy! The Front Handguard Cap with Sling Point from CYMA is an original replacement part for the CM.04x series AKM/AK74 AEG. The part is constructed from alloy and includes the rotary locking lever for the LCT/VFC/real steel style of AK handguard attachment. This part is intended for the CM.04x series but should also work with VFC and LCT AKs, though the part may need modification. This part will not fit an AKS-74U rifle, it is designed for full size AK handguards only.

If you've had a cut-off lever failure or you're the techy type who keeps parts on hand just in case, the CYMA Cut Off Lever for V2 Gearbox is ideal. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

A replacement magazine for the CM.125 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.