ASG Airsoft

An AEP battery designed for use in a range of electronic Airsoft pistols/compact SMGs. Ideal for Airsoft Electric Pistols including the ASG CZ99 and EU-Series 18C AEPs.

A Multifunction LED flashlight with 3 modes of operation, full power, low power or strobe effect. Can be mounted on most Airsoft guns with 20mm Picatinny rails. The flashlight is powered by 3x AAA batteries (not included) and comes with an integrated 20mm rail mount, a mount for the handlebars of a bike and a belt mount. 

Fitted with a tactical sliding stock for enhanced practicality in urban environments, this is a pump action, single shot spring powered shotgun. Please note that the FPS on this shot gun is over the standard 350 and will not be allowed in most CQB sites but can be used outdoor as a dmr platform

An Alloy suppressor, designed to fit both Airsoft Sniper Rifles and Standard Airsoft AEG that uses a 14mm CCW outer barrel end.

If you want to sharpen up your target shooting skills, or you want a pocket rocket for skirmishing the Dan Wesson 2.5 inch revolver would be a fine choice. This Airsoft revolver is constructed from alloy with polymer grips, giving it the hefty and authoritative feel of a full metal replica, and it feels from realistic metal cartridges with a swing-out cylinder, just like the real thing. This is the high-power version of the Dan Wesson platform, and comes with 6 high-power shells, but is also compatible with low-power shells if you want to skirmish it as a standard sidearm.

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A Tactical Blast Shield / Deflector with a quick detach interface and official B&T trademarks.

A compact red dot sight by ASG designed to be mounted onto sidearms as an RMR or AR's as a canted option when using a short dot / LPVO.

A Spare or Replacement Motor for Airsoft AEG which require a High Quality Motor as part of an Upgrade Build or Repair. 

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

Compact tactical LED light and laser module that will fit onto any 20mm rail system. Ideal for compact Airsoft weapons including a range of Gas to CO2 pistols and MP9s. the module has an easy to use tail toggle switch to go from light only to laser only or have light and laser on at the same time or power off.

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

An adaptor which converts the 18mm thread on the Airsoft Scorpion Evo to a 14mm Counter Clockwise (CCW) Thread

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines. 

Instantly fill your revolver with a new set of BB carry shells! Suitable for both 4" and 8" Dan Wesson revolvers. This method is much quicker than replacing each shell individually, and makes reloading your Airsoft revolver a dream.

A gas grenade (AKA Moscart) for Airsoft punches out 90 rounds per shot. A new and unique design capable of firing all 90 rounds with sheer force. Each shell can be loaded in under 2 minutes with no use of a speed loader. Excellent for CQB arenas and close quarter battles outdoors.

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

A robust and adjustable bi-pod designed for use with Airsoft Sniper Rifles, supplied with a 20mm RIS rail adaptor allowing the bi-pod to be used with the widest possible range of sniper rifles.

If you're looking for the very smallest of LiPo batteries, you've found it. Measuring 4x1.3x2cm, this battery can be used to power the FCU in the V12 engine, in addition to other HPA systems with a mini-JST type connector.

The battery has a voltage of 7.4v, a capacity of 250mAh and a discharge rate of 20C and features a cable length of roughly 10.5cm

A gorgeous and faithful CO2 powered replica of the Schofield Revolver, which in the real world was a Smith & Wesson Model 3 adapted for use in the US Military by converting it to fire a shorter .45 cartridge than the standard of the time.

The ASG Dot Sight is a red/green dot sight designed to allow you to engage the enemy more quickly and effectively than with standard iron sights. This works by projecting a red or green dot on the internal lens of the sight, meaning all you have to do to make the hit is line the dot up with the target and pull the trigger! 

If you find the red dot is off when you take your first shot, no need to worry, the sight can be zeroed using the dials on the top and sides for perfect precision. Compatible with any 20mm Picatinny rail thanks to its included one-piece mount, the ASG Dot Sight is a cost-effective piece of kit with unique styling!

This is an official aftermarket Airsoft Hop-up Unit for the ASG Scorpion Evo, made by none other than ASG themselves! This awesome unit is constructed from a single piece of CNC 'Aerospace' Aluminium, and states it will yield a 20% increase in range and accuracy. It is also said to be tailored to Flat Hop and R-Hop setups, if you have already made this modification. If you haven't done this modification, don't worry, it will still give you performance benefits.

A Gas powered non-blowback CO2 Airsoft 6mm BB revolver created by ASG with their brand new design, transforming the Dan Wesson range of revolvers from 'Party Piece' to 'Skirmishable Weapon'.

A spare magazine for the ASG Steyr SSG 69 P2 Spring Powered Airsoft 6mm Sniper Rifle.