All Two-Tone Airsoft Guns

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

A 6mm BB Airsoft Electric non-blowback Pistol, based on the iconic original 1911 pistol perfect for if you are wanting to get into Airsoft skirmishing. The CM.123 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent. 

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into battle right away.

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

A full metal spring powered pump action Airsoft 6mm shotgun that is tri-barrelled and comes with a sawn-off style pistol grip as standard.

As seen in the immensely popular Battlefield game series, among many more, this is often the go-to rifle for aspiring snipers, with this new upgraded version shooting at a beastly 500FPS, straight out of the box.

Based on the M24 platform, this is spring powered bolt action replica with a full metal build with a lengthy adjustable buttstock. This is a great, budget-friendly Airsoft sniper for those of you looking to start your sniper loadout or if find yourself playing more outdoor skirmishes.

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

An Airsoft Electric Pistol which features a MOSFET for a rapid rate of fire and consistent performance.

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA Platinium line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm ball bearing bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a stainless steel cylinder and a polycarbonate piston with a full steel tooth rack. Tying this selection of high end internals together is the CYMA Platinum MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

Constructed from alloy, this is an Airsoft AEG replica of the OTs-03 SVU ‘Dragunov’ bullpup sniper rifle, the successor to the legendary 'Dragunov' SVD, first seen used by the Russian Federation in the First Chechen War.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

A perfect starter pistol for those starting their Airsoft journey, or a budget friendly sidearm for those times your primary is empty and you find yourself in a pinch!

This electric Airsoft 6mm BB gun, is designed to be easy to use, and even features a MOSFET and adjustable gear Hop-up.

The CM.125S pistol is constructed with an alloy mock slide and polymer frame; Lightweight and efficient at both semi and full auto, this pistol has everything you need to get you into Airsoft skirmishing.

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate pencil barrel and 2 position XM177 style stock, the CM.009D M653 is the old school tacticool carbine from a time before the M4!

The CM.009C MOSFET Edition is an M16 platform Airsoft Electric Gun replica of the A1 variant, which saw heavy use in Vietnam. Much like the CYMA Platinum series, this AEG features a MOSFET and Electronic Unit that makes a serious improvement on trigger response, which is really the only thing you could complain about on the previous model. It also features a Quick Change Spring for quicker and easier Main Spring changes; very helpful if you play at multiple sites with different power limits. If you're looking for either a period accurate Airsoft Gun or you're looking for your first rifle, this is a seriously strong contender.

If you are searching for the best CQB platform out there, the CYMA Platinum SLR Airsoft Works AKS-74U AEG; Tracer HOP-up is definitely worth considering. Absolutely brimming with upgraded parts including a MOSFET, 13:1 CNC steel gears, CNC aluminium piston and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, this lil AK shoots like a laser and its built-in tracer HOP-up gives it an instinct aiming and psychological warfare advantage when exchanging fire at kissing distance.

Externally, the SLR AKS-74U definitely meets the high standards CYMA AKs are known for, with full metal construction including a steel receiver and top cover, CNC aluminium "Solo Krink" handguard, AK Billet stock and Synergy Mini-Comp with full licencing from SLR Rifleworks. The modern furniture enhances handling considerably and also allows modern accessories to be easily mounted, from suppressors to red dot sights, vertical grips and tactical flashlights.

Whether CQB is your poison or you have an aggressive playstyle and like to get right in the enemies' face, the CYMA Platinum SLR AKS-74U will be an asset to your arsenal. Built like a tank with almost as much firepower, don't let its size fool you, this compact AK comes with full-size performance!

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!

If you are in the market for something with stealthy looks that is also remarkably quiet to shoot, check out the CM.070 M4SD from CYMA. This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. Coupled with the included suppressor, this AEG is practically as quiet as they come out of the box!

If you have a thing for modernised AKs, you'll love this! The CYMA Platinum SLR Airsoft Works AK-105 AEG is absolutely packed with pre-upgraded parts and is officially licenced by SLR Rifleworks with detailed replicas of SLR parts across the design. Boasting the incredible CYMA Platinum E-EDITION High Speed internals, this AK-105 is absolutely devasting in-game and to make matters all the sweeter is equipped with an internal tracer unit mounted to the HOP-up and powered by the AEG's battery.

This means you can light the enemy up with tracer BBs without adding any extra length or weight to your gun, adding in a rare innovation usually only found on the aftermarket and requiring a certain amount of expertise to wire in. An impressive feature made even better in combination with the AK-105's other upgraded parts and flawless build quality. The SLR AK-105 boasts full metal construction with a large proportion of steel in the build, a 6.03mm tightbore inner barrel, high torque Neodymium magnet motor and much, much more!

Whether this is your first AK AEG or you are adding to a collection of AKs, the CYMA SLR AK-105 is a solid choice with great performance and the party trick of lighting up tracer BBs with no need for an aftermarket tracer unit!

A stylish and well-constructed electric-powered Bullpup that features a 650mm Inner Barrel, 14mm CCW Thread, M-LOK Handguard, Dovetail Rail, Rotary HOP Unit and Suppressor in a deadly and compact package, and comes included with a Battery & Charger.

If you ever wanted to light the enemy up with tracer BBs but don't like the looks of a suppressor, the CYMA Platinum SLR Airsoft Works AK-74 AEG is your dream come true! This pre-upgraded AK AEG is officially licenced by SLR Rifleworks and boasts a full metal build with plenty of steel, CYMA's impressive E-EDITION High Speed internals and a tracer unit integrated into the HOP-up unit, meaning you don't need to add length or weight with a tracer unit to get an instinct aiming advantage in CQB or low light skirmishes.

With a pre-installed MOSFET, 13:1 high speed CNC steel gears, a CNC aluminium piston head and cylinder head, a high torque Neodymium magnet motor and a 6.03mm tightbore inner barrel, there is practically nothing left to upgrade on this beast! A shame for those who like to get their hands dirty, but for the rest of us, fantastic news.

Whether you seek a modernised AK to add to your arsenal or you are smitten by the sound of a built-in tracer unit, the CYMA Platinum SLR Airsoft Works AK-74 AEG will make your day with its thunderous rate of fire, superb long range accuracy and flawless build quality.

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

The CYMA CM.008 M4 S-System is based on the old-school TM S-System AEG, complete with an SIR-style quad rail for mounting accessories and the hefty weight and realistic feel of full metal construction. The SIR rail system has the benefit of offering an uninterrupted upper rail for improved strength over comparable RIS systems and more space to mount larger optics such as riflescopes and red dot sight magnifier combos. 

While the SIR rail system is a bit dated compared to M-LOK and KeyMod, the S-System design will be warmly remembered by some of us old hats, offering plenty of advantages compared with a standard RIS/RAS quad rail and is a great design for someone looking for the simplicity of a quad rail in a more unique and eye-catching design. On the inside, the CM.008 follows suit with CYMA's other full metal M4 platforms, boasting a reinforced v2 gearbox, high torque motor, alloy rotary HOP-up unit and 6.03mm tightbore inner barrel to top it off. If you want a solid M4 platform with rare and interesting externals and a full compliment of upgraded internals, the CM.008 should be high up on your list!