All Two-Tone Airsoft Guns

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

If you love a bit of chrome or remember the old sitcom Sledge Hammer! (1986), the Umarex Smith & Wesson 629 'Trust Me' CO2 Airsoft Revolver will suit you perfectly! Based on the on-screen prop wielded by Inspector Sledge Hammer in the 1986 sitcom of the same name, the 629 Trust Me revolver is a highly detailed and realistic replica with a full metal build, licensed Smith & Wesson trademarks and custom "Trust Me" grips as a nod to the TV show.

When it comes to performance, the 629 Trust Me is a bit on the spicy side to say the least, hitting out at 500 FPS +/- 10% using 0.2g BBs. You can tell the marshalls at your local site "Trust me, I know what I'm doing" and they still probably won't let you use this potent platform in game! Regardless, the 629 Trust Me makes one heck of a plinker for target shooting, offering a realistic revolver experience thanks to its working double action/single action trigger, rotating cylinder, functional hammer and realistically finished .44 Magnum style shells.

Whether you're delicately placing it on a satin pillow for display or using it to lay down the law, the Umarex Smith & Wesson 629 'Trust Me' CO2 Airsoft Revolver will give you the thrill only a revolver can!

Based off the standard M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms with high levels of detail, finish, with a top quality wobble free design. If you're looking for a high quality full metal rifle for a beginner weapon you're going to be hard pressed to find anything else in this price range of this quality.

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market. 

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3A1 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3A1 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3A1 is patterned after the original M3A1 Grease Gun, the second Grease Gun variant which saw the ratchet style charging handle deleted. In Airsoft terms, this means the Snow Wolf M3A1 is realistically limited to full automatic only, with the dust cover functioning as a safety catch, just like the real thing. The Snow Wolf M3A1 has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals. 

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic. 

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

If you’ve seen our videos from IWA and the G&G World Cup you must be lusting after this thing as much as we are! Introducing the G&G Armament ESG-B10 Gas Shotgun, the spiritual successor to the ill-fated FLAK-12 design, a semi-automatic gas-powered shotgun offering the choice between a punishing 5 BBs per trigger pull and a positively evil 10 BBs!

The ESG-B10 is constructed with a CNC Aluminium upper receiver and a superb quality high-density polymer lower, as G&G is known for, and takes standard M4/AR-15 AEG magazines, meaning spares are ever available. Bristling with M-LOK slots on each side and the bottom with a generously long 20mm Picatinny top rail, the ESG-B10 is ready to be kitted out with accessories despite the unique nature of its design.

If you play CQB and need something to take on those drum-mag rocking HPA tri-shot speed-softers, the G&G ESG-B10 will give them a run for their money!

If you are looking for a CQB primary with an out-of-the-box custom look the ARCTURUS AK74U Tactical Sub Carbine AEG would be a fine choice and is a welcome breath of fresh air amidst the noxious cloud of standard AKS-74U AEG rifles on skirmish fields today. This AK74U rifle is around the same length as a standard AKS-74U but uses an RPK-style reinforced AK receiver and trunnion block setup, giving you something you simply cannot build yourself starting with an AKS-74U.

On the inside, this AK is outfitted similarly to other ARCTURUS offerings, with a well built gearbox boasting a range of reinforced low friction components, a 6.01mm steel tightbore inner barrel and a microswitch trigger to provide a snappy response and replace the conventional trigger contacts which are a known weakness of AEG gearboxes. With majority steel construction, plenty of accessory options and some choice modern ergonomic enhancements this AK is hard to beat when things get up close and personal!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

The Arcturus AK-12 is a replica of the legendary AK-12, an updated revisit of the AK Platform in an attempt to bring it into the modern day. This replica is built to a stunning standard using majoritively Steel for the externals, with handy features like a Quick Change Spring and Microswitch Trigger.

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

If you're looking to lay down some serious firepower, this hefty beast has got you covered!

Realistically constructed from alloy, real wood and polymer, this electronically powered 6mm BB Airsoft replica is an incredibly authentic replica of the instantly recognisable WW2 era MG42, the infamous “Hitler’s Buzzsaw”.

From one of the hottest new brands on the scene, VORSK, comes a 4.3 Hi-Capa which offers a realistic Gas Blowback action as well as an Integrated Red Dot Sight, Threaded Outer Barrel, Low Light Ironsights and much more. This is the perfect sidearm for those who love the Hi-Capa platform but want a more compact backup.

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

If you like a sidearm that looks simple but grabs attention when you pull the trigger, the KJ Works M1911A1 GBB Pistol; CO2 Version will do exactly that! Boasting full metal construction and a Tokyo Marui-based internal build, the highlight of this 1911 platform is its incredible recoil, booming muzzle report and very impressive rapid-fire performance. Most green gas-powered 1911s suffer from a small gas reservoir restricting their consistency under rapid fire but we are happy to report that the KJ Works M1911A1 is exceptional in this regard.

Based on the real steel M1911A1, the 1911 variant issued during WW2, the Korean War and the Vietnam War, this is the variant to go for if you're running a retro primary. If you prefer a sidearm which is simple and effective with a side of old-school cool, the KJ Works M1911A1 GBB Pistol; CO2 Version is exactly that!

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

Those of you looking for a classic AK platform with more than its fair share of real wood and steel parts; you may have just found your new primary! The Jing Gong JG1011 AKS-74U boasts full metal construction and beautiful real wood handguards that both look and feel great.

Separating the JG model from more conventional AKS-74U AEGs, the JG1011 features an electric blowback system which means that with every shot the charging handle moves back and forth with a "clank clank clank", adding to the rifle's realism and making the firing experience all the more special. Unlike other EBB Airsoft guns, this AKS-74U takes standard AK AEG platform magazines, meaning spares are always available and affordable, so no worries about finding enough spare mags to get you through a skirmish!

If you are getting bored of standard AEGs and want something a bit more fun to shoot but you still want the inherent reliability and affordability of an electricity-powered Airsoft gun, the JG1011 would be a fantastic choice!

Optimised for speed an manoeuvrability, this rifle excels in CQB and quick combat scenarios. The ARCTURUS M4/AR-15 Lite CQB sports a 10.5-inch slimline M-LOK handguard, that hides a beastly 6.01mm tightbore inner barrel for agile movement and handling, as well as superior precision shooting.

The rifle benefits from an aluminium handguard and polymer body and stock to keep the weight light and you light on your feet in the heat of battle. Featuring a monolithic top rail, M-LOK rail system and ambidextrous controls, sling plate and charging handle. It also boasts sleek stylings, with a modern 'Billet' style receiver and slimline low-profile stock; This AEG has everything you'd hope for in a modern AR.

This Airsoft Electric Gun is a Bullpup Assault Rifle with an Alloy 20mm Rail System at the front, as well as Ambidextrous Controls, Threaded Outer Barrel and a MOSFET to make this a highly adaptable platform.

A replica of the G3 rifle with an RIS handguard to give the old gun a fresh feel and bring it into the modern era. The Picatinny handguard allows mounting of all manner of accessories, if you ask me this would make a great basis for a DMR build.