All Spring Internals

A Steel trigger sear set for the L96 series of Airsoft Sniper Rifles / Bolt action Rifles. Once fitted into your Airsoft Gun this steel sear set will provide you with a tough and reliable bolt retain so you can rack your gun in confidence and spend less time worrying about parts breaking and more time getting your head in the game!

Fine-tune your SSG10 with this Weight-Adjustable Piston from Novritsch, designed to enhance the performance of your SSG10 sniper rifle. Crafted with high-quality materials, this piston is the ultimate upgrade for tuning your SSG10 to make it shoot exceptionally with your different BB weights, barrel lengths, and the other interchangeable elements of your rifle.

If you've got feeding issues with your TAC-41 or you broke the feed ramp, the Silverback Airsoft Feeding Ramp Gen 2 for TAC-41 Sniper Rifle will get you up and running again. This is the Gen 2 feed ramp, boasting an improved design which prevents breakages when the magazine is loaded incorrectly. Compatibility wise, this feed ramp is only for the Silverback Airsoft TAC-41 sniper rifle series but should fit all variants. 

If your S&T Lee Enfield No.1 MK III has trigger issues, this will sort it out! The S&T SMLE No.1 MK III Trigger Group is a replacement original parts set including a complete, pre-built trigger group. This means installation is relatively easy, saving you the hassle of putting the trigger group together yourself. Compatibility-wise, this trigger group is only for the S&T Lee Enfield SMLE No.1 MK III rifle and won't fit the Ares No.4 MK.1 or MK.1*. 

Can be fitted inside other rifles including AEG gearboxes. The sorbo pad works by absorbing impact from your piston head, please note you should expect an FPS loss so you may have to improve the air seal or fit a slightly larger spring to regain your desired FPS.

The Stainless Steel Cylinder for CM.706 series comes as a set with a pre-installed brass cylinder head and is a replacement original part manufactured by CYMA themselves. This can be a handy part to have if you use your CM.706 at different sites with different FPS limits, as you can make a second cylinder and swap them out as and when you need (though this does require disassembly). The set includes both the cylinder and the cylinder head.

If you're planning to upgrade your CYMA CM.700 or CM.708 sniper rifle, install this first! The CYMA Stainless Steel Cylinder for CM.700/708 Sniper Rifle is pre-assembled with a brass cylinder head, rubber O-ring and stainless steel cylinder with a welded bolt handle mount for maximum strength. The inner surface has been polished to reduce friction, improve efficiency and prevent excessive wear and tear when using strong springs.

Compatibility-wise, this part set is only for the CYMA CM.700 and CM.708 series of spring-powered sniper rifles and is unlikely to work with other brands and models. As always, we only recommend upgrade parts like this for those with experience or the patience and willingness to learn. If you plan to install a super strong spring into your CM.700 or CM.708, this set should give it the strength it needs to last a lifetime!

Looking to give your Snow Wolf Kar98k rifle a bit more range and power? This Airsoft Pro Upgrade Set will give you what you seek, with the added benefit of including steel and aluminium-reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from steel and aluminium, plus a seriously high-power spring which gives approximately 460 FPS when installed!

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

Do you want to push your Novritsch SSG10 to the next level? The Novritsch SSG10 Cylinder Head Gen2 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and powerful. The thread has an optimal length to maximise the cylinder volume and the shape of the cylinder head has been slightly tweaked for a better air seal. 

The Novritsch SSG10 Spring Guide is the perfect spare part for your SSG10 sniper rifle. It is compatible with all versions of this platform (A1, A2, A3). Its one-piece machined steel construction means that you will never have to worry about this spring guide breaking or unscrewing. The spring guide has the 13mm diameter spring standard, which means your SSG10 will have the maximum spring return efficiency, perfect for hitting those shots consistently!

Whether your SSG10 is out of action and in need of repair, or you fancy a spare part for peace of mind, the Novritsch SSG10 Spring Guide is the perfect piece to pick up for you sneaky snipers!

A CNC machined Aluminium Hop Arm / Pressure Plate for the Modify MOD24 Bolt Action Sniper Rifle.

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

The Maple Leaf MR HOP-up Bucking is widely regarded as the best HOP-up bucking offered by Maple Leaf, offering a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect and an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design intended to prioritise range over grouping size and the ideal pairing for the Maple Leaf I-Key. This bucking is compatible with Tokyo Marui-based GBB and VSR platforms, WE and VFC GBBRs and as always, we only recommend upgrade parts for those who are confident working on their platform's internals. If you want to extend your range out to the borderline implausible, the Maple Leaf MR.HOP HOP-up Bucking will do the trick!

A high quality replacement Hop up rubber, made to 50 degrees of hardness, and designed for VSRs, as well as KJW and WE Airsoft designs.

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

If you need a bit more range from your Novritsch SSG series sniper rifle, this spring will do it! The SSG 13mm Main Spring is compatible with any Novritsch sniper rifle with SSG in the name, along with the TAC338 platform. 

As impressive as the range of Novritsch sniper rifles already is, this spring should give you an FPS increase so you can engage targets at longer distances, though it will make your rifle more difficult to cock. If you're the type of sniper who prioritises effective range over mobility and speed, the SSG 13mm Main Spring will give you the range you need!

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

If you're planning on doing up your WELL MB02/03 VSR-10 clone, this set will sort your piston group! The WELL Piston Upgrade Set for MB02/03 Sniper Rifle Series includes a CNC aluminium piston and piston head, CNC aluminium ball bearing spring guide and a 500FPS mainspring. Installing this set should get you right to the upper limits of permitted sniper rifle velocity, extending range considerably compared to the stock MB02/03 spring. If you're working on a bargain sniper rifle build with a WELL VSR-10 clone base gun, this set would be perfect!