All Novritsch

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

If you're getting geared up to run HPA, the Novritsch HPA Regulator & Line; US Spec should be useful! This set includes a regulator and air line with the US Spec fitting, ideal for use with Novritsch HPA adapters or other US Spec adapters. The set does not include a bottle, so make sure you grab one if you don't already have one!

The Novritsch HPA Regulator & Line; US Spec boasts a two-piece design, allowing easy access for maintenance and includes only two O-rings inside to minimise potential failure points, increasing long-term reliability. The integral tournament lock allows you to lock off your regulator to keep the pressure constant and within site limits using a standard zip tie, keeping site marshalls happy. If this is your first foray into HPA, we recommend reading the "Special Instructions" section of the full product description before ordering. 

This line and reg set is compatible with both standard and SLP (super low pressure) HPA tanks but only works with US Spec adapters and bottles, not EU spec. If you're about to grab yourself a Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa or EU-Series, this is the line and reg you need!

This Novritsch Modular Chest Rig Adapter Plate is an adapter plate that allows you to have more velcro surface on the front part of your chest rig or plate carrier if you are running heavier magazines. This adapter plate allows for more modularity and a distinct tactical look. Keep your heavy magazines secure and safe!

To install this chest rig adapter you must first, remove the side buckles from the front of your chest rig, then remove the back padding of the rig. After that, attach the Novritsch Modular Chest Rig Adapter Plate to the chest rig, then attach the rig to the carrier using the buckles on the top of the rig.

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

If you need a way to carry more kit in comfort, look no further than the Novritsch MOLLE Battle Belt 3.0! Styled after modern MOLLE battle belts, the Battle Belt 3.0 boasts the unique Novritsch laser-cut MOLLE style, allowing you to mount MOLLE pouches wherever you need them and match the styling of the ASPC and other Novritsch tactical gear perfectly. 

The belt itself is padded for comfort with heavy loads and can be paired with the Novritsch Harness 3.0 to create a modern webbing belt solution, similar to old-school PLCE in feel but with all the advantages of modern MOLLE interfaces. Available in 3 different sizes and 7 colour options, the Novritsch MOLLE Battle Belt 3.0 is a fine solution regardless of your intended use or loadout style!

If you need a way to carry more kit in comfort, look no further than the Novritsch MOLLE Battle Belt 3.0! Styled after modern MOLLE battle belts, the Battle Belt 3.0 boasts the unique Novritsch laser-cut MOLLE style, allowing you to mount MOLLE pouches wherever you need them and match the styling of the ASPC and other Novritsch tactical gear perfectly. 

The belt itself is padded for comfort with heavy loads and can be paired with the Novritsch Harness 3.0 to create a modern webbing belt solution, similar to old-school PLCE in feel but with all the advantages of modern MOLLE interfaces. Available in 3 different sizes and 7 colour options, the Novritsch MOLLE Battle Belt 3.0 is a fine solution regardless of your intended use or loadout style!

Do you want to push your Novritsch SSG10 to the next level? The Novritsch SSG10 Cylinder Head Gen2 will help you achieve this dream. This machined stainless steel cylinder head has been optimised to make it more consistent and powerful. The thread has an optimal length to maximise the cylinder volume and the shape of the cylinder head has been slightly tweaked for a better air seal. 

The Novritsch SSG10 Spring Guide is the perfect spare part for your SSG10 sniper rifle. It is compatible with all versions of this platform (A1, A2, A3). Its one-piece machined steel construction means that you will never have to worry about this spring guide breaking or unscrewing. The spring guide has the 13mm diameter spring standard, which means your SSG10 will have the maximum spring return efficiency, perfect for hitting those shots consistently!

Whether your SSG10 is out of action and in need of repair, or you fancy a spare part for peace of mind, the Novritsch SSG10 Spring Guide is the perfect piece to pick up for you sneaky snipers!

The Novritsch SSG10 A2 Stock will completely transform your SSG10 or VSR 10 sniper rifle. The stock and chassis have plentiful features that will elevate your gameplay both in terms of ergonomics and aesthetics. It fits the SSG10 A1 receiver without and adjustments need to be made. It also fits other VSR-10 platforms but requires you to remove the hop-up block plate from your VSR-10 rifle first before installing the stock.

You will need to manually install this part, only those who are absolutely confident in their abilities should attempt to install this stock. 

Uplift your sniper rifle and give it a realistic and comfortable feel with this SSG10 A2 Stock, being a sneaky sniper has never been more appealing!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

If you've been searching for the perfect MOLLE belt, offering maximum agility with plenty of load-bearing capacity, the Novritsch Minimal MOLLE Belt is definitely worth a look! Designed to be worn alone, or paired with the Novritsch Velcro Inner Belt 2.0, the Minimal MOLLE Belt offers 3 removable MOLLE panels mounted on a standard rigger style belt with a buckle based on the legendary Cobra buckle, a strong design found in numerous forms on both real steel and Airsoft tactical belts.

The Minimal MOLLE Belt can be adjusted to fit waist sizes 35-40-inches approximately and the MOLLE webbing modules can easily be removed via velcro if not in use, allowing you to make the belt even more minimal for increased agility and flexibility on the battlefield. MOLLE allows you to mount all manner of MOLLE pouches and holsters. The benefit of removable MOLLE sections is that if your holster doesn't have a MOLLE adapter, you can remove a MOLLE section and mount it directly to the belt itself! If you've ever wanted the perfect balance between agility and load-bearing capacity, the Novritsch Minimal MOLLE Belt is exactly that!

Become one with your surroundings and blend in like nobody else for an unparalleled Airsoft sniping experience. Novritsch brings their Airsoft sniping expertise to the world of camouflage to take your gameplay to the next level. The 3D Ghillie Boonie Hat features irregular 3D leaf patterns, which is incredibly realistic so you can go unnoticed on the field.

The Boonie is constructed from strong fabric mesh, which is tear-resistant as well as being breathable, keeping you cool during those hot summer skirmishes. Adjusted with a shock cord, the boonie is one size fits all with the leaves themselves featuring irregular shapes and patterns as they would appear in nature so as to fool the most eagle-eyed opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system, or the boonies included elastic bands.

If you are looking for flashy pistol mag pouches with modern styling, Novritsch has what you need! The MOLLE Open Pistol Magazine Pouch Gen2 is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier! This pouch is size adjustable and should fit all but the biggest pistol mags out there.

The pouch mounts to MOLLE webbing and also has laser cut MOLLE loops on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific pistol magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you reloading faster than ever before!

If you are looking for flashy pistol mag pouches with modern styling, Novritsch has what you need! The MOLLE Open Pistol Magazine Pouch Gen2 is constructed with a fabric outer and a polymer inner retainer, meaning reinserting your mags has never been easier! This pouch is size adjustable and should fit all but the biggest pistol mags out there.

The pouch mounts to MOLLE webbing and also has laser cut MOLLE loops on the front, meaning you can stack these pouches on top of each other if you need extra load-bearing capacity. Size adjustments are applied via the polymer toggle on the rear of the pouch, allowing you to fit the pouch perfectly to your specific pistol magazine and have the exact amount of retention you need to get the job done. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches will give your rig a modern look and have you reloading faster than ever before!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you are looking for the slickest and quickest of Airsoft-optimised plate carriers you just found it! The Novritsch ASPC 1.0 is designed by Novritsch's textile team with the assistance of ex-military professionals and the result is a unique looking and uniquely functional plate carrier with all the most modern features.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On each shoulder and on the cummerbund we are treated to magnetic quick-release buckles which make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

The carrier is constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and is supplied with Novritsch vented plates, providing airflow which simply cannot be rivalled by replicas of real steel plate carriers and keeping you cool and comfortable no matter how hot it gets. If you want to look hot but stay cool in game, this is how you do it!

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms.