All External Airsoft Parts & Attachments

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

A Pair of Modular 20mm RIS accessory rails designed to be fitted on to AR36 Style Handguards allowing the attachment of aftermarket parts and accessories. 

This outer barrel is a replacement original part for the Army Armament R601 JW3 GBB pistol but should also be compatible with other Army Armament Hi-capas and 1911 GBB pistols. The barrel is constructed from alloy and comes with 12mm CW female threads at the tip, leaving options open for adding a tracer unit or suppressor using a 14mm CCW male thread adapter (available separately). The barrel may also be suitable for other Hi-capa and 1911 pistols based on the original TM design but may require modifications to be made for smooth function.

The barrel is finished in bronze and has authentic looking mock locking lugs across its upper surface, with "9x19" marked on the chamber area in recessed lettering. The barrel has a standard flared profile which tapers towards the chamber, matching the more common real steel Hi-capa barrels perfectly.

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

If you have a Double Eagle M90x with the Honey Badger PDW stock and you fancy a change, until now you have been SOL! Introducing the Buffer Tube for Double Eagle M4/AR-15, a replacement original part from the M904 AEG. This set includes an alloy buffer tube and castle nut, a steel bolt and spacer and a polymer receiver stock adapter which can be used to convert an M90x series with the Honey Badger stock to a standard AR buffer tube.

Whether you have damaged the stock mounting apparatus on your Double Eagle M90x polymer receiver or you are bored of the Honey Badger look and you want to change things up, this set is the perfect thing!

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

Take your sniper to the next level and reduce those all-important decibels with a silencer adaptor. This aluminium constructed thread adaptor allows you to install muzzle devices such as suppressors and tracer units. Simply remove the barrel cap and replace it with this adaptor for a seamless transition to the muzzle device of your choice.

The adaptor provides a 14mm CCW thread to customise your replica, and is compatible with the MB-03 spring-powered Airsoft sniper rifles.

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel. 

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you have plans to style up your M4/AR-15, a new handguard can change its looks entirely while adding a lot of extra functionality. The HASTA SLP Free Float M-LOK handguard is constructed from CNC machined aluminium, boasting ultra-low weight, QD sling sockets and plenty of M-LOK slots with integrated 20mm rail sections just where you need them.

Available in 4 different lengths to suit any build objective, the HASTA SLP handguard has the sporty modern looks to keep your AR at the cutting edge. Angled swept-back ports punctuate the M-LOK slots, serving both as weight reduction and to provide a dynamic look, and at the base of the handguard, we are treated to realistic markings.

If you need your AR to be the slickest and quickest, the HASTA SLP Free Float M-LOK Handguard for M4/AR-15 will be an asset to your build!

If you've lost the butt plate from your Delta Armory or Krytac battery stock, this is your lucky day! This Butt Plate is a replacement original part from Delta Armory, compatible with both the Delta Armory and Krytac Battery stocks. The butt plate has texture and a Delta Armory logo on its contact surface, along with textured tabs on each side which lock it into the stock itself and allow easy access to the battery compartment.

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

If you want to give your primary a sneaky look, the Specna Arms Covert Tactical PRO Silencer is the way to go! This Airsoft suppressor is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This is the 40mm diameter version, providing a more proportional look when mounted rifles and SMGs with their larger overall form.

This is the PRO version of the Specna Arms Covert Tactical Silencer, meaning it has aluminium internal baffles with o-rings and springs instead of the usual foam filling. This version is the "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text. If you have a high rate of fire setup or you are a fan of the legendary Avenger cannon, Vulcan cannon or any other BRRRRRT machine, this suppressor is for you!

A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.

A pair of scope mounts designed to raise your optic for a more comfortable weapon setup.

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

A set of rail panels which can be cut to size to give you a better grip on your 20mm RIS / RAS Rail set.

If you're worried about losing your RMR red dot to a BB impact, cast your concern aside and add this to your setup! The JJ Airsoft Kill Flash Lens Protector for RMR Red Dot Sights is designed to mount to the front of an RMR or RMR clone micro red dot sight and protect the lens from BB impacts along with reducing glare so your shiny objective lens doesn't give you away. 

If you want to protect your lens while keeping your setup looking realistic, this is the way to go!