All External Airsoft Parts & Attachments

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from CowCow are designed to replace your old, worn-out grip screws so you can continue to swap and change to your heart's content!

A replacement set of grip plates designed specifically for KJW M9 Gas Blowback Pistols, which allows you to customise the appearance of your M9, making it stand out from the crowd.

If you need a replacement bolt handle for your CM.707 Sniper rifle you are in luck! This CYMA part is an original replacement, intended for the refurbishment of an old and worn out sniper rifle. The handle is constructed from steel and does not include the polymer end piece so you will need the original end piece from your rifle to complete it.

A 20mm Railed Mount for EU Series Airsoft Pistols, simply sliding onto the Flashlight/Laser Slot on the underside of the frame, and providing you with both a 20mm Rail for a Sight or Scope, as well as an underside 20mm Rail for a Torch, Laser or other single slot accessory. Unlike other Frame Mounts, this one is push fit with a spring-loaded release button for easy installation and removal.

If you want to take pure advantage of the superb accuracy and range of the Novritsch SSX23 NBB pistol, the Novritsch SSX23 Red Dot Plate V2 is what you need! This red dot mount plate is constructed from CNC machined aluminium and designed to mount directly to the SSX23 slide, providing mounting holes for the Novritsch Red Dot Micro V2 and other red dot sights which use the Leupold DeltaPoint Pro® mounting standard/footprint. 

Adding a red dot sight can make all the difference, especially when installed on a long range beast like the SSX23. If you want to acquire your targets faster, aim intuitively in low-light conditions and make your SSX23 look amazing, the Novritsch SSX23 Red Dot Plate V2 gets you half way there!

A suppressor designed to fit onto Airsoft 6mm BB Gun in order to dampen the sound leaving the barrel.

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

A very unique and eye-catching upper rail and front handguard modification for SMG-5 Airsoft electric guns, allowing you to convert your SMG-5 AEG into an intimidating CQB monster.

If you're rocking the remarkable Novritsch SSE18 AEP and want to stretch its legs, the SSE18 Minimalist Carbine Kit is a great way to do it. Constructed with a CNC aluminium chassis and a high-density polymer stock, this carbine kit transforms the SSE18 into a nifty little SMG and allows you to take full advantage of its impressive range. 

Like the Minimalist Carbine Kit for SSP18 GBB, this carbine kit is equipped with a 20mm Picatinny rail up top, ready for a red dot sight or scope, and a magnetic locking folding stock at the rear. Also present is a lug for the Novritsch Univeral Holster system machined into the left side. Given the low weight of the completed setup, we think the SSE18 in the Minimalist Carbine kit is a superb sidearm for a sniper; small enough that it won't slow you down if carried on a belt with full auto on tap to keep the enemy at pay if you get spotted!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

Do you find that there are not enough attachment slots on your current MCX handguard? If so then the Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is for you! It features a modernised design with a 20mm Picatinny rail on top and M-LOK sections at 3, 6 and 9 o'clock, plus additional offset M-LOK slots at the lower diagonals and in line with the gas block cutout. This is an improvement upon the original MCX handguard as the extra M-LOK slots allow for more attachment space and the added angles mean more customisation is available when it comes to style and ergonomics.

This handguard and barrel are constructed from CNC machined aluminium, which makes them not only very strong but also ensures that they are flawless in their design. The Airsoft Artisan 10" Spear Handguard Set for SigAir MCX Virtus is the best way to give your MCX an external facelift and keep it up to date with the latest MCX variant, the MCX-SPEAR.

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

If you are having trouble reloading your ARCTURUS AK, this should sort it out! The Magwell Spacer for AK-47/74 AEG is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well and prevent over-insertion. Unfortunately, this part only works with ARCTURUS AK AEGs and won't fit any other brand as far as we are aware. 

If your ARCTURUS AK uses the MOE-style pistol grip and your base plate has gone walkies, here is the perfect replacement. The Pistol Grip Base Plate for AK-47/74 AEG is only compatible with ARCTURUS AKs which use the MOE-style pistol grip, as seen in the following example: ARCTURUS AK TWS AEG. The base plate is constructed from high density polymer, just like the original.

The Battleaxe Pistol Grip gunfighter mod.2 for M4/AR-15 AEGs has a cutting-edge grip design with a more vertical angle than other conventional grips, designed specifically for increased comfort in modern shooting stances. This grip also includes a motor baseplate constructed from polymer.

The unique and modern shape of the grip improves comfort and enhances shooting accuracy. As a result, shooters can focus on their target, minimizing hand and arm fatigue whilst taking part in extended skirmish operations. This pistol grip is perfect for those seeking the perfect balance between functionality and ease of use, it also gives your AEG a unique look.

If you're looking for a spiffy new flash hider for your SMG-5, you've come to the right page!

Constructed from sturdy alloy, this flash hider sports a birdcage style design, quickly and easily attached / detached using the handy tri-lug attachment system. This flash hider is designed for use with CYMA CM.041 models, however it should fit other brands of SMG-5.

This Muzzle Device is designed for Airsoft Guns with a 14mm CCW Male Thread (which is 95% of Airsoft Replicas), and is the perfect finishing touch to any custom build, and is especially useful for hiding an Inner Barrel Extension. If you have a Airsoft Gun with a 14mm CCW Thread, custom or not, then the CYMA Dummy Sound Suppressor will look great sat on the end.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

A simple device yet effective, designed to protect your Airsoft gun's outer barrel threads from damage during gameplay and transportation, or any other situation which might leave the threads exposed to the elements.  

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.