All External Airsoft Parts & Attachments

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

A replica of the legendary PBS-4 Suppressor, lovingly recreated using Aluminium and with a 14mm CCW Thread, so that it can attach to more than just an AK! This Suppressor is designed for 5.45x39mm AKs (in the real world), but is an unusual design that can add a cool touch to any replica. If your Airsoft Gun has a 14mm CCW Thread, this Suppressor will fit and work, and is the ideal way to make your Gun stand out from the crowd.

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

If you are running a SCAR and you want to make it sexy a rail extension is the key to making jaws drop! The Double Bell M-LOK 5 Inch Handguard Extension For SCAR is designed to fit the Double Bell SCAR-H (it will not fit the Double Bell SCAR-L) but should also fit the DBoys SCAR-H and VFC SCAR-L and SCAR-H AEGs as well as others based on the VFC construction style.

The handguard boasts CNC Aluminium construction for precision and weight savings and comes packaged with a 9.3cm/3.75-inch barrel extension so your outer barrel is the correct length for the extension. Present on each side is a QD sling socket to give you the option to add a slick QD sling setup with QD sling swivels. On each side and on the bottom we have M-LOK negative space attachment slots and on the top of the extended piece there is a short length of 20mm Picatinny rail in the ideal spot to mount a PEQ, DBAL or tactical flashlight. Ditch those 20mm rails and get some M-LOK on your SCAR and get it ready for combat in the 2020s!

An Aluminium constructed charging handle extension for AK style replicas.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

An Aluminium constructed Rail Mount for AKS-74U Platform Airsoft Replicas, which will install to the Rear Ironsight Block and provide a 20mm RIS/RAS Rail for installing a Red Dot Sight. If you own an AKS-74U and you want to start decking it out with bells and whistles, then this is an ideal place to start.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

A 76.2mm long barrel extension for any AEG with a 14mm CCW thread on its outer barrel.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

If you have a front wired AEG with a tiny battery compartment, we have just what you need! The PEQ15 Battery Container from Specna Arms is a stylish looking polymer box, designed to hide your AEGs battery and allow you to use PEQ style block batteries in a front wired AEG which is short on space. This battery box is realistically sized, and sports all the fine details of a real PEQ15, but in non-functional "dummy" form. Unlike many PEQ battery boxes out there, this one also includes mock lens covers with mirrored inserts and realistic warning labels in all the correct places, making this "dummy" PEQ hard to distinguish from the functional versions! This battery box should fit any battery designed for a "Micro PEQ" or "PEQ15" style battery box.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

If you want your AEG to send shivers down the enemy's spine, if anything can do it, this muzzle brake can! The 5KU DTK-2 Russian AK Muzzle Brake is patterned after the real steel Zenitco DTK-2 and is a squat design with a pair of massive ports on each side and two smaller ports on the bottom.

The real device is designed to reduce felt recoil and compensate for muzzle climb and is generally seen on carbine and SBR length AK rifles, though the 5KU example will fit both 14mm CCW and 24mm CW Russian threads, making it compatible with practically any Airsoft gun on the market. If you want to change up the looks of your rifle and make it that bit more menacing, this brake will do it!

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.