Two-Tone Airsoft Assault Rifles

If you are keeping your eye out for a modernised 416 style AEG platform, the Specna Arms SA-H12 ONE™ Carbine would be a fantastic choice. As part of Specna Arms' ONE™ range, the SA-H12 boasts full metal construction and flawless sand blasted and anodised finish across all parts, offering you the choice of tactical black or stylish and modern multi-bronze finish, matching the real rifle perfectly. 

On the inside, the SA-H12 is equally impressive, with a reinforced version 2 gearbox equipped with steel gears, 8mm ball bearing bushings, a steel spring guide and the Enter & Convert quick change spring system, allowing for quick and easy power tuning without opening the gearbox. 

The most recent batch of SA-H12s has also been upgraded with the latest rotary HOP-up unit design for the M4/AR-15 platform, offering finer increments of adjustment and improved ability to hold its setting under the vibrations of full auto fire. All of the internals are Tokyo Marui AEG spec, opening up almost limitless upgrade potential, from adding a MOSFET to an HPA engine. If you are after a 416 but want something slicker and quicker than the usual quad-railed configuration, the SA-H12 ONE™ is the one to go for!

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

An electric powered replica of the classic M4A1 platform, complete with a shorter barrel than standard. The Specna Arms EDGE series of replicas has loads of features that set them apart from any other out-of-the-box AEG.

If you are working on your Special Forces loadout but you haven't had time to hit the gym, Delta Armory has the MK18 for you! The DA-B15-ETU BRAVO™ is styled to match the real MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but is far lighter and handier than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high density polymer receiver and buffer tube. 

Inside, this MK18 MOD.1 is rather special, being fully upgraded internally with little room for more. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. If you want the looks of the MK18 without the weight, the DA-B15-ETU BRAVO™ brings the MK18 styling along with incredible performance!

A solid and dependable AR Platform Airsoft Gun, powered by a Battery in the Stock. This 2.0 variant of the Specna Arms EDGE Series updates the MOSFET with a GATE ASTER™ for more control than ever before, as well as a Solar™ Electronic Trigger and Helium™ Flat HOP Bucking. Packaged with the uprated internals that makes the EDGE series so special, this is one exceptional 'out of the box' Airsoft Gun. Whether you're a new player wanting to get the most for their money, or an experienced player looking for the next step up in quality, then the Specna Arms SA-E23 EDGE 2.0 is exactly that.

Available in Black or with a gorgeous dual-tone Chaos Bronze highlight.

An Airsoft 6mm BB Gun which takes a base platform M4, then adds a fancy Handguard System to give this AEG a unique look and feel. This M4 replica is constructed mainly from Polymer, with a Polymer Receiver, Stock, Buffer Tube, Handguard, Flash Hider and Sights, with an Alloy Outer Barrel and Internals.

Perfect for CQB combat and manoeuvrability, the Arcturus AT-ST01 sports an ultra-light full polymer build complete with a slimline 10-inch hybrid M-LOK and Picatinny handguard, that offers you the best of both worlds, ready for any type of attachment you can throw at it.

The rifle also features a full length monolithic top rail and sling plate in addition to slimline low-profile stock, which further keeps you agile on your feet in tight spaces. This AEG has everything you'd hope for in a modern AR, especially in a fast-paced CQB environment.

If you are keeping your eye out for a base for your dream DMR build and have a certain sneaky playstyle, the DA-A10 ALPHA™ Silent Ops DMR should fit you like a glove. This M4/AR-15 platform is part of Delta Armory's ALPHA™ line, top of the range when it comes to externals and boasting more than its fair share of pre-upgraded internal parts as a bonus!

Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The quick change spring makes for a relatively easy DMR upgrade, meaning if you want the DA-A10 to live up to its name you'll have a much easier time of it! 

Whether you want a stealthily styled AR platform for mid to long range engagements or you're working on a suppressed DMR build, the DA-A10 ALPHA™ Silent Ops DMR already has the aesthetic and the upgraded internals; all it needs is pointing in the right direction!

If you're looking for a compact AR platform with more than its fair share of perks, look no further than the Delta Armory DA-A13-ETU ALPHA™. This AEG is at the very top of Delta Armory's range, boasting the full metal external build of the ALPHA™ series paired with the ETU series internals, resulting in a beast of a platform, both inside and out.

Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip based on the gunfighter mod.3 grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

The news is similarly impressive inside! The version 2 gearbox has a reinforced shell, CNC aluminium piston and cylinder heads, CNC steel 16:1 gears running on 7mm ball bearing bushings and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response. The barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, granting this compact PDW-esque AR surprising long range performance. A programmable ETU/MOSFET system improves electrical efficiency and allows for burst mode, binary trigger and pre-cocking to be programmed in using the fire controls of the AEG itself. If you don't want the fuss, troubleshooting and tuning that comes with upgrading your own beast of an AEG, no need to put yourself through that, Delta Armory has done it for you!

Entirely ambidextrous controls on an AR platform, giving the ultimate in usability to every shooter. The Perfect length for CQB and still a fantastic performer outside too.

If you're all about your modern M4/AR-15 platforms, the Double Eagle M920A Aeroknox AX//15 AEG is certain to catch your eye. This full metal M4/AR-15 platform sidesteps convention with a unique receiver, handguard, muzzle brake and pistol grip based on designs from Aeroknox LLC of Texas, with official licencing of course!

In line with other recent Double Eagle releases, the AX//15 boasts the impressive FALCON EFCS MOSFET pre-installed, giving the AEG an astonishing trigger response and rate of fire thanks to the improvements in electrical efficiency along with the ability to program the fire controls for burst modes, binary trigger and trigger sensitivity. These features are usually only found in AEGs twice this price! While it shoots like a dream, the AX//15 looks even better, with immaculately engraved Aeroknox trademarks across the design, flawlessly machined metal components and strong high density polymer furniture.

While high-end AR AEGs with interesting looks are a pound a penny these days, the AX//15's combination of slick ergonomics, gorgeous looks, phenomenal performance and great value for money make it a Patrol Base favourite. Make sure you get yours before we buy them all for ourselves!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

This AKM Platform Airsoft Gun is powered by a battery in the stock and features realistic construction with Real Wood Furniture, as well as a Dovetail Side Rail for AK specific attachments.

An Airsoft 6mm BB Gun Replica of the M14 Enhanced Battle Rifle, and is every bit as beautiful as it is heavy. The Rifle features a highly realistic construction, with an Alloy Receiver, Handguard, Outer Barrel, Flash Hider, Iron Sights, with a Polymer Handguard Covers, Pistol Grip, Stock and features all the bells and whistles you would expect from such a rifle. 

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.

The Double Eagle M904H is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA Platinium line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm ball bearing bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a stainless steel cylinder and a polycarbonate piston with a full steel tooth rack. Tying this selection of high end internals together is the CYMA Platinum MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

Part of the EDGE 2.0 series of rifles this Airsoft AEG features a high quality build and a range of high quality upgrades right out of the box. No need to worry about upgrading the rifle, this gun comes pre-packed with everything you'll ever need. Just pick up the gun and play. You'll struggle to find another Airsoft replica in this price range with the features this replica has.

Specna continue with their exceptional EDGE 2.0 line with the SA-E13-RH. An ultra-modern carbine that features a totally unique looking front end with weight-reducing cuts that show off the glorious 14.5 inch barrel. Included are a host of unique Specna external goodies such as the refined "billet" style receiver and Heavy Ops Stock.

But Specna's quest to modernise Airsoft doesn't stop there as the SA-E13-RH comes with a wealth of top-notch internals such as the advanced Gate ASTER MOSFET, a high torque motor and a healthy helping of reinforced gearbox components all contained in the glorious ORION gearbox with a 6.03mm tightbore inner barrel and rotary HOP-up unit, all coming together for an impressively accurate and advanced carbine.

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*