All Sniper Rifles

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

A lightweight spring powered Airsoft 6mm sniper that is ready to go out of the box - no assembly required! Supplied with a 4x32 rifle scope with mount rings, a bipod and two magazines, the Tango T96 is everything you need to get started in the world of Airsoft sniping. 

The Double Eagle M61 Spring Action Sniper is a lightweight and effective Airsoft Sniper Rifle that works by pulling back the Bolt to cock the Spring and feed a BB into the chamber. Unlike most up-market Sniper Rifles, this doesn't require any tinkering out of the box besides setting the Hop Up and using a high quality BB. Firing at ~466FPS w/ 0.2g BBs, you're clear to take it straight out the box and get playing competitively.

The Double Eagle M61 Spring Action Sniper is a lightweight and effective Airsoft Sniper Rifle that works by pulling back the Bolt to cock the Spring and feed a BB into the chamber. Unlike most up-market Sniper Rifles, this doesn't require any tinkering out of the box besides setting the Hop Up and using a high quality BB. Firing at ~466FPS w/ 0.2g BBs, you're clear to take it straight out the box and get playing competitively.

If you are looking for a cost effective starting point to try your hand as an Airsoft sniper, or you need an ultra-lightweight counter sniping solution for those moments you find yourself pinned down, the M52 from Double Eagle would fill the role well. This sniper rifle comes out of the box firing around 380 FPS with a smooth bolt pull, enabling faster follow up shots and making this rifle accessible for those with lower physical strength. The M52 is constructed entirely from lightweight ABS polymer and includes an alloy 20mm Picatinny receiver rail and alloy bolt handle to add rigidity where needed. 

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1. 

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1. 

A Spring-Powered Airsoft Sniper Rifle which is based on the L96 platform, outputs a healthy 415FPS and comes included with a magazine and Speedloader.

If you are in the market for a pre-upgraded sniper rifle that isn't based on a VSR-10 platform, the Novritsch SSG96 Mk2 should do the trick. This spring bolt action sniper rifle is patterned after the real steel L96, the primary sniper rifle of the British Army and numerous other military and law enforcement organisations across the globe.

The Mk2 version is the latest iteration of the SSG96, boasting a new TDC HOP-up unit with toolless adjustment, a straight fluted barrel, spiral fluted bolt and side folding stock. All of the Novritsch improvements in the original SSG96 are present in the latest version, including a left/right swappable bolt handle, CNC machined receiver and fibre-reinforced high density polymer chassis.

On the inside, the Novritsch SSG96 is pre-upgraded with a plethora of high strength steel parts. These include steel trigger sears to allow for super strong springs, a stainless steel cylinder for perfect air seal and a stainless steel spring guide to complete the robust internal setup. The HOP-up rubber is provided by Maple Leaf, offering supreme accuracy and range, and the inner barrel is stabilised inside the outer barrel using a pair of spacers; an essential aspect of a high-performance sniper rifle. If you ever have dreams of running a perfectly set up Airsoft sniper rifle but you don't know where to start, you can start right here!

If you are into WW2 reenactment and you have your sights set on a Red Army loadout S&T have a real treat for you! The Mosin-Nagant M1891/30 Spring Bolt-Action Rifle Replica is an almost flawless replica of the real M1891/30 Mosin-Nagant which served the Soviet Red Army throughout WW2 and has solidified its place in history thanks to the huge volume of these rifles produced and its fanbase in the US civilian firearms world.

S&T's Mosin replica follows the same format as its superb M1903 Springfield, Lee-Enfield S.M.L..E and Kar98k replicas, boasting a gorgeous antique finish on its metal components and beautiful real wood furniture to make a rifle that would be equally at home in a museum as it would be on the skirmish field. From a performance standpoint, the Mosin-Nagant is no slouch, coming out of the box shooting at 360 FPS with a smooth bolt pull and compatibility with VSR-10/GBB type inner barrels and HOP-up rubbers. If you need a Mosin-Nagant that shoots as good as it looks, this is the one to choose!

The Double Eagle M62 is a lightweight, bolt action Sniper Rifle which is powered by spring. This means that the Bolt must be pulled back for each shot, just like the real thing, which will compress the Spring whilst loading a BB into the chamber.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

A spring powered, Airsoft 6mm BB bolt action sniper rifle, based on the iconic L96 platform used by the many military and police forces around the world, including the British Army. This variant features a side folding stock and a fluted outer barrel.

A spring powered, Airsoft 6mm BB bolt action sniper rifle, based on the iconic L96 platform used by the many military and police forces around the world, including the British Army. This variant features a side folding stock and a fluted outer barrel.

If you want a Russian sniper rifle forget the Dragunov, you want an SV98! The Snow Wolf SV98 Spring Bolt Action Sniper Rifle is a great example, complete with real-world accurate furniture and a scope, scope rings and a bipod to complete the look.

The Snow Wolf SV98 shoots at a respectable 410FPS +/- 10% straight out of the box and uses the Tokyo Marui L96/M40 feed system, meaning the magazine is exactly where it should be and the HOP-up dial is centrally positioned on the bottom of the stock, offering a wide range of adjustment with audible and tactile clicks so you can add small increments of HOP-up effect easily mid game. Whether you have a sniper rifle collection, a Russian loadout or a hole in your soul the shape of an SV98, this would make a great addition to your arsenal!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

If you have been keeping your eyes open for a high-quality Barrett replica you aren't the only one, but thankfully we now have one! The EMG Barrett M82A1 is officially licenced by Barrett Firearms through EMG and has immaculately engraved trademarks as we would expect, and is constructed entirely from metal save for the massive muzzle brake.

EMG's Barrett is sure to be tough to skirmish with, weighing in at an epic 5.5KG fully equipped and being 1.42m in length, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 400FPS straight out of the box with a remarkably light bolt pull. If you want to be able to say "mine is bigger than yours" with absolute certainty, nothing will do it like a Barrett Light Fifty!

If you have been keeping your eyes open for a high-quality Barrett replica you aren't the only one, but thankfully we now have one! The EMG Barrett M82A1 is officially licenced by Barrett Firearms through EMG and has immaculately engraved trademarks as we would expect, and is constructed entirely from metal save for the massive muzzle brake.

EMG's Barrett is sure to be tough to skirmish with, weighing in at an epic 5.5KG fully equipped and being 1.42m in length, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 400FPS straight out of the box with a remarkably light bolt pull. If you want to be able to say "mine is bigger than yours" with absolute certainty, nothing will do it like a Barrett Light Fifty!

A bolt action, spring powered sniper rifle with an aggressive and modern aesthetic. This is perfect for the sniper who wants an up-to-date rifle which is easily transported thanks to the folding stock.

Sick of having the same old Airsoft sniper rifle as everyone else on the market? Look no further! This is the most tactical and advanced sniper available, without completely destroying your own bank balance. 

Whether you are looking for a cheap route into historical reenactment or a sniper rifle with more classic styling, the S&T M1903A3 Springfield ABS Stock Version was made with you in mind. This spring-powered bolt action rifle replica boasts full metal construction, VSR-10-based internals and a lightweight faux wood ABS polymer stock, reducing weight and allowing you to use this Springfield as you would a VSR-10; with no guilt about getting it dirty and dinged up.

For those who must have an optic, a scope mount is available, and those who need upgrades will be happy to learn that almost any part you would need to upgrade on the Springfield is compatible with VSR-10 parts. As it comes, we are treated to a 6.03mm tightbore measuring an epic 518mm in overall length, giving the Springfield an accuracy edge straight out of the box. As an alternative to the VSR-10 for a sniper rifle build or shell ejecting rifles for reenactment, the S&T Springfield ABS stock version perfectly marries the classic look with skirmishable practicality!

If you want to sample Airsoft sniping without getting in too deep, this bundle is for you! The M52 Sniper Rifle Bundle includes the Double Eagle M52 spring bolt action sniper rifle, two spare 27rnd M52 magazines, a Theta Optics 4x32 IR Rifle Scope w/ Mounts, VORSK 0.28g BBs and an Evolution hard case to keep everything tidy. 

The M52 is a great platform as a first sniper rifle and is ideal for new skirmishers with less physical strength, being an ultra-light build with an easy and smooth bolt pull. Theta Optics' 4x32 IR Rifle Scope is its ideal companion, offering enough magnification for long-range spotting and engagement without being overly bulky or heavy. Having spare magazines will keep you in the fight for longer, and Evolution's hard case will keep the setup protected during storage and transportation to and from a skirmish site. 

If you have your sights set on becoming an Airsoft sniper but you don't want to sink loads of money in before sampling the playstyle, the M52 Sniper Rifle Bundle is an affordable way to get your eye in before taking the plunge on a far more expensive platform!

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.