Airsoft Rifle Magazines

Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for M4/AR15 AEG platforms. The magazine is constructed from high-density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning there is no "battle rattle" as you run which will give your position away.

This magazine also boasts a crackle texture on the sides to allow for a firm grip on the magazine during reloads in inclement weather and also allows you to use the mag as a makeshift vertical grip when shooting in cramped CQB environments. At the top of the magazine body, the clear internals are visible through the magazine catch hole on the left side which allows you to confirm whether or not the magazine is fully loaded. Handy for those who run magazines on magazines on magazines, it's easy to get confused!

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The A&K 140rnd Steel Mid-Cap Magazine is designed to fit M4/AR-15 AEGs. It is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need affordable M4 mags to complete your loadout, this is a great one to consider!

Authentic to the real world STANAG magazine, this has been constructed with heavyweight alloy steel for a more hefty and realistic feel than your average Airsoft magazine. It is of Medium capacity and holds 140 rounds, it features a spring-loaded follower, guaranteeing consistent feeding so your Airsoft replica is unlikely to misfeed.

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

A Polymer constructed High Capacity magazine for the G&G TR16 MBR .308 series of AEGs, which holds a total of 370rnds and is filled by pouring BBs in through the top Fill Window. The winding wheel on the bottom is then turned to feed BBs in to the replica.

If you are looking for some extra firepower for your PCC45 or MXC9 AEG, you have found it with G&Gs drum magazine! With a whopping 1500 round capacity, you will easily have enough BBs on board to keep the entire enemy team's heads down! Nothing makes a high-rate of-fire beast as sweet as having a serious volume of ammo to feed it with! 

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading. 

If you need mags for your AK and you like them modern, the Specna Arms S-Mag is a fine choice. This variant of the S-Mag is constructed from strong high-density polymer and designed for the Specna Arms J-series but will also fit and feed in most other Airsoft AK AEGs. Being a spring-loaded mid-cap, this magazine won't rattle as you run but boasts a respectable 175 BB capacity so you can shoot more and rack up more kills. 

Loading the S-Mag is the same process as with other mid-caps: fill through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool. The external shell of the S-Mag also boasts SA texture on each side to improve grip and provide unique looks. 

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you need mid-cap mags for your Classic Army based FAL AEG these should do the trick! The Fuxing 160rnd Mid-cap Magazine for JG/CA LK58/ SA58 AEG is constructed with a steel shell, polymer internals and a steel feed spring and as with all mid-caps, this thing doesn't rattle like maracas as you advance on the enemy!

The mag can be loaded through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading rod/tool and needs to be inserted into your LK58 or SA58 AEG with a "rock and lock" motion. The mags are designed for the JG LK58 AEG platform but should also work in the Classic Army SA58 on which the design is based.

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

A high capacity magazine designed for G&G M14 AEGs. An utterly essential piece of Airsoft kit for any G&G M14 owners, this spare high cap magazine allows you to carry more ammunition in the field without needing to make a hasty retreat to reload your magazines.

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

If you are looking for magazines, BBs and a Speedloader for your M4/AR-15 platform AEG why not get them all in one? The Lock 'n Load Bundle combines a 1KG bulk bag of our favourite BB weight for outdoors skirmishing, 0.28G from Evolution Airsoft, 2 x NUPROL Adjustable capacity M4/AR-15 AEG magazines and a Big Dragon 100rnd Speedloader. 

NUPROL's magazine should work in the vast majority of M4/AR-15 platform AEGs and gives you the choice of running them as real cap 30rnd mags or 140rnd mid-caps for when realism comes second to firepower. Whether you attend Milsim events or just regular walk-on skirmishes, this pack should see you well-equipped for battle!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!