Airsoft Pistol Magazines

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A 27rnd spare or replacement gas magazine for G&G's latest line of GPM92 gas blowback pistols.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

A Gas Blowback Airsoft Pistol Magazine for the Tokyo Marui TM45 Range. 

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

If you are after spare magazines for your brand new Evolution Airsoft E911, whether it is the discrete Defender model or the super tacticool Special Operations model, you are in luck! This magazine holds 25 rounds and can be loaded using a speed loader, either through the feed lips at the top of the mag or the fill port at the front, accessible when the follower is pulled down. This is a green gas magazine, and the fill valve can be found on the baseplate of the mag. This magazine is TM spec, though we have not had the opportunity to test it with a TM 1911 we can confirm that it works with the Army MEU, and potentially others!

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

A Green Gas, 22 round magazine for the UMAREX Heckler & Koch VP9 GBB Pistol.

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.

If you've bagged yourself a bargain backup pistol, perhaps a spare magazine would make it a bit more useful! Introducing the LS B84 Gas magazine, a spare original magazine for the LS B84 NBB pistol. The magazine holds 15 rounds and can be loaded using a speed loader or by hand, through the fill/feed port on the front of the magazine. The gas fill valve is located on the magazine base and this magazine is compatible with green gas, ASG Ultrair, and summer gas.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

A replacement magazine for EX Series PX4 Style WE Airsoft gas blowback pistols.

A Gas Blowback Airsoft Magazine Designed by Tokyo Marui for their XP4 Series range of Airsoft Pistols. The Magazine is constructed from Alloy and is Filled with Green Gas and Loaded with 6mm Airsoft BBs.

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

A magazine for the TM 6mm BB Desert Eagle, finished with a chrome color, this magazines are a must buy for anyone who needs more rounds. 

An Airsoft replica magazine designed for use with Maruis Gas Blowback TM 5-7 Self Loading Pistol, and features Tokyo Marui's usual excellent craftsmanship.

A new design of Airsoft 6mm Dan Wesson revolver cartridges from ASG with a deep grove cut out at the rear.

A spare or replacement CO2 Magazine for the Armorer Works Hi-Capa Series, which are perfect for Winter Airsofting and other cold environments where Green Gas just doesn't have the beans to fire a full Magazine. Constructed from Alloy as a direct replacement, these Magazines work exactly like your originals, with the exception of accepting a 12g CO2 Bulb instead of Green Gas from a bottle. Simply slide the Baseplate off by pulling down the release, and unscrew the CO2 Cover to install a bulb. Play for longer, especially in the cold, with Armorer Works Custom Hi-Capa CO2 Magazines.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.