Airsoft Pistol Magazines

Introducing the Lightweight Green Gas Magazine from Action Army, a 50 round extended magazine for the much-lauded Action Army AAP-01 pistol and TM compatible EU series pistols. This magazine looks like something we have seen before, but at around half the weight! If you want an extended magazine but you don't want to ruin the balance of your pistol, this would be what you need!

If you need mags for your KJ Works or ASG MK1 or MK2 pistol these will do the trick! The KJ Works 16rnd Green Gas Magazine for MK1 NBB pistol is constructed from alloy with a steel feed spring, polymer follower and brass fill valve. The mag can be loaded either by hand with the help of the drag-down follower or using a speed loader through the feed lips on the top front of the mag, and the fill valve is located on the baseplate.

As with any GBB or NBB green gas magazine, the mag and gas can will need to be inverted to fill properly. Whether you run the MK1 or the MK2 platform, these magazines will fit and feed just fine and can also be an easy way to reduce the FPS for more site-friendly performance when it comes to the intensely powerful CO2-fueled MK2 pistol!

A gas blowback Magazine for the WE Europe EU-Series Pistols EU19, and EU23.

Looking for a CO2 magazine for your SRC Hi-capa to see it through the winter months? You have found what you need! This 28rnd CO2 Magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.

This magazine houses a single unthreaded 12g CO2 capsule which can be loaded through the bottom of the magazine by removing the baseplate. If you want to guarantee your SRC Baba Yaga can hack it when the temperature gets low a CO2 mag is the perfect solution!

An extended 32 round magazine designed for the WE P-Virus P226 gas blowback pistol. 

If you want to keep your Desert Eagle running when the cold sets in a CO2 mag is the only way to do it. The 27rnd CO2 Magazine for WE/Armourer Works Desert Eagle GBB Pistol is constructed from alloy with polymer feed lips, a brass knocker valve and rubber gas route bucking. This CO2 mag is designed for the WE/Armourer Works Desert Eagle GBB pistol and will not work in the KWC full auto version.

The magazine can be loaded through the feed lips at the top of the design and due to the lack of an external follower, a speedloader with a GBB adapter is recommended for ease of loading. The mag takes 12g unthreaded CO2 capsules and a single capsule can be inserted from the left side of the magazine and tightened via the Allen screw on the baseplate. As always, this magazine will require lubrication to maintain its health in the long term, and we recommend applying some Silicone Dropper Oil to the top of each CO2 bulb before inserting it. Keep your mighty Desert Eagle in the fight all winter with this CO2 magazine!

A gas blowback magazine designed for the WE Europe EU-Series compact pistol range, and is designed to fit the EU26, EU27, and the EU33 Advance with the grip extension removed. The magazine is constructed from Alloy, with a Polymer base plate, feed lips and follower, and comes fitted with a unique curved base plate.

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

One magazine probably isn't going to be enough for a pistol that has you wanting to keep shooting. This heftily constructed M9A3 magazine holds 22 rounds and takes 12g CO2 bulbs, with a beautiful matt tan finish to match your pistol and also the real deal!

An 18 round Co2 Powered Gas Magazine for the UMAREX Glock 17 Gen4 / Gen5 Gas Blowback Pistol, featuring a top of the range build quality & official Glock trades.

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

This alloy magazine can hold up to 24 rounds to use with any generation of the Raven R series or WE Europe F series of pistols. The mag uses green gas, which can be added via the valve on the base of the magazine. For filling with BBs, there is a window on the front which is wider towards the base, accessed when the follower is pulled down.

A CO2 magazine designed for the WE EU-Series pistols, allowing you to make the move from Green Gas to CO2. The magazine is robust and gives excellent power for every shot, built from Alloy the magazine comes with a steel screw in base for extra durability. 

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

A spare magazine for WE Europe's Makarov W65U pistols. The magazine is constructed entirely from Alloy and features an Alloy base plate, making the magazine durable and more resistant to drops. 

A gas blowback Airsoft CO2 magazine developed by VORSK for their Hi-Capa Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard length and holds 23 rounds and is a direct replacement for the magazine which comes with the pistol. The mag is filled with BBs from the top or front and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK Hi-Capa Series pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A 50rnd Extended Gas Magazine for a range of ASG Gas Replicas, including the B&T USW, the Shadow 2, SP-01 and CZ 75. If you own one of these replicas and want the ability to throw 50 BBs down range in a hurry, then the firepower increase of a 50rnd Magazine cannot be overstated.

A High Capacity Gas Magazine for WE B92 Airsoft Gas Blowback Pistols. 

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload. 

A CO2 powered magazine designed for use in the RAVEN EU Series 18 GBB pistol and WE Europe's G-Series of pistols, which performs better than traditional gas magazines in colder weather.

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

A 20 Round Green Gas Powered Magazine designed for the GLOCK 19X by UMAREX.

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

A 26rnd CO2 powered magazine for ASG's latest generation of the CZ Shadow pistol, which is compatible with the original SP-01 as well as the Shadow 2, and accepts a CO2 bulb via the threaded cap on the bottom.

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

This is a Spare Magazine for the G&G Armament Piranha Gas Blowback Airsoft Pistol, constructed from tough Alloy to the original specification. It is filled with BBs using a Speedloader and has Gas inserted from the baseplate via the Inlet Valve. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer, rather than scurrying back to the Safe Zone to reload.

An 8 round magazine for the SRC 7.65 pistol.