Airsoft Gas / CO2 Magazines

A Green Gas powered Spare Magazine for the ASG STI Combat Master Pistol. If you own one of these Sidearms, chances are you're a fan of the film. If you're a fan of the film, chances are you're going to want to fling Magazines all over the place. Stock up on Spare Mags today to give you the best chance of avenging your pupper, and so you can spend more time playing, and less time back in the safe zone reloading.

A spare Magazine for the Tokyo Marui Airsoft Hi-Capa 5.1 6mm BB Pistol Range. The Magazine is constructed with an Alloy Body, and a Polymer Feed Lip, Magazine Follower and Base and features a Chrome Finishing. 

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

An Alloy constructed 23rnd magazine for the Vorsk Vengeance Hi-Capa Gas Blowback Pistol.

A gas blowback Airsoft CO2 magazine developed by VORSK for their Hi-Capa Series range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard length and holds 23 rounds and is a direct replacement for the magazine which comes with the pistol. The mag is filled with BBs from the top or front and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.

If you're looking to bolster your VORSK Hi-Capa Series pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!

A replacement or spare Gas Tank for the Golden Eagle Type 870 Series M870 Gas Airsoft Shotguns. Made to the original specifications, this Gas Tank will pop into the Stock of a Type 870 Series M870 Gas Shotgun and keep you in the fight for longer. If you own a Gas Golden Eagle M870 and want to carry Spare Tanks rather than a large Bottle of Gas in the field, then these Gas Tank replacements are ideal for you.

A gas blowback magazine designed for the WE Europe EU-Series compact pistol range, and is designed to fit the EU26, EU27, and the EU33 Advance with the grip extension removed. The magazine is constructed from Alloy, with a Polymer base plate, feed lips and follower, and comes fitted with a unique curved base plate.

A CO2 powered magazine designed for use in the RAVEN EU Series 18 GBB pistol and WE Europe's G-Series of pistols, which performs better than traditional gas magazines in colder weather.

A replacement or spare Magazine for a RAVEN branded Hi-Capa 4.3 or 5.1. It holds a total of 25rnds and is powered by a 12g CO2 Bulb, which means it works far better in the cold than a Green Gas Magazine. This Magazine will provide much stronger recoil and better shots-per-magazine, especially when Winter is upon us.

A Gas blowback magazine designed as a replacement or spare for the KC-02 Special Teams Carbine licensed by ASG. With a an ammunition capacity of up to 29 rounds. 

This is a Spare Magazine for the G&G Armament Piranha Gas Blowback Airsoft Pistol, constructed from tough Alloy to the original specification. It is filled with BBs using a Speedloader and has Gas inserted from the baseplate via the Inlet Valve. If you own a G&G Piranha Pistol, then Spare Magazines are an absolute must for staying in the field longer, rather than scurrying back to the Safe Zone to reload.

They've only gone and done it, the absolute lunatics! A drum magazine for G&G GTP9 and SMC9. Clearly G&G have been listening to the community and have brought us this 300 round wheel wound drum mag resulting in some insane firepower for your now portable LMG in pistol form factor!

A gas blowback magazine designed for use with the WE Europe P08 Luger 6mm Airsoft BB gun. The magazine is constructed fully from Alloy and features a Polymer BB feed guide.

These magazines are perfect for those who have the 3.8 Hi-Capa pistol, allowing you to have more shots available and allowing you to practice pistol loading drills.

An Airsoft 6mm BB gas blowback magazine for the 4.3 Hi-Capa pistol series. The magazine is constructed from Alloy, with Polymer feed lips, base plate and follower.

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.

An Alloy constructed Gas Powered magazine for the SRC branded TT-33 replica (SR-33). It holds a total of 11rnds and is filled from the bottom with Green Gas via the Inlet Valve. The follower is easy to pull down from the side, and it can be easily loaded by hand or using a Speedloader. Be careful not to let the follower spring up otherwise the feedlips could be damaged.

If you run your Hi-Capa as a primary and find yourself short on ammo, the 44rnd Extended Hi-Capa Magazine for R501/R603/R604 GBB Pistols will keep you shooting for longer! This extended green gas magazine is compatible with Army Armament Hi-Capa GBB pistols but should also fit most Tokyo Marui-based Hi-Capa clones. This is the chrome silver version, ideal for the stylish skirmisher. If you need the black version, check it out here!

Constructed from alloy with a CNC aluminium baseplate and polymer feed lips, loading this mag is the same process as any other GBB pistol magazine; use a speed loader or loading tool and load either through the feed lips on top or by pulling the follower on the front down and loading through the widened section. Filling the amply-sized gas reservoir is equally easy; simply invert the magazine and gas canister and press the nozzle of your canister into the fill valve on the bottom of the mag.

If you use your Hi-Capa as a primary for CQB or like to keep a stendo on hand for emergencies, the Army Armament 44rnd Extended Magazine for R501/R603/R604 GBB Pistols will be a useful addition to your kitlist!

A magazine designed for WE brand AR36 / G39 Airsoft gas blowback rifles.

If you want to take pure advantage of the AAP-01's insane rate of fire or you operate with the philosophy that reloads are for losers, the Action Army 350rnd Drum Magazine for AAP-01 GBB Pistols is perfect for you! This green gas drum magazine operates via a "flash mag" type system, meaning instead of winding an awkward wheel to keep the mag feeding you simply need to pull the steel drawcord on the base 4-5 times and you're ready to rock. 

The Drum Magazine holds 350 BBs, more than 10 times the capacity of a standard AAP magazine and around 7 times the capacity of an extended AAP magazine; the perfect thing for AAP owners making full use of full auto and those who move so fast they ain't got time to reload! 

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

Suppose your Tokyo Marui Saiga-12K needs some spare magazines to keep it fuelled during a skirmish, the Tokyo Marui 45rnd Saiga-12K Magazine is exactly what you're searching for! This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!

The magazine holds 45 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To load this magazine, you have to use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.

The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine.

Want a higher capacity for your GTP9, but don't want to be slowed down by the extra weight?

G&G have revised their original design with a 50 round, extended pistol mag that is now 46% lighter, keeping you fast and agile and helping to keep your reload buttery smooth every time.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

A spare magazine for the Gas Blowback submachine gun; the WE SMG-8, and the WE SMG-A1 (Also known as the New Wave - NP7).   

*Please note that this magazine is not compatible with the Tokyo Marui SMG-7

This Airsoft CO2 magazine designed for use in the WE B92, SAMURAI EDGE and other pistols. Each magazine is of a full metal construction and holds up to 25 rounds. The magazine is compatible not only with the Samurai Edge Pistol, but with any WE B92.

A CO2 magazine in that holds up to 25rnds at a time. CO2 powered the 12g bulb is stored in the bottom of the magazine with an easy to release base plate and easy access CO2 base plate. 

A 26rnd CO2 powered magazine for ASG's latest generation of the CZ Shadow pistol, which is compatible with the original SP-01 as well as the Shadow 2, and accepts a CO2 bulb via the threaded cap on the bottom.

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

A spare or replacement Gas Magazine for the G&G Armament GTP9 and SMC9 Airsoft Guns, holding a total of 23rnds and being filled with Green Gas from the Inlet Valve on the Baseplate like any other Airsoft Green Gas Magazine. Whether you own a GTP9 and need more Magazines, or you own an SMC9 and you want a shorter Magazine for ease of use and/or aesthetics; if you need to lay down more fire in your Airsoft Games, then you need to stock up on Spare Magazines today.