Airsoft Electric Gun Magazines

Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for M4/AR15 AEG platforms. The magazine is constructed from high-density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning there is no "battle rattle" as you run which will give your position away.

This magazine also boasts a crackle texture on the sides to allow for a firm grip on the magazine during reloads in inclement weather and also allows you to use the mag as a makeshift vertical grip when shooting in cramped CQB environments. At the top of the magazine body, the clear internals are visible through the magazine catch hole on the left side which allows you to confirm whether or not the magazine is fully loaded. Handy for those who run magazines on magazines on magazines, it's easy to get confused!

A low capacity AR36 magazine from ASG, with a transparent Polymer casing and dummy rounds which can be seen through the case.

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

A Polymer constructed High Capacity magazine for the G&G TR16 MBR .308 series of AEGs, which holds a total of 370rnds and is filled by pouring BBs in through the top Fill Window. The winding wheel on the bottom is then turned to feed BBs in to the replica.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The A&K 140rnd Steel Mid-Cap Magazine is designed to fit M4/AR-15 AEGs. It is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need affordable M4 mags to complete your loadout, this is a great one to consider!

Authentic to the real world STANAG magazine, this has been constructed with heavyweight alloy steel for a more hefty and realistic feel than your average Airsoft magazine. It is of Medium capacity and holds 140 rounds, it features a spring-loaded follower, guaranteeing consistent feeding so your Airsoft replica is unlikely to misfeed.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

If you are looking for some extra firepower for your PCC45 or MXC9 AEG, you have found it with G&Gs drum magazine! With a whopping 1500 round capacity, you will easily have enough BBs on board to keep the entire enemy team's heads down! Nothing makes a high-rate of-fire beast as sweet as having a serious volume of ammo to feed it with! 

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

Whether you are going a Vietnam war loadout, or you just like the compact form and unmistakable design of the legendary MAC-10, you will need some spare mags to run it in true SMG style! The JG 450rnd High-Cap Magazine is designed for the JG0452 MAC-10 AEP, but should also fit and feed in the TM MAC-10 AEP. This magazine is a wheel wound high-cap constructed with a steel shell and polymer internals. The fill window can be found on the top of the magazine, and can be opened by hand and the BBs poured straight in. The winding wheel is located on the bottom of the magazine and is a slightly wider design than the norm, meaning more comfort if you have to wind in a hurry!

Looking for Grease Gun mags? The Snow Wolf 520rnd High-Cap Magazine For M3/M3A1 Grease Gun AEG is authentically built with a steel shell and is a wheel wound high cap magazine which holds 520 BBs. The magazine can be loaded through the fill window at the top of the magazine body by pouring BBs straight in and the winding wheel is located on the baseplate and needs to be wound up to tension the mag.

This magazine is compatible with the Snow Wolf M3 and M3A1 Grease Gun AEGs but may not be compatible with other brands.

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

A  Full polymer constructed High Cap Magazine for the G&G branded G36 series AEGs. Perfect for those who want to spends more time shooting rather than reloading. 

If you're looking for magazines for the fresh new sub gun on the block, the G&G MXC9? You have found them! The MXC9 medium capacity magazines are compatible with both the MXC9 and the G&G PCC.45 and are available in either 130-round or extended 170-round flavours. 

These magazines are spring loaded medium capacity magazines and will require a speed loader or loading rod to fill, via the fill/feed port at the top of the magazine body. Both magazine styles are constructed from rigid high density polymer and include a clear polymer witness window on either side so you can keep track of your round count and never be caught off guard! 

A 530 round high capacity, wheel-wound magazine, designed for use with G&G's UMG SMG electric replica. Constructed from durable, high strength and lightweight polymers.

Constructed from heavy duty polymer, the most apparent and eye-catching feature of this magazine is the transparent side panels showcasing the 9 red and gold mock shotgun shells within. that adds to the realistic aesthetic.

The magazine itself holds 100 rounds and is a mid-cap magazine and is loaded from the top using a speed loader. It being a mid-cap design also means that there is no 'battle rattle' from loose BBs or wheel winding as you would get in a high-cap magazine. The external of the magazine also features a raised ridge pattern for ease of use and provides extra grip even when wearing gloves.

This magazine is compatible with the CYMA CM.102, but may potentially fit other replicas, although please note that this has not been tested.

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. 

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

If you've treated yourself to the British classic SMG, the S&T Sterling, you'll need mags to keep it doing what it does best. The 110rnd Mid-Cap Magazine for Sterling AEG is compatible with all S&T Sterling AEGs, including the E-11 Blaster custom, and is constructed from steel, just like the real thing. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. With no battle rattle to give you away, a flawless steel build for realistic handling and a respectable 110 BB capacity, your S&T Sterling deserves these mags!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

A 50rnd Low Capacity Magazine for the G&G UMG Airsoft Electric Gun. Being a Low-Cap design, this Magazine will feed quietly into the Gun until it is empty, unlike High-Cap designs that will rattle with each movement. The Magazine is filled using a Speedloader to force BBs in through the feed tube at the top. If you own a G&G UMG and want to carry more ammunition without giving your position away to the battle-maraca sound of High-Caps, then the G&G Armament 50rnd Low-Cap Magazine For UMG is ideal.

If you're running an M82A1 AEG, you need some spare mags for it, and AEGs work best with high-caps, right? This mag from Snow Wolf has a whopping 500 round capacity and is wheel wound from the bottom so you won't be switching mags any time soon.

Constructed from lightweight polymer, this mag helps keep the weight of your huge Barrett down. So grab this mag and start picking people off en masse!

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

An incredibly imposing drum magazine that holds a whopping 550 rounds, and is constructed from a dense Alloy for a tough and long-lasting finish. Providing the Thompson M1A1 CM.033 with the classic Gangster-Gun aesthetic that we've infamously come to know and love. 

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

A high capacity magazine designed for G&G M14 AEGs. An utterly essential piece of Airsoft kit for any G&G M14 owners, this spare high cap magazine allows you to carry more ammunition in the field without needing to make a hasty retreat to reload your magazines.