- CYMA CM.513 M4 SD AEG
- 2 Spare mags, speedloader & 0.25g BBs
- Battery, charger, charging bag & gun bag
If you're a sneaky skirmisher seeking an affordable starter pack, the CYMA CM.513 M4 SD AEG Beginner Bundle was made with you in mind! This bundle includes the stealthily styled CM.513 Suppressed M4 SD, 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.
All you have left to buy to get started is your choice of face and eye protection. If you're looking for an easy and affordable way to get into Airsoft, this bundle is it!
- CYMA CM.506 M4A1 RIS CQB AEG
- 2 Spare mags, speedloader & 0.25g BBs
- Battery, charger, charging bag & gun bag
If you're searching for an affordable starter Airsoft package based around a CQB-optimised M4 AEG, you're going to love the CYMA CM.506 M4A1 RIS CQB Beginner Bundle! This bundle includes the CYMA CM.506 M4A1 RIS CQB AEG, 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.
Styled after the US Army's M4A1 with its CQBR (close-quarters battle receiver), this is the ideal beginner pack for fast-moving skirmishers or those who primarily skirmish indoors. With this bundle in your kitbag, you have everything you need to get to work other than your choice of face and eye protection!
- CYMA CM.515 M4/AR-15 AEG
- 2 Spare mags, speedloader & 0.25g BBs
- Battery, charger, charging bag & gun bag
If you're in search of an Airsoft starter pack with everything you need to get stuck in other than eye/face protection, the CYMA CM.515 AR-15 Carbine Beginner Bundle is ideal. This bundle includes the CYMA CM.515 M4/AR-15 AEG, 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.
If you're just getting into Airsoft and don't know where to start, grab this bundle and your choice of face and eye protection and get busy!
- Railed Handguard
- 14mm CCW Thread
- ZnAl Upper Receiver
The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.
- CYMA CM.507 M4A1 AEG
- 2 Spare mags, speedloader & 0.25g BBs
- Battery, charger, charging bag & gun bag
If you're getting into Airsoft and you want a primary with the military look, the CM.507 M4A1 AR-15 Beginner Bundle is ideal. We bundled this US Army style M4A1 AEG with 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.
With this bundle at your disposal, you're ready to rock with this aggressive, "issued" style platform with the only thing left to buy being your choice of face and eye protection!
- High Capacity Mag
- Mock Suppressor
- Rear Wired Gearbox
This Airsoft M4 is constructed from Lightweight Polymer, and features Alloy Internals and a Rear Wired V2 Gearbox. The gun features many useful parts, when compared to the Standard M4A1 Platform, such as a Four Point RIS Rail Handguard, Suppressor and Flip-Up Iron Sights. A great starter rifle for getting into Airsoft.
- High Capacity Mag
- Mock Suppressor
- Rear Wired Gearbox
This Airsoft M4 is constructed from Lightweight Polymer, and features Alloy Internals and a Rear Wired V2 Gearbox. The gun features many useful parts, when compared to the Standard M4A1 Platform, such as a Four Point RIS Rail Handguard, Suppressor and Flip-Up Iron Sights. A great starter rifle for getting into Airsoft.
- 130rnd Capacity
- Wide Compatibility
- Dummy Ammunition
A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.
- 150rnd Capacity
- Steel shell with polymer internals
- For M4/AR15 AEG rifle
If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!
- 200rnd Capacity - Massive!
- High-density polymer construction
- Fits most Airsoft AK AEGs
If you run an AK and you want capacity but without the dreaded battle rattle, CYMA has a treat for you! The 200rnd Polymer Mid-cap Magazine For AK AEG packs a whopping 200-round capacity into a standard length spring loaded mid-cap, meaning no issues getting nice and low in the prone position and of course, no tactical maracas as you chase the enemy down!
These mags are styled after modern polymer magazines for 7.62x39mm style AK rifles and have reinforcement ribs across the design and dual witness windows on each side showcasing mock cartridges for added realism. The magazine is also marked with recessed numbers indicating the capacity of the real magazine, and at the baseplate, we are treated to realistic 7.62x39mm calibre markings. The polymer used in the construction of these mags is very strong and has a textured feel, a hallmark of robust high density polymers with fibre reinforcement. If you need AK mags with a modern look, no battle rattle and an impressive capacity, these are the ones to get!
- Bends over 90°
- Holster Included
- Rubber Mock Knife
A mock Airsoft knife for players to use as part of their rig to look extra menacing, complete the look, or to use as a prop knife for those ever embarrassing knife kills.
- Bends over 90°
- Holster Included
- Rubber Mock Knife
A mock Airsoft knife for players to use as part of their rig to look extra menacing, complete the look, or to use as a prop knife for those ever embarrassing knife kills.
- Extended Magazine
- For AEP Electric Pistols
- Lightweight / Easy to Carry
This is an Extended Magazine for a range of CYMA AEP Airsoft Electric Pistols, which not only has an awesome external design to look like the real thing when inserted, but carries loads more BBs and allows you to make the most of the 'Full Auto' function on your AEP.
- Sliding Stock
- Great starter gun
- Mock KeyMod handguard
If you're looking to get into the sport and get skirmishing, this M4 is for you. With nifty features such as KeyMod Style rail and a top RIS / RAS rail for tactical attachments, the CM.515 takes commonly available and cheap M4 AEG magazines and is already equipped with a 6.03mm tightbore inner barrel for extra accuracy. Hard to believe at this price, right? Well, you better start believing in cheap M4s with tightbores, you're looking at one!
This is the perfect AEG for any player looking to start their Airsoft journey with a budget-friendly AEG rifle that has no trouble competing either in CQB or in the wide spaces of outdoors sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first foray into the world of Airsoft or you are looking for a cheap project gun to customise we are sure you will be impressed with the CM.515!
- Sliding Stock
- Great starter gun
- Mock KeyMod handguard
If you're looking to get into the sport and get skirmishing, this M4 is for you. With nifty features such as KeyMod Style rail and a top RIS / RAS rail for tactical attachments, the CM.515 takes commonly available and cheap M4 AEG magazines and is already equipped with a 6.03mm tightbore inner barrel for extra accuracy. Hard to believe at this price, right? Well, you better start believing in cheap M4s with tightbores, you're looking at one!
This is the perfect AEG for any player looking to start their Airsoft journey with a budget-friendly AEG rifle that has no trouble competing either in CQB or in the wide spaces of outdoors sites. The widely supported and ever-popular M4 platform ensures plenty of room for aftermarket external upgrades to make the gun unique and truly yours. Whether this is your first foray into the world of Airsoft or you are looking for a cheap project gun to customise we are sure you will be impressed with the CM.515!
- 30rnd Capacity
- Alloy construction
- For CYMA CM.030 / 122 / 123 / 126 / 127 / 132 AEP
If you're after spare AEP magazines you are in luck! The CYMA 30rnd Magazine is compatible with the CM.030, CM.122, CM.123, CM.126, CM.127 and CM.132 AEP, and should also fit the ASG XP17 Challenger AEP. This magazine is constructed with an alloy shell, polymer follower and steel feed spring, and can be loaded using an Airsoft speed loader through the feed lips at the top of the magazine body. This magazine holds 30 BBs and is a very compact design so it is easy to carry loads!
- Alloy construction
- For AK-type side rail
- Provides a 20mm Picatinny optics rail
If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.
The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!
- Top 20mm Rail
- Holds Long Shells
- Trigger-Lock Safety
An Airsoft Hand Held Grenade Launcher which is used to fire 40mm Airsoft MOSCART / Grenade Shells. The launcher is heavy duty and is constructed with a full Alloy Body, with a Polymer Grip.
A more traditionally styled M4A1 electric powered replica, aimed towards beginners, featuring a sliding Stock and a four-point RIS handguard for grips, lasers and torches. Constructed from lightweight but tough polymer, it makes for a speedy style of play for all you run and gunners.
If you're in the market for a well supported platform to get you skirmishing or need a dependable backup RIF for when the worst happens, the CYMA CM.507 M4A1 AR-15 AEG has got your back!
- 150rnd Capacity
- Polymer construction
- For Airsoft AK47/74 AEG rifle series
Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.
- 320rnd High-capacity magazine
- Steel shell with polymer internals
- STANAG style M4/AR15 AEG magazine
Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.
- Aluminium construction
- For PDW stock
- Extra space for longer batteries
If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.
Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.
- Alloy construction
- Low profile mount
- 8-slot RIS rail for scope
Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!
- Full Polymer
- Lightweight Construction
- Mini Tamiya Connector
For those of you looking to get into the world of Airsoft, the CM.506 makes for a great starter kit to get you on the field and start skirmishing.
Constructed from lightweight but tough polymer, featuring an Alloy Gearbox, the M4 is a solid platform, supported by many systems should you want to customise or upgrade your rifle down the line, with a myriad of options as you delve into the sport, this M4A1 will suit a vast majority of playstyles.
- Full Alloy Build
- 20mm RIS / RAS
- Railed Top Cover
A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount.
- Electric Pistol
- Full Auto Mode
- Front 20mm Rail
If you are wanting to get into Airsoft skirmishing, look no further than the CM.125, a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent.
Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into action right away.
Constructed with an alloy mock slide and polymer frame, the CM.125 is lightweight and efficient at both semi and full auto, this pistol has everything you need to get started with your first Airsoft sidearm!
- Complete V2 gearbox
- Compatible with M4/AR-15 AEGs
- Quick change spring, ETU/MOSFET & high torque motor
If you have had a gearbox failure and you don't fancy opening it up, the CYMA Complete Version 2 Gearbox w/High Torque Motor & ETU is a pre-upgraded and pre-wired replacement which can be installed with minimal effort and no need to solder or open the gearbox shell. As always, we recommend you have some technical experience before installing a new gearbox, but when it comes to Airsoft upgrades this is about as easy as they get.
This gearbox set is designed for M4/AR-15 AEGs and has the correct nozzle length and selector plate for the task and is also pre-wired to a Deans connector so you can benefit from a lower resistance connector for increased electrical efficiency. Also included with the set is a CYMA high torque Neodymium magnet motor, providing a very snappy trigger response and the power to handle stronger springs than a standard motor.
The icing on the cake is the pre-installed MOSFET/ETU which prevents gearbox lock-up on semi-auto, provides further improvements to the trigger response and a boost to the rate of fire. If your M4 gearbox has issues or you want to freshen up an old M4 with a brand new and pre-upgraded gearbox this set would be a fantastic choice, avoiding the messing around and getting you back to shooting with minimal effort!
- Solid Stock
- For SMG-5 Replicas
- Removable Butt Pad
A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.
- Unique compensator
- Finger ridged receiver
- 21'' Monolithic top rail
Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.
With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.
- High density polymer construction
- 20mm Picatinny rails at 3, 6, 9 and 12 o'clock
- For AK-47/74 AEG and GBBR assault rifles
If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.
The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!
About CYMA
CYMA is renowned for making great starter Airsoft weapons suited for any budget. Originating from China, CYMA makes a wide range of Airsoft AEGs, ranging from M4 replicas, Bolt action sniper rifles and AK47 platform RIFs to various Airsoft SMGs and pump action shotguns. CYMA even makes AEPs (automatic electric pistols), offering replicas of all the iconic designs including Desert Eagle replicas!
In recent years CYMA have elevated its products and brand and is now regarded as a top-quality brand that rivals other premium brands, as demonstrated with their much-lauded Platinum Edition, High-Speed Edition and Blue Edition ranges. CYMA is also behind some of EMG's licensed RIFs, providing the high quality bodies and internals for EMG's replicas.
CYMA also offers a wide array of Airsoft accessories and spare parts such as magazines, RIS/RAS rail systems, complete gearbox upgrade kits and both internal and external parts. CYMA offer something for every Airsofter, at any budget with great value for money.