Two-Tone Airsoft Assault Rifles

If you seek an M4/AR-15 platform with reinforced internals focussed on reliability, the Delta Armory DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG is one to watch. Constructed with a strong high-density polymer receiver and a CNC aluminium handguard, the DA-B06 is perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game.

Inside the DA-B06, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a KeyMod handguard equipped with pre-installed 20mm rail sections and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories! 

If you like your primary simple, reliable and accessory-ready, the DA-B06 BRAVO™ 10” KeyMod M4/AR-15 AEG will do what you need it to, with plenty of upgrade options down the line thanks to its full TM AEG compatibility. At the ideal length to contend with tight corners in CQB and distant enemies outdoors, the DA-B06 is a fantastic multi-role platform!

If you've been checking out MK18 MOD.1 AEG platforms, the Delta Armory DA-A07-ETU ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic option to weigh up. This MK18 MOD.1 AEG adds an enhanced receiver to the Milspec MK18 mix, providing a tasty combination of a proven design with extra consideration given to ergonomics and handling. 

Being an AEG of the ALPHA™ line, this beast boasts full metal construction and the best internals Delta Armory has to offer, including the impressive programmable MOSFET/ETU system. Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The ETU expands on these superb internals by allowing for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response. 

If a MK18 MOD.1 will be your next buy, you have one heck of a decision to make! If you like advanced internals to go with the MK18 aesthetic, you cannot go wrong with the DA-A07-ETU ALPHA™ from Delta Armory!

If you are looking for a base gun for your dream custom AR or you like the classic look, the Delta Armory DA-C01 CHARLIE™ M4A1 is what you need. This M4/AR-15 AEG is styled after the original M4A1 rifle of the 1990s but with some 21st-century ergonomic enhancements to improve handling and a styled-up Delta Armory receiver matching modern real steel "billet" receivers. 

Being a replica of the Delta Armory CHARLIE™ line, the DA-C01 is constructed primarily from high density polymer with alloy trim parts and is kitted out on the inside with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. 

With more pre-upgraded internals than a platform this price deserves and some stylish, modern enhancements, the DA-C01 would make a fine basis for a custom build but can also be left as it is to take advantage of some interesting old-school features!

If you like the integrally suppressed AR look but want something pre-upgraded with more competitive internals than the average, the Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG is the one. This is the ETU-equipped version of the DA-C05 Silent Ops 7, boasting the same strong high density polymer build but with the best internals Delta has to offer currently.

Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response

This marriage of a lightweight beginner-friendly build with top-notch internals makes this a beast of a backup AEG, and perfect for a new or younger skirmisher who seeks no compromise when it comes to performance. If sneaky ARs are your thing, the DA-C05-ETU Silent Ops 7 will see you well-equipped!

If you're a CQB skirmisher and are looking for a new compact AR platform with a ton of nifty features all for a relatively low price, then the DA-B18-EGL BRAVO™ has you covered! This PDW-style AEG comes with a CNC aluminium handguard and a high-density polymer receiver. And of course, the star of the show, the EAGLE™ MOSFET! This ETU allows you to program your preferred firing such as burst modes, binary trigger and an AUG mode.

This AR is equipped with an M-LOK handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out on the inside with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET.

The compact nature of this AEG means that the PDW stock and buffer tube can only accommodate smaller batteries. We at Patrol Base recommend the Specna Arms 7.4V 600mAh 20/40C Battery for PDW as it is specifically designed for PDW-style assault rifles. If you want an advanced compact platform that is perfect for running around in a CQB skirmish, then the DA-B18-EGL BRAVO™ TALOS 3 PDW M4/AR-15 AEG is the one to choose!

If you are working on your Special Forces loadout but haven't had time to hit the gym, Delta Armory has the perfect MK18 for you! The DA-B15 BRAVO™ is styled to match the real steel MK18 MOD.1 rifle issued to US Navy SEALs and Delta Force but this replica is far lighter than full metal versions thanks to its combination of a CNC aluminium handguard and alloy outer barrel with a high-density polymer receiver and buffer tube.

Inside the DA-B15, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. Externally, this beast is rocking a quad Picatinny handguard equipped and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories!

Looking for something that stands out from the crowd of M4s and AKs? Here we have a rifle for those of a discerning taste. The LK58 from JG is a close replica of the real world FAL, a rifle that is often considered the western equivalent of the AK47, due to its widespread use throughout NATO during the cold war. The LK58 is modeled after the American civilian tactical FAL, the SA58, and has all the classic FAL features with a sprinkle of modernity for convenience. 

This Airsoft Electric Gun is a Bullpup Assault Rifle with an Alloy 20mm Rail System at the front, as well as Ambidextrous Controls, Threaded Outer Barrel and a MOSFET to make this a highly adaptable platform.

If you are keeping your eye out for a base for your dream DMR build and have a certain sneaky playstyle, the DA-A10 ALPHA™ Silent Ops DMR should fit you like a glove. This M4/AR-15 platform is part of Delta Armory's ALPHA™ line, top of the range when it comes to externals and boasting more than its fair share of pre-upgraded internal parts as a bonus!

Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The quick change spring makes for a relatively easy DMR upgrade, meaning if you want the DA-A10 to live up to its name you'll have a much easier time of it! 

Whether you want a stealthily styled AR platform for mid to long range engagements or you're working on a suppressed DMR build, the DA-A10 ALPHA™ Silent Ops DMR already has the aesthetic and the upgraded internals; all it needs is pointing in the right direction!

If you're looking for a highly flexible, full metal M4/AR-15 platform, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG should suit you perfectly! Kitted out with Delta's ALPHA line externals with the unique billet-style receiver and an SMR-style handguard up front, this M4 doesn't look like anything else out there, and the perks don't end there!

Inside, you'll find a 6.03mm tightbore measuring 380mm in length, a set of 18:1 ratio steel gears mounted on 8mm ball bearing bushings, an SHS piston with a full steel tooth rack and an SHS delayer chip and tappet plate to add reinforcement in the key places that need it.

The pre-installed EAGLE™ MOSFET allows you to program the trigger for semi-automatic only, burst mode, binary trigger, AUG mode and sniper delay. Coupled with its quick-change spring system, the TEMPEST 1 makes for a great DMR base gun thanks to its relatible easy conversion process. Whether you're looking for an all-rounder for both indoor and outdoor environments or you want to quickly switch between a DMR setup and standard AEG, the Delta Armory DA-A19-EGL ALPHA™ TEMPEST 1 M4/AR-15 AEG will be an asset to you!

If you're looking for an affordable MK18 MOD.1 platform for a build project or Milsim loadout, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG is one to watch. This variant of Delta's MK18 is a little different than the previous version, now equipped with a standard Milspec receiver shape and Crane stock with licenced trademarks from GrandPower Firearms. 

Inside, the DA-GP-B15 is equipped with the same internals as other BRAVO™ platforms, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell with a quick change spring guide. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost. 

Externally, the DA-GP-B15 build style follows the standard BRAVO format, with a CNC aluminium handguard, alloy outer barrel with a high density polymer receiver and buffer tube. This means it tips the scales at far less than a full metal MK18 but still has realistic weight distribution; perfect for those who want to mount the kitchen sink to their primary without compromising in-game agility. If you like the Milspec MK18 aesthetic but prefer to fight easy, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG should suit you perfectly!

If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!

This is the best GBBR on the market, no debate. The Tokyo Marui M4A1 CQB-R Block 1 has inspired plenty of other brands with its unique ZET system. This gas blowback system provides this replica with a thunderous recoil and an extremely realistic feel, any skirmisher will be impressed with this rifle, from mil-sim to casual players, this Tokyo Marui rifle is a lot of fun for anyone!

The great thing about Tokyo Marui platforms is that there is no struggle finding after-market parts, as many upgrade parts and replacement pieces are built to work for Tokyo Marui platforms, not that you will need many aftermarket parts because this CQB-R is built to perform well and last a long time. If you've been searching for that extra taste of realism from your Airsoft replicas, the Tokyo Marui CQB-R GBB Rifle Block 1 will certainly satisfy you!

An Airsoft 6mm BB Electric Powered AEG Gun, designed and based off the SIG 550, and was used by the Swiss Armed Forces. 

If you dream of a beastly DMR build but don't want the hassle of building one yourself, the Bolster Tuned EMG Daniel Defense M4A1 RIII™ DMR Upgraded AEG is your best option! Based on the already impressive EMG Daniel Defense M4A1 RIII™ 14.5" AEG but ram-packed full of upgrade parts and tuned to absolute perfection, the Bolster Tuned M4A1 RIII™ is locked to semi-automatic and hits out at an impressive 410 FPS with a 0.2g BB, ready for DMR duty!

On the outside, the EMG M4A1 RIII™ is practically the perfect DMR base gun, with enough length for the DMR look paired with a light and agile RIS III M-LOK handguard, ergonomic Daniel Defense Buttstock and gorgeous licenced Daniel Defense trademarks. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for upgraded builds with high performance parameters.

Inside, you'll find a Gate ASTER™ MOSFET paired with the Gate QUANTUM™ CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan and an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding and the strength to handle the high power main spring.

To get your BBs way out there and onto target, a Laylax/Prometheus Purple HOP-up bucking paired with a Maple Leaf OMEGA nub was installed, giving you impressive accuracy for a high first-round-hit probability. The Warhead 35K Base Brushless Motor paired with an SHS Motor Pinion Gear and a Laylax EG 18:1 Hard Gear Set provides the durability, torque and heat dissipation qualities for peak efficiency, shocking trigger response and a long lifespan of reliable performance.

With a scary-fast trigger response, exceptional range and the ability to hit small targets out to 60 meters and beyond, this isn't just a high FPS platform locked to semi; each and every Bolster Tuned M4A1 RIII™ DMR is hand-assembled, tuned to perfection and put through rigorous testing on our 65m range. If it doesn't meet the Bolster standard, it doesn't leave the workbench until it does!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you don't like to waste energy lugging a full metal platform around but want high performance, pre-upgraded internals, the Delta Armory CHARLIE™ ETU range was conceived with you in mind. This is the DA-C04-ETU M4/AR-15 KeyMod AEG, based externally on the original DA-C04 but kitted out internally with Delta's APLHA™ ETU internals. 

Inside, we are treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The Delta Armory programmable ETU/MOSFET system is also present, offering super snappy trigger response, improved rate of fire and the ability to program the fire controls for burst mode and binary trigger. Whether you're new to skirmishing and want a pre-upgraded platform that can tangle with the best, or you're a veteran who likes to fight easy, the DA-C04-ETU CHARLIE™ M4/AR-15 KeyMod AEG is the ideal addition to your Airsoft armoury!

If you like your M4 AEGs simple and effective, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is perfect for you! Based on the real steel M4A1 in the shorter CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle most long-range threats while not being too long that close-quarters combat becomes impossible.

 On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 base platform a slight facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics and a shorter barrel length, the Delta Armory DA-A01 ALPHA™ CQB-R M4/AR-15 AEG is the best choice!

If you're in search of an M-LOK-equipped AR AEG packed with pre-upgraded parts, the Delta Armory DA-B13-ETU BRAVO™ M4/AR-15 M-LOK AEG is one to watch. Like Delta's other BRAVO™ like offerings, the DA-B13-ETU boasts a CNC aluminium handguard and high density polymer receiver, giving you a great combination of realism and low weight. The handguard is rocking M-LOK slots at the 3, 6 & 9 o'clock positions and a 20mm Picatinny rail up top, ready for whatever accessories you need to complete your mission. 

Delta's ETU AEGs are even more upgraded than the standard BRAVO™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These pre-upgraded internals give the DA-B13-ETU a super snappy trigger response and raised rate of fire from the combination of improved efficiency via the ETU and faster mechanical cycling via the high-speed gearset. 

If you need a handy platform with beastly internals at the perfect length for aggressive, fast-moving playstyles, the DA-B13-ETU from Delta Armory will be an asset to your game!

If you're in search of a lightweight AR platform for outdoor skirmishes, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG is one to watch. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The DA-B14 is rocking a URX 3 style handguard, a super slim handguard designed for modern shooting stances with a full-length 20mm Picatinny rail up top and short lengths on the sides and bottom, giving you enough space for your mission essentials without making the front end too heavy and difficult to point. 

Inside, we are treated to the usual Delta Armory complement of pre-upgraded internals, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell, complete with quick change spring system. All internal parts are Tokyo Marui AEG spec, meaning you have access to an unrivalled aftermarket if you ever want to upgrade. If you like to move fast skirmishing in the great outdoors, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG will be an asset!

If you're in search of a lightweight AR platform for outdoor skirmishes, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG is one to watch. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The DA-B14 is rocking a URX 3 style handguard, a super slim handguard designed for modern shooting stances with a full-length 20mm Picatinny rail up top and short lengths on the sides and bottom, giving you enough space for your mission essentials without making the front end too heavy and difficult to point. 

Inside, we are treated to the usual Delta Armory complement of pre-upgraded internals, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell, complete with quick change spring system. All internal parts are Tokyo Marui AEG spec, meaning you have access to an unrivalled aftermarket if you ever want to upgrade. If you like to move fast skirmishing in the great outdoors, the Delta Armory DA-B14 BRAVO™ URX 3 12" M4/AR-15 AEG will be an asset!

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries. 

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you like the deadly, snub-nosed look of an integrally suppressed AR platform but want a shape less seen, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG should be right up your street. This is Delta's "Classic" version of the Silent Ops 7, boasting a CNC machined aluminium handguard with a wider-than-usual design to bring more realism to the sneaky beaky AR. 

The handguard is free-floated and includes a 20mm Picatinny rail extension at the top, designed to bridge the gap between the receiver and handguard rails for a more integral look and to allow for larger optical sights. If you ask us, this is how the original should have been, setting the Silent Ops apart from other similar integrally suppressed M4 AEGs. Inside the DA-B09, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, 6.03mm tightbore inner barrel, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

For stealthy skirmishers who want a more unique look, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG will give you exactly that. With pre-upgraded internals focussed on reliability and a unique front-end style to separate it from the masses, the Silent Ops Classic is a mean machine ready for any skirmish scenario you put it in!

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic. 

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic. 

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

Those looking for an affordable AEG they'll never need to upgrade, the Delta Armory DA-DIA-ARENA-A14 Diamond ALPHA™ 10" M-LOK M4/AR-15 AEG is exactly that! Building on the already very impressive Delta ETU series rocking ALPHA™ full metal externals, the Diamond 10" M-LOK M4/AR-15 is the top-of-the-line option from Delta, boasting a few internal changes from the original ETU version to refine 

The best parts of the ETU series are present in this Diamond AEG, including a reinforced gearbox shell, a programmable ETU/MOSFET system, a CNC aluminium cylinder head, CNC steel 16:1 gears and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response. 

The Diamond adds an AOE correcting rubber washer, a POM piston head made in the Czech Republic, an upgraded tappet plate spring, 8mm stainless steel ball-bearing bushings and the incredible Delta Armory Berserker Flat HOP-up kit, made by Psionics of Italy. The Berserker kit includes an enhanced HOP-up arm, flat nub and bucking optimised for maximum range, all made by HOP-up legends Psionics, true masters of the HOP-up game. 

The result is a Delta Armory AEG at the top of its game, running smooth as butter and reaching out to very impressive ranges. If you aren't the type of Airsofter to buy a gun and upgrade it over time, get stuck in with the DA-DIA-ARENA-A14 ALPHA™ Diamond 10" M-LOK M4/AR-15 AEG and you won't look back!

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.