All Electric Parts

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

If you want to transform your version 2 gearbox-equipped AEG into a true "smart gun", the Gate TITAN™ MOSFET V2; Expert Firmware will do exactly that. This advanced MOSFET/ETU system replaces the copper trigger contact inside the version 2 gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. 

The latest version of the TITAN™ V2 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay. 

If you have an AEG mega-build on your mind using a version 2 gearbox, add the Gate TITAN™ MOSFET V2; Expert Firmware to your parts list to take it to the next level!

The NanoAAB MOSFET from Gate Electronics is one of the smallest "plug 'n' play" MOSFETs with Active Braking on the market today.

If you are looking for a high end gearbox shell to start your ultimate AEG build, stop looking, you found the best there is! The Gate EON gearbox shell is CNC machined from 7075 aluminium for a strong and lightweight gearbox with a plethora of small enhancements that make this gearbox a dream to put together.

The cylinder window is radiused on all corners and the shell has some significant reinforcements at the front end, and along the top spine. The internal wire routing has been redesigned for ease of installation, and the shell is perforated with several inspection windows so you can set your angle of engagement, adjust your pre-cocking settings and shim your gears perfectly. Is this the ultimate Airsoft gearbox? Well, it will be, once you've built it!

Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space possible, and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C.

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

A complete unit to fit into any Airsoft AEG no matter what version gearbox you own. Included is everything from MOSFET to wiring, connectors and programming card.

Generation 3 Micro Computer Programmable Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. 

If you're running an AEG with a version 3 gearbox, the Gate TITAN™ MOSFET V3; Expert Firmware is what you need to turn your primary into a space gun! This advanced MOSFET/ETU system is the latest version of the original TITAN™, designed for version 3 gearboxes found in AK, AR36, AUG and SMG-5K AEGs, boasting a drop-in fit with the vast majority of V3 shells on the market. That said, the TITAN™ still requires knowledge of AEG internals, care and patience to install; as such, we only recommend this upgrade for those with a decent level of technical knowledge and confidence working on AEGs.

The latest version of the TITAN™ V3 includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

For those in the process of transforming their V3 gearbox-equipped AEG into an absolute beast, the Gate TITAN™ MOSFET V3; Expert Firmware is an essential addition to your shopping list. The TITAN™ extends the lifespan of your AEG by eliminating the cut-off lever and trigger contacts, along with offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options. If you want your AEG to perform at the top of its game, the TITAN™ is a big part of achieving that!

If you're done with AEGs and want to revamp your build for HPA, the GATE PULSAR D Dual Solenoid HPA Engine is a fantastic option. Designed for Version 2 AEG gearboxes, the PULSAR D is designed to work with a GATE TITAN™ II V2 ETU (HPA Version), giving you unlimited advanced programming options along with the bob on consistency, top-tier accuracy, killer rate of fire and wealth of tuning opportunities HPA builds are known to provide.

The set includes the complete engine but will require a V2 gearbox shell, V2 trigger and TITAN™ II ETU HPA Version to complete the build. When compared to the original and more affordable PULSAR S, the PULSAR D offers a higher FPS range, universal compatibility with AEG nozzles, less precision required in the assembly of the build and impressively high air efficiency, using only 0.7 PSI per shot on average at 90 PSI with a 0.8L air tank.

The PULSAR D also has the edge in accuracy and versatility over the simpler single solenoid PULSAR S, being suitable for any build objective, from CQB monster to DMR dominator. As with all internal upgrades, we only recommend this engine to those who are confident working on AEG and HPA internals, but if you're ready for the PULSAR D, you're sure to be impressed!

An ultra compact Generation 3 MOSFET built to be as compact as possible, requiring the smallest amount space possible, and is water resistant.

If you're fed up with your NGRS gearbox locking up when you slap out some double taps, the GATE TITAN™ V2 NGRS Rear Wired; Expert Firmware will cure it! This advanced MOSFET/ETU system replaces the copper trigger contact inside the standard NGRS V2 (aka Version 9) gearbox with optical sensors, eliminating the need for a cut-off lever, extending the lifespan of your AEG and offering unprecedented trigger sensitivity, fire mode and cycle control adjustment options.

The latest version of the TITAN™ V2 NGRS includes the Expert Firmware, meaning you have immediate access to the most advanced programming functions of the TITAN™ without needing to pay more to update the firmware. With the Gate USB-Link or Blulink, you can set your pre-cocking level for a speedy trigger response, adjust your trigger sensitivity, tune active braking and adjust the rate of fire for a truly custom setup that suits your playstyle perfectly. The usual programmable MOSFET functions of other ETUs are also present, including burst mode, binary trigger, semi-auto-only, ramping semi-auto, dual-stage trigger and sniper delay.

This is the Rear Wired version of the TITAN™ V2 NGRS, making it ideal for rear-wired M4, 416 and SCAR NGRS rifles. If you want to speed up your NGRS trigger, use LiPo batteries, run burst mode and protect its internals in the long run, the GATE TITAN™ V2 NGRS Rear Wired; Expert Firmware will give you what you need!

A drop in MOSFET Kit designed for Tokyo Marui NGRS Recoil Shock Systems, such as the NGRS M4, and the NGRS SCAR. This variation of the Kit comes with the MOSFET Unit, the USB-Link, and is the Advanced version with unlocked features.

A Generation 3 Micro Computer Controller Chip Set designed to add a huge variety of functionality to Airsoft AEG. The chip is built to be as compact as possible, requiring the smallest amount space and is specially coated to the Military Specification (Mil-Spec) MIL-V-173C. 

A heat-shrink kit designed to give you all the heat-shrink you'll need when working on a project gun or replacing wires. The heat-shrink is constructed from PVC, and shrinks in size when heated, designed to protect wires and other electrical components.

If you're after a high-performance build, then the GATE EON PROTECTOR Cylinder Head belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to seal the gap between the cylinder and head for maximum air retention and efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for an increased AEG lifespan. If you're upgrading your V2 or V3 gearbox or building a masterpiece from the ground up, the GATE EON PROTECTOR Cylinder Head is a superb choice!

A programming button designed to give you a bit more control of your GATE MOSFET, which is also compatible with other brands.

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

This set also includes the Gate QUANTUM CNC trigger which is compatible with M4/AR-15 AEGs but unfortunately won't work with SMG-5 or G3 platforms. When installed, the Quantum trigger offers 250 trigger sensitivity options via the ASTER's optical sensors. Constructed from CNC-machined aluminium, the Quantum both looks great and allows the ASTER™ to take full advantage of its optical trigger sensors.

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™

If you are looking for a high end gearbox shell to start your ultimate AEG build, stop looking, you found the best there is! The Gate EON gearbox shell is CNC machined from 7075 aluminium for a strong and lightweight gearbox with a plethora of small enhancements that make this gearbox a dream to put together.

The cylinder window is radiused on all corners and the shell has some significant reinforcements at the front end, and along the top spine. The internal wire routing has been redesigned for ease of installation, and the shell is perforated with several inspection windows so you can set your angle of engagement, adjust your pre-cocking settings and shim your gears perfectly. Is this the ultimate Airsoft gearbox? Well, it will be, once you've built it!

A drop in MOSFET Kit designed for Rear Wired Version 2 Gearbox, which are typically seen in M4 Variant Rifles. This variation of the Kit comes with the MOSFET Unit and the USB-Link. This light version of the kit does not include the tactical programming card.

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. 

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.

Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.

The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.

With mind-blowing optical trigger sensor, the TITAN II allows you  to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.

The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.

A drop in MOSFET Kit designed for Version 3 Gearbox, which are typically seen in AK and RPK Variant Rifles.

Building a beast of a gearbox? The Gate Protector CNC Aluminium Cylinder head guarantees a fantastic air seal thanks to its double o ring configuration. The Protector cylinder head is constructed from CNC machined aluminium and includes two rubber buffers of differing hardness, one of which can be installed on the rear of the cylinder head to reduce the impact force on the front of the gearbox shell and prolong its life. This cylinder head is best suited for standard builds or high performance DMR style builds and has super tight tolerances making fitting a breeze while reducing friction between parts which can result in premature failure.

If you are building up a DMR AEG you will want one of these inside! The Power CNC Aluminium Hybrid Piston head from Gate combines innovations from the AEG piston head market with those from Sniper rifles to allow the weight of the piston head to be adjusted to help reduce power loss when using heavy BBs (>0.3g). With the Hybrid Piston Head you have the choice; either install the piston head alone for improved air seal, longevity and reduced friction, or if you're building a DMR you can add the included weight pads to increase the weight of the piston, and reduce lost FPS when using BBs weighing over 0.3g. Perfect for a DMR build, but equally great in a standard AEG build, Gate has really broken the mould with this one!