Airsoft Clearance Sale

This Hard Case is constructed to an incredibly tough standard from Polypropylene (PP) + Glass Fibre Material, with reinforcement in all the right places to make it indestructible, but also so that it neatly stacks with other cases. A Rubber Seal around the edge protects the contents from Water up to 1m for 30 minutes, as well as from the ingress of Dust. The Case provides protection from Impact and Shock, Pressure changes and extreme temperatures, all thorough tested by a third party company, Intertek.

The Competition Recoil Buffer Module from CowCow is designed to shorten the travel of the slide of your pistol, increasing its cyclic rate. The set includes 8 recoil buffer pads of varying hardness which can be stacked in various combinations to fine tune your pistol for optimum speed.

If you have a younger sibling or child who wants to get into Airsoft but they aren't yet old enough for the real deal, this LPEG is ideal to help them learn the ropes! The Umarex H&K HK416 CQB Low Power Electric Gun is designed to cater to the younger market, offering a super lightweight electric powered Airsoft gun which runs at around half the muzzle energy of standard AEG, making it safer and less painful to get hit by but just as fun to use as the full-fat skirmishable models.

Compatibility-wise, this HK416 can accept standard Airsoft AEG magazines and 8.4V NiMh batteries with mini-Tamiya connectors, but both the externals and internals are proprietary and not compatible with standard AEG parts. The good news is that the 20mm Picatinny rails on the receiver and handguard can accept most Airsoft 20mm Picatinny accessories, meaning you can mount a red dot sight and a grip to give this low-cost, low-power, high-fun HK416 the elite look.

A Gas Blowback Pistol from NUPROL's RAVEN series which features a Pre-Two-Toned slide, integrated Red Dot Sight, Low-Light Ironsights, a Tactical Rail Slot and a Full-Auto 'Fun Switch' to scare the daylights out of your enemies!

If you love the comfort, reliability and compatibility of the G-Series pistols, and want something that is going to stand out from the crowd, then the EU18 is a sure choice. This pistol is perfect for all weather conditions and is one of the most cost effective sidearms you can run in Airsoft.

Based on the EU Series of pistols this replica is part of the VORSK EU range of pistols which are inspired by the finest and most advanced modern combat and competitive pistol designs. Built and designed with input from leading Airsoft players and manufacturers these pistols are the cream of the crop, and come in a multitude of designs with styles to suit every player's taste. This variation of the VORSK G-Series range is based on the G17 and features a vented slide, as well as being Pre-Two Tone Blue from the factory; meaning no waiting for paint to dry. It can dispatch immediately, and without a defence, provided they're available to buy.

If you are looking for something modern, compact and unique with which to turn and burn in CQB the SigAir MPX AEG would be a superb choice. This mould-breaking new SMG is a near-perfect replica of the real Sig MPX, the 9mm SMG offspring of the legendary MCX carbine. 

The SigAir MPX is built like a tank, sporting full metal construction and precision CNC machining across its externals and flawlessly realistic SIG trademarks, and is pre-wired with a basic MOSFET to keep its trigger contacts protected as you lay down rapid semi-auto shots in CQB, in the MPX’s natural habitat.

The Pangolin Hard Case is a seriously tough case with great dimensions that make it suitable for Laptops, Hard Drives, Drone Equipment or any other sensitive items that you want to be able to transport and store with the knowledge that they're completely safe from Water, Air Pressure, Shock/Impact and Extreme Temperatures.

A Gas Blowback Pistol from Raven which comes with a Red Dot Sight, raised low-light Ironsights, a Tactical Rail and includes parts to convert the pistol to CO2. If you're looking for a tactical pistol out of the box, this is the perfect bundle.

Calling all Hi-Capa fans! The RAVEN series are back, and this time with a revisit to the ever-popular Hi-Capa platform. The range offers a massive variety of colours, coupled with a strong recoil and smooth slide action for a grin-inducing shooting experience.

If you would appreciate the large gas reservoir of a Hi-Capa, but shiny race pistols aren't your style, the R504 may be what you have been searching for. The R504 sports Hi-Capa parts compatibility and a large magazine, coupled with aggressive military styling, suppressor height sights, a pre-installed thread adapter, and a Red dot sight mount plate included in the box.

If you need bigger mags on your AK, the Specna Arms S-Mag High-cap is a great shout. The S-Mag is constructed from high-density polymer with unique SA texture on the outside to add traction for improved wet weather handling. This is a wheel-wound high-cap magazine, meaning it holds an absolutely epic 430 BBs and needs to be wound periodically via the winding wheel on the baseplate.

To load the S-Mag High-cap, simply open the fill port on the top of the magazine and pour your BBs in. Once filled, wind the wheel on the baseplate 5-10 times, load it into your AK and get busy. This magazine is ideal for the Specna Arms J-series but should also fit in most other AK AEGs. 

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

This is for those of you looking for quicker reloads as well as making your Action Army Pistol look 'blinged out'. If you love your pistol and want to treat it to something special, this makes a nice addition to your mod. But how does it reduce reload speeds you ask? Well the magwell has been designed with a wide flare and bevelled inner surface to help guide your magazine into your pistol smoothly and instantaneously; "Eyes up" reloading will become second nature to you, perfect for competition shooting as well as skirmishing.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

A double magazine pouch designed to hold up to two M4 / M15 / M16 / STANAG / PMAG Magazine, and can be attached to MOLLE Compatible Rigs, Vests and Bags.

This style of magazine pouch is perfect for Airsoft skirmishers who are usually up close and personal, hiding in bushes, or for those who simply want a faster magazine reload time.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

If you need a seriously big and beefy Hard Case that is fully certified to protect your most sensitive equipment, then you're in the right place. The Schimitar Hard Case is a generously-sized solution to all things storage. With three thick layers of Pick and Pluck Foam inside, you can perfectly customise the Case to your needs, and with a tough Polypropylene (PP) and Glass Fibre mix with multiple Dual Movement Clasps and Padlock Holes, you can be sure that nothing from nature or humankind will be able to get inside without your saying so.

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

VORSK bring us another unique and cutting-edge entry in their line-up of ever popular pistols. Being a hybridised version of the iconic 1911 design, this pistol breaks the mould by taking Hi-Capa magazines, bringing this sidearm to new heights. The VX-14 features a tonne of ultra- modern design choices such as grippy V-textured side panels, cut slide grooves for ease of racking and a 20mm RIS pistol rail for aftermarket tactical devices to bring your competitive pistol shooting to a new level.

But the real trick the VX-14 has up its sleeve is the inclusion of a suppressor, as well as an inner barrel extension. The suppressor can be installed with or without the barrel extension, giving you a choice of FPS, depending on the conditions at hand.

A strong and durable heavy duty plastic hard case designed to protect valuable tactical equipment from damage or scratching during storage or transport too and from your Airsoft game site. This case has a wide variety of safety features made to ensure that even your most valuable Airsoft kit stay safe even during the toughest conditions.

The case is IP rated, and fully tested to give you the confidence you need to store your favourite bits of kit inside without worry. The case is waterproof, dust-proof, and shock proof, making it the perfect storage solution for anyone who wants to keep their valuables safe in a pinch.

The case is perfect for any kit you would use both on and off the Airsoft field, being the perfect size not only for sight, torch, PEQ box or attachment storage, but also for storing hard drives and other small electronics.

The No. 318 Scorpio Hard Case is a compact sized Hard Case made from Polypropylene (PP) + Glass Fibre Material, with a stackable design that makes them very convenient to store in bulk. Whether you need to carry delicate equipment on your person or you want to store them with the confidence that they're protected from the elements, with plenty of third-party certifications to back it up, then the PARRA series Hard Cases are just what you need.

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD-M is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

The Thompson M1A1 is a historic World War sub-machine gun, however, it mostly rose to fame in the darkened back alleys of a Mafia-run New York City and was catapulted into infamy as the go-to gun for gangsters and lawmen during the 1920s due to its large magazine capacity and high rate of fire.

The Snow Wolf Thompson M1A1 does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

Constructed from alloy, this is an Airsoft AEG replica of the OTs-03 SVU ‘Dragunov’ bullpup sniper rifle, the successor to the legendary 'Dragunov' SVD, first seen used by the Russian Federation in the First Chechen War.

A custom Airsoft 6mm BB Gun with a brand new slide and a unique lower frame, with tonnes of extra added features to greatly improve the pistol and increase the users effective capabilities.

Easily one of the most iconic sniper rifles to grace the field, now in a more compact 'short' size. With hefty full metal construction the EMG Barrett M82A1 is officially licenced by Barrett Firearms and has immaculately CNC engraved trademarks as we would expect from a rifle of this quality.

This version of the Barrett clocks in at a beastly 5.8KG, even at its somewhat shorter size, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 300FPS straight out of the box, with this variant being an AEG that does full auto! Meaning you can wield the .50 cal like a DMR and put those other snipers and marksmen firmly in their place!