Two-Tone Airsoft Submachine Guns

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

A high end SMG 45 at a great price. An absolute pleasure to hold in your hands and stands out by a mile from cheaper models by far.

An Airsoft electric powered 6mm SMG-5K replica with a full metal construction; the best friend to any close protection worker, movie bad guy, SAS operative or secret agent on skis!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market. 

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

If you are after a caveman simple WWII SMG and the STEN is a bit too unconventional, the M3A1 Grease Gun should suit you well! Derived from the STEN but with a vertically oriented magazine and tanker-style sliding stock, the M3A1 was the US Army's solution to the need for accelerated SMG production during the Second World War.

The Snow Wolf M3A1 is patterned after the original M3A1 Grease Gun, the second Grease Gun variant which saw the ratchet style charging handle deleted. In Airsoft terms, this means the Snow Wolf M3A1 is realistically limited to full automatic only, with the dust cover functioning as a safety catch, just like the real thing. The Snow Wolf M3A1 has a very realistic weight and feel thanks to its majority steel full metal construction and gun metal grey finish. If you love a simple classic the Grease Gun has your name on it!

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals. 

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic. 

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

If you're looking for a lightweight beginner platform and you like sneaky SMGs, this is the one to go for! The Golden Eagle SMG-5 SD6 AEG Submachine Gun Replica is styled after an iconic SMG design we all know and love, constructed from high density polymer so you can run around all day without feeling the burn.

While it may be cheap, the Golden Eagle SMG-5 SD6 doesn't compromise on build quality, being constructed from strong high-density polymer with a matt finish indicative of fibre reinforcement with an aluminium suppressor at the front. Inside, you will find an alloy version 2 gearbox with full Tokyo Marui compatibility, boasting 7mm ball-bearing bushings for a smoother gearbox sound. A 6.03mm tightbore inner barrel is also present, a nice bonus to squeeze a bit more accuracy and FPS out of the platform. If you want a suppressed subgun to match your sneaky playstyle, the Golden Eagle SMG-5 SD6 fits the bill but won't break the bank!

King Arms have a new offering for the PDW crowd, the SBR SD, which is a modern 9mm compact with a railed handguard, ergonomic controls and included suppressor.

The JG M5 SD5 is an integrally suppressed SMG-5 AEG featuring a polymer body and full sized battery stock. A very popular style of Airsoft rifle due to its widespread use by sneaky types of many militaries, great for some discrete CQB kills! 

Based off the real world M3 / M3A1 Submachine gun, also known as the 'Grease Gun', this is a high quality replica of an iconic historical weapon.

If you want some jarring recoil in your life for a more realistic firing experience, a GBBR is the way to go! The WE Apache A5 is a great replica of the iconic SMG-5, boasting majority steel construction, a 3-round burst function and ambidextrous controls, matching the "Navy" version of the SMG-5 perfectly.

Far more exciting than that is how this SMG feels when fired, the recoil is strong and the bolt speed is very impressive, and the SMG stops firing when empty with a dead man's click to usher in a reload. The steel receiver, realistic size of the trigger pack, 30-round real-cap magazine and realistic manual of arms make this the ultimate SMG-5 for Milsim, or for more serious collectors. If there is an SMG-5 GBBR shaped hole in your soul, this should sort that right out!

The King Arms 9mm SBR AEG is based on recent developments in the world of pistol calibre carbines and SMGs in the firearms world, hybridizing the ergonomics and modularity of the M4/AR15 platform with the more compact magazines of 9mm SMG platforms.

The 9mm SBR feeds from MP5/SMG-5 AEG magazines and follows the M4/AR15 in the layout of its controls, giving AR users the option to run an SMG which is very similar to their assault rifle, meaning less training to master the new platform and less chance of "training scars" causing confusion mid firefight. If you are stuck for choice between an M4 AEG and an SMG-5, why not get both in one?

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

The insanely iconic SMG-5K, popularised by movies as being every bad guys SMG of choice. This replica has an Alloy body to bring it to a realistic weight, and features a folding stock to make it more useful both indoors and outdoors.

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!

Offering you the best of both worlds, the SRC SR4 ST Falcon-ZS lets you choose between using AR9 and STANAG magazines by using the handy included receiver adaptor. It's lightweight and compact design make the Falcon perfect for run and gun CQB playstyles.

With an integrated suppressor and PDW stock for that operator style, the Falcon boasts a wealth of other features such as MLOK front handguard, 20mm top rail and flip up ironsights, 280 round 9mm magazine as well as removable magwell grip the Flacon has a lot to love in a compact package.

If you are up-to-date on your Russian firearms, the PPK-20 must have caught your eye! The latest iteration of the PP-19 Vityaz platform, the PPK-20 further modernises the AK-style SMG with an adjustable side folding stock, the AK-12 pistol grip and a compact suppressor. This, the ARCTURUS AEG replica is a limited run of only 500 pieces worldwide, so if you want one don't hesitate!

Your lack of hesitation will be rewarded when you get the PPK-20 in your hands. This beast is constructed almost entirely from steel, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves. On the inside, things are equally special as the PPK-20 is rocking a Perun Optical MOSFET, high torque motor, a plethora of reinforced internal components backed up by a new rotary TDC style HOP-up unit and a 6.01mm stainless steel tightbore inner barrel. If you are an AK kinda guy and you appreciate a fully upgraded platform with perfect realism, the PPK-20 will definitely put a smile on your face!

An absolutely stunning and realistic replica of the M3A1 Grease Gun, an updated version of the original Grease Gun used during WWII. This Airsoft Electric Gun features Steel construction and an Electronic Trigger for a fantastic shooting experience that will put a smile on your face! If you're looking for realism and fun, you've come to the right place.

The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.

The Sterling MK5 (L34A1) is a later adaptation of the Sterling Submachine Gun, that was issued to small patrols for covert engagement and ambushes. This Electric-Powered Airsoft Replica of the Gun is constructed from Steel and Real Wood for an incredibly realistic experience, and features an externally-accessible Rotary HOP Unit for excellent lift on your BBs and easy adjustment.

The Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU is a perfect compact CQB SMG. With the addition of the Kestrel V2 ETU, this SMG means serious business! Its lightweight polymer construction is sure to withstand scratches and bumps and the side folding skeletonised stock allows you to turn this SMG into a single-handed machine pistol, not the traditional shooting stance but it works!

Inside the Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU, we are treated to some reliable straight-out-of-the-box internals. Featuring the star of the show, the Kestrel V2 programmable ETU, paired with 18:1 ratio steel gears which run on 8mm ball-bearing bushings. Also inside is a 6.04mm inner barrel paired with a rotary HOP-up unit, getting you off the mark with some fine accuracy potential.

The CYMA CM.041SD6 High-Speed is an SMG-5 Platform Airsoft Electric Gun, which has been upgraded internally to provide an awesome Rate of Fire. A reinforced Version 2 Gearbox awaits inside, with goodies such as Steel Gears, Steel Rack Piston and other anodised CNC internals, to create an SMG-5 that performs like no other.

If CQB is your poison, or you have limited space in your kit bag, you are going to love this one! The CM.106 AR-9 PDW from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106 PDW sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you're put off full metal SMG-5s because of their immense weight, this high density polymer alternative should suit you perfectly! The Jing Gong SMG-5 A5 RAS replicates the iconic SMG design in its RAS configuration, with 20mm Picatinny rails at 3, 6 and 9 o'clock on the handguard, ready for your mission essential accessories. Up front, we have a QD flash hider mounted to a threaded tri-lug muzzle device, giving you loads of tracer and suppressor mounting options straight out of the box.

On the inside, the G.E SMG-5 is modestly equipped but surprisingly potent for the price. The internals are based around the Tokyo Marui SMG-5, meaning a version 2 gearbox, slider adjustable HOP-up unit and full compatibility with aftermarket TM spec upgrade parts. Improving on the original TM design, Jing Gong has added 7mm ball bearing bushings into the mix for reduced friction, increased rate of fire and a smoother gearbox report. Another nice little sweetener is the platform's 6.03mm tightbore inner barrel which raises FPS and improves accuracy, saving you a few quid when it comes time to upgrade!

If you have caught AR-9 fever (it's contagious!) but you want something realistic, and ultra-compact, EMG has something for you to take a look at! The Angstadt Arms SCW-9 is a modern AR-9 platform designed to be as compact as physically possible for concealability when used by close protection details and bodyguards and fortunately for us, this translates directly into a seriously competitive CQB platform that is probably the most compact option on the market right now. 

This pocket-sized M4/AR15-derived submachine gun features full metal construction, a female threaded outer barrel complete with14mm CCW male thread adapter and an in-line MOSFET which pairs well with the microswitch trigger to provide a snappy response for some rapid double taps in CQB. All of the controls are either ambidextrous or extended, making for a familiar but enhanced feel for M4 users, and its innovative compact PDW stock makes this tiny boi barely bigger than a pistol. If you want the edge when it comes to challenging CQB scenarios, the SCW-9 would be a great choice!

The UMG models are great, but wouldn't it be great if we just had something a little more modern? Introducing the G&G PCC45, the 21st Century rendition of the very tired UMG style platform.