Laylax

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

If you seek more accuracy and range from your AEG, the Prometheus Bridge HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, these are the "Bridge" style design with a central groove designed to reduce side-to-side deviation, focussing on maximum accuracy and providing the smallest grouping possible. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs. 

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

If you are looking to further extend your advantage and push your AEG to the limits reinforced gears are a must for long term reliability under increased stress. This Laylax EG Hard Gear Set is specifically designed for Airsoft AEGs with a version 2 or version 3 gearbox, or compatibility with v2/3 gearsets and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a high speed set with a ratio of 16:1, intended to provide a slight speed increase with the same motor compared to the standard 18:1 gears in most AEGs.

If you have had a mishap when exploring your gearbox internals and the trigger spring has gone walkies, Laylax have your back with its Lightweight Trigger Spring Set. This set provides 2 trigger springs constructed from spring steel with a lighter pull than the original trigger spring, allowing for faster semi-auto spam. The springs are compatible with AEGs which use the Version 2 gearbox, including M4/AR15s, G3 and SMG-5 AEGs.

If you're working on a high-speed AEG build, the Prometheus High Speed Motor with Hard Pinion Gear will give you the speed you need! This long shaft motor is compatible with M4/AR-15, SMG-5, G3 and P90 AEGs, offering an improved rate of fire, reliability and strength thanks to its pre-installed hardened steel pinion gear. 

The set includes the motor itself, the hardened steel pinion gear, a pinion spring and a polymer storage box so you can keep the motor clean and dust-free prior to installation. The motor spade connectors are also pre-wired in for easy installation, though the motor height will need adjustment manually once the motor is installed. 

Laylax/Prometheus is one of the most trusted names in the Airsoft industry when it comes to upgrade parts, with decades of experience and a great reputation with Airsoft techs. If a high-speed motor is on your shopping list, the Prometheus High Speed Motor with Hard Pinion Gear is a fantastic choice!

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to Picatinny rail systems, locking with a grub screw on the top. These are much like standard rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you are rocking the Sig Air MPX and you are worried your battery will poke out of the handguard, worry no longer, Laylax have an innovative solution! The Handguard Battery Block for MPX AEG is designed to mount to the outer barrel using a grub screw and close the front end of the handguard up to stop your battery from hanging out when the SMG is pointed down. The block is constructed from aluminium with a matt black anodised finish and is styled to look like the gas block of the bigger MCX, meaning it shouldn't detract too much from the realistic looks of the MPX. This is why we love Laylax, they always come up with a nifty solution for these little niggles!

For the smoothest and strongest bolt pull for your Tokyo Marui, CYMA or JG VSR-10 Pro and G-Spec sniper rifles. 

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This 'Block Hider' fits to your outer barrel, just like standard flash hiders - using a 14mm CCW thread, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your AEG running for longer at high speed thanks to its reinforced polymer construction. 

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

For those of you looking to bling out your Hi-capa, you've certainly found the right page! Designed for use with your 5.1 gas blowback Hi-capa, this replacement part will extend the receiver and rail from 5.1 to 7 inch, much like the mighty Hi-capa Dragon!

Constructed from anodised alloy, the frame has a low weight and a sleek, stylish aesthetic. Completing the look is the front compensator, available in your choice of 3 metallic colours. But it's not just about looks, as it will extend the lower rail to allow for 4.5 inches of real estate to mount the tactical devices of your choosing.

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

Instantly boost the ergonomics of your ARP9 with this simple, yet effective magazine catch. The widened magazine catch retains the ambidextrous nature of the original catch while making it easier to manipulate as well as operable with your index finger. Allows for drop free reloads just using your trigger finger from your firing grip.

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

If you want to shorten your MCX down a bit or you are going for a slick integrally suppressed look for your next build this outer barrel from Laylax is just what you need. This barrel is 6.5 inches (17cm) in overall length and is constructed from aluminium for a perfect balance between low weight and strength.

At the tip of the barrel, we are treated to 14mm CCW male threading, allowing you to equip your MCX with a suppressor for sneaky duties. The tip of the barrel is wide enough to allow an inner barrel to pass straight through, meaning no need to mod it if you want to keep the original MCX inner barrel length. If installed on a standard MCX the barrel will be entirely beneath the handguard, allowing you to mount a tracer unit or suppressor without increasing the overall length of your setup and give your rifle the "Honey Badger" look. If you are adding a tracer make sure you get a shorter inner barrel as well!

Calling all master builders! Now you can customise to your hearts content using your favourite brick system. With LayLax Block interfaced parts, you can bring the modularity of your gun to new levels, whether it be pirate themed, castle themed, space themed or whatever your favourite set was from your childhood.

This variant fits to M-LOK rail systems, much in the same way you would fit standard M-LOK rail covers, only this time they're a lot more jazzy and colourful and the cinematic adaptation is voiced by Chris Pratt.