Airsoft Stocks

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.

If you're checking out alternative stock options for your M4/AR-15 AEG, the Delta Armory M4/AR-15 Battery Stock & Buffer Tube Set should be on your radar. This stock is the same offered on Krytac Trident and Delta Armory AEGs, boasting QD sling sockets on each side, a conventional sling loop in the centre and a comfortable and grippy rubber butt plate for traction in all weather conditions. 

Like the "Crane" stock, the Delta Armory battery stock has a comfortable sloped cheekpiece, but unlike the Crane, the Delta stock has texture along the top for comfort and grip, encouraging a consistent head position when shooting. The highlight of this stock design is its enlarged battery compartment, offering longer battery tubes than the Crane and more space around the sides, allowing for larger LiPo batteries to be installed. If you want a longer-lasting battery and your AR AEG has a buffer tube, this is the stock for you!

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A Polymer constructed stock which is tough, made from dense materials and is reminiscent of the Amoeba stock due to the easy access spring-loaded door which gives access to the battery compartment.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

An Arm Brace / Stabilizing Stock for AR platforms, which originated as a way around certain US Firearms Laws, but is actually very useful for those with limited mobility. The brace will wrap and secure around your forearm, helping stabilize the replica without having to put the "stock" to your shoulder, or even admitting out loud that it is a "stock" at all.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

If you are looking for a new stock, but it needs to be able to house a battery, you are in luck! The Krytac M4/AR15 Battery stock is constructed from high-density polymer with a steel adjustment pin and steel QD sling points on either side. Perfect for those who are bored with the super common crane stock look!

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

If you're running an MPX, MCX or 1913/20mm stock interface-equipped platform and want a shorter length of pull for CQB, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock is what you need. This CNC Aluminium stock boasts a skeletonised design to maintain the perfect combination of low weight and strength and is shorter than most 1913/20mm stocks, ideal for use with bulky body armour vests and plate carriers.

Built into the design of the Shorty stock, we have a pair of QD sling sockets, one on either side, ready for QD sling swivels to be added. The butt plate is serrated and made from grippy rubber, ensuring the handling of your platform stays top-tier, even in wet weather conditions.

Compatibility-wise, this stock fits SigAir MPX and MCX platforms and will also be compatible with aftermarket 1913/20mm Picatinny adapters for M4/AR-15, SCAR, AK, SMG-5, EVO, MP9 and more. If you need a stubby stock for close-quarters encounters, the Airsoft Artisan 1913/20mm Picatinny Shorty Stock for MPX/MCX/1913 Interface is the perfect tool for the job!

An Airsoft replica of the classic M16 style fixed solid stock, designed for use on Airsoft 6mm BB replica M4s, M15s and M16 AEGs. Just like the real stock this replica is based on, the CYMA stock is constructed from dense polymer to create a lightweight and rugged firing platform.

A multi-position Sliding Stock for AEG Buffer Tubes, that is designed to look like the Stock that comes supplied on the AK-12 and AK-15 rifles. It is constructed from a tough Polymer and is easily installed by squeezing the Stock Adjustment Lever and sliding it over the Buffer Tube. There is a QD Sling Socket on either side of the Stock for the connection of a Quick Release Sling Loop, and a thick Rubber Butt Pad provides grip and comfort in the shoulder.

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Minimalist Folding Stock is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium to reduce weight when compared to 90% of other stock setups around, and the stock folding and mounting mechanism is constructed from steel for extra strength. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing a low profile stock option with QD sling sockets in either side and a textured rubber butt plate for added grip.

This slim profile Stock is designed for AR / M4 platform Airsoft Electric Guns, and will attach to any kind of AEG Buffer Tube. There is no dedicated Battery Compartment on this Stock, so you will need to fit your Battery inside the Buffer Tube of your gun. The Rubber Butt Pad is removable to make Battery installation easier; simply pull back the tiny tab on the underside and pull the Pad downwards.

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

If you want a new look for your M4/AR-15 AEG a new stock is probably the easiest way to do it! The VLTR Style Clubfoot IMOD stock from CYMA is an enhanced stock design with a Crane stock sized battery compartment built in and aluminium QD sling sockets on either side. The set includes the IMOD stock, a 6-position M4/AR-15 buffer tube and the mounting bolt and spacer so you can fit the stock as an alternative to fixed stocks and PDW stocks. This is why they call the M4 platform "Barbie for men"!

Is your AR stock too long? Maybe you carry a PDW AR15 AEG as a secondary but don't fancy the additional weight of a PDW sliding stock? The CYMA ultra-compact M4 stock may well be what you have been searching for.

This fits on a normal AR15 buffer tube but is optimized for use with a shortened buffer tube, making it even more compact. The butt plate can be removed similarly to a full-sized crane stock if you have a small enough battery to fit inside this lil' guy! This would also work well with a battery sling.

Here we have a stronger, or even replacement lock hook for the KRISS Vector's folding stock. if you want to get ahead of any potential stock lock failure in the future or you're simply the type of rough and ready player that plays hard with your RIF, this would be a worthwhile upgrade for you.

Constructed from duralumin, a strong, lightweight aluminium alloy, which can endure even the most rigorous shooting and movement for performance and peace of mind.

If you're looking to upgrade your Dragunov's stock, look no further. Here we have the latest version of the Russian SVD Dragunov stock by CYMA, specifically for the CM.057. Made of high density, tough polymer, it is a complete pistol grip / stock unit. The stock features an adjustable cheek rest for precise shooting and to increase the comfort of the user, to help you get those long range shots with ease.

A spare or replacement Butt Pad/Plate for CYMA branded AK replicas. This is ideally useful for Rear-Wired models where the Battery is stored in the Stock and needs to stay locked in place. Whether you need a spare yet or not, this is an essential bit of kit for any AK owner with a Solid Stock.

The Novritsch SSG10 A2 Stock will completely transform your SSG10 or VSR 10 sniper rifle. The stock and chassis have plentiful features that will elevate your gameplay both in terms of ergonomics and aesthetics. It fits the SSG10 A1 receiver without and adjustments need to be made. It also fits other VSR-10 platforms but requires you to remove the hop-up block plate from your VSR-10 rifle first before installing the stock.

You will need to manually install this part, only those who are absolutely confident in their abilities should attempt to install this stock. 

Uplift your sniper rifle and give it a realistic and comfortable feel with this SSG10 A2 Stock, being a sneaky sniper has never been more appealing!

A seriously tough Stock for Airsoft AR/M4/M16 replicas, which attaches to an AEG Buffer Tube and features an adjustable Cheek Rest, QD Sling Sockets and removable Butt Pad w/ secret storage area.