All External Airsoft Parts & Attachments

An Alloy suppressor, designed to fit both Airsoft Sniper Rifles and Standard Airsoft AEG that uses a 14mm CCW outer barrel end.

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

If your Delta Armory AEG has run into some issues relating to its charging handle, do not fear, we have just the thing for you! The Delta Armory M4/AR15 AEG Extended Charging is constructed from alloy and features a steel spring for extra durability. This is an original replacement piece for your Delta Armory platform and features an extended handle design so you can better grip it when the time comes to adjust your Hop-Up unit.

If you need to fix up your old Airsoft AEGs with charging handle issues, you need the Delta Armory M4/AR15 AEG Extended Charging Handle, get your AEGs back in skirmishing condition, it's what they deserve.

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 30mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard Picatinny rail sections, often found atop your Airsoft platform. To secure your rifle scope, you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you're in need of an RMR mounting plate for your Army Armament STACCATO pistol, then you've come to the right place! This plate is the perfect accessory for those wanting to mount a red dot sight to their pistol for some extra accuracy whilst out on the battlefield. It is constructed from aluminium and comes with the necessary steel mounting screws to attach this plate to your pistol.

It is compatible with red dot sights that have an RMR footprint, such as the PCS Miniature Red Dot Reflex Sight. If you're looking for a replacement RMR plate, or you need one to mount your desired red dot, the Army Armament Staccato RMR Mounting Plate is perfect for you.

Have you been looking for a tactical muzzle attachment for your AK platform? Well, if so, you are in luck! The 5KU DTKP Airsoft Silencer for AK Platforms is an amazing choice. It comes with a choice of 14mm or 24mm threading, meaning it will fit most common AK Airsoft rifles on the market. It is constructed from aluminium, giving it durability but also maintaining a lightweight so you can still sweep your rifle around the battlefield with ease.

It features a Hexagon Type 2 style design, adding a dynamic style to the front of your rifle. Although it is designed for AK platforms, this muzzle device will spice up any Airsoft platform it's attached to!

Have you been looking for a tactical muzzle attachment for your AK platform? Well, if so, you are in luck! The 5KU DTKP Airsoft Silencer for AK Platforms is an amazing choice. It comes with a choice of 14mm or 24mm threading, meaning it will fit most common AK Airsoft rifles on the market. It is constructed from aluminium, giving it durability but also maintaining a lightweight so you can still sweep your rifle around the battlefield with ease.

It features a Hexagon Type 2 style design, adding a dynamic style to the front of your rifle. Although it is designed for AK platforms, this muzzle device will spice up any Airsoft platform it's attached to!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Riser Mount for Red Dot Sights will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a steel mounting bolt to secure it to your Airsoft platform's rail.

Constructed from CNC machined aluminium with a steel mounting bolt, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the Novritsch High Riser Mount for Red Dot Sights is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Riser Mount for Red Dot Sights will let you get on target without straining your neck

If your mock bolt has become damaged or the paint has started to wear off, you should get a new one! The Delta Armory Metal Mock Bolt For M4/AR-15 AEG is a replacement piece constructed from steel. It will fit on most common Airsoft M4/AR-15 AEGs, allowing you to smarten up your rifle receivers with brand-new shiny parts.

Don't let your mock bolt ruin your AEG's pristine aesthetic, get the Delta Armory Metal Mock Bolt For M4/AR-15 AEG so it can be shiny and brand new again!

If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.

Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!

If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.

Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs with a polymer receiver but should also fit most other brands, such as Specna Arms, Lancer Tactical and Evolution. The pin slides straight into your receiver and may require some force to ensure it is tightly secured.

Keep your assault rifle in one piece with a replacement Delta Armory Steel Front Body Pin For M4/AR-15 AEGs, nobody wants their receiver to fall to bits out on the battlefield!

If you're running a KeyMod handguard but want to use 20mm Picatinny accessories, these are what you need! The ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 is constructed from alloy, including 2 short 5-slot rails and one 9-slot rail and the screws you'll need to mount them. 

As with other KeyMod accessories, these rails can be positioned wherever you need them and are compatible with metal KeyMod handguards but won't fit polymer mock-KeyMod handguards. If your favourite vertical grip only comes in 20mm Picatinny flavour or you want to mount a flashlight or PEQ laser to the side of your KeyMod handguard, the ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 will sort you out!

If you want a more aggressive look for your PTS Sandman suppressor, the PTS Syndicate Dead Air R-Series Flash Hider Front Cap for Sandman Suppressors will give you what you need. This front cap replaces the original cap on any of PTS's Dead Air Sandman suppressors with a fantastic replica of the real steel Dead Air Flash Hider Front Cap. In real steel terms, this reduces muzzle flash signature but in Airsoft terms, it's only for the look!

If you want to take full advantage of the incredible long-range performance of your Novritsch SSX23, the Novritsch 20mm Picatinny Slide Rail for SSX23 NBB will help! This aluminium 20mm Picatinny rail mount fits directly to the SSX23 slide, packaged with the correct screws to get it mounted straight away. This means you can fit a compact red dot sight to your SSX23, increasing long-range accuracy and target acquisition speed by removing the need to properly align the fibre optic sights. 

While you might not use them often with your red dot sight mounted, the fibre optic sights of the SSX23 are not obstructed when the rail is installed, meaning if your red dot battery runs out mid-firefight you can still land hits with ease!

If you're looking for a unique muzzle device to top off your build, check this out! The ASG Flash Hider for EVO Carbine; 14mm CCW is constructed from aluminium and has a unique, slanted design with aggressive ports on each side. 

While it is designed for the ASG CZ Scorpion EVO 3 A1 it can be mounted on anything with a 14mm CCW male threaded barrel, so go wild!

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. It is constructed from polymer with a rubberised butt plate. The stock features a rear battery compartment which is accessible when the butt plate is removed which allows the fitting of a Nunchuck configuration battery, such as this.

The stock features rear loopholes for two-point sling setups, as well as a rubberised butt plate for enhanced hold when shouldering your weapon. To fit the stock the pin which is below the adjustment handle should be pulled fully out, then the stock will simply slide onto the buffer tube, this can be done either by Hand or with a pair of Pliers. The stock is a great replacement part for M4 Airsoft rifle project builds or simply as a replacement for an already damaged part.

If you're in search of a beastly muzzle brake to finish off your build, the PTS Syndicate Dead Air KeyMo Muzzle Brake is a fantastic choice. Offering official licencing from Dead Air Silencers and steel construction, this muzzle brake adds an aggressive edge to whatever platform it is mounted on, along with compatibility with the PTS Dead Air Sandman series of QD suppressors.

Designed to mount to any 14mm CCW male threaded outer barrel, the KeyMo Muzzle Brake is what you need if you're running a PTS Dead Air KeyMo suppressor and prefer the mean looks of a muzzle brake over the tri-prong flash hider supplied with the Sandman series!

If you're looking for a unique stock for your M4/AR-15 setup, the ASG HERA ARMS CCS Retractable Stock for M4/AR-15 is exactly that. The CCS stock is a genuine real steel stock made by HERA ARMS GMBH in Germany, flawlessly built with fantastic quality glass-fibre reinforced polymer and making use of unique low-profile adjustment buttons on either side of the stock. This eliminates any chance of inadvertent mid-skirmish adjustments in a unique way, keeping the controls accessible while maintaining a snag-free shape. 

Compatibility-wise, this stock should fit most Airsoft M4/AR-15 AEG buffer tubes, being designed for real steel Milspec AR-15 buffer tubes. With a comfortable and grippy rubber butt plate, steel QD sling sockets on each side and an organic, low-drag shape, the CCS stock both looks fantastic and works like a charm!

If you're looking for a stylish muzzle device which can mount to multiple platforms, the PTS Syndicate Griffin Armament® QD Blast Shield Gen 2 should suit! This Blast Shield is made from CNC machined 6061 aluminium and is licenced by Griffin Armament®, meaning flawless dimensional accuracy and full compatibility with PTS's range of Griffin Armament M4SD muzzle devices.

One of the neat tricks the QD Blast Shield has up its sleeve is the ability to mount to most A2 birdcage style flash hiders, meaning if you don't have a PTS Griffin Armament flash hider there is a high likelihood this will fit your original flash hider. Please note, as tolerances can differ between manufacturers, we cannot guarantee compatibility with all A2 birdcage flash hiders. 

The QD Blast Shield mounts via its Gate-LOK™ QD mechanism, requiring the circular leaf spring at the base of the suppressor to be pulled away from the collar and the QD mech lifted up and out of the device, allowing it to slip over your flash hider and be locked into place. We suggest proceeding with care when installing this device on non-PTS Griffin muzzle devices as you may damage its flawless finish! 

If you need an ultra-modern QD suppressor and flash hider for your long gun, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit should suit your needs! This is the taper mount version, pre-fitted with an extended collar which allows for quick attachment and removal via the included steel tri-prong flash hider. The flash hider mounts to 14mm CCW male barrel threads, making it suitable for almost every Airsoft AEG or GBBR. 

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement. 

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health. 

Other than its easy and quick removal, the advantage of the Taper Mount Kit is its ability to be converted into a Blast Shield using the included threaded ring. Simply unscrew the front of the suppressor body and replace it with the ring and you've got yourself a Griffin Taper Mount Minimalist Blast Shield! If you're looking for a slick modular muzzle device to finish off your rifle build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Taper Mount Kit is a fine choice!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The LCT AK Fire Selector is constructed from stamped steel and is a modernised design with a ledge that can be used to select fire modes from a firing grip. With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger.

This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. It doesn't come with any fittings and is only the fire selector. A perfect item for any Tactical AK or custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use. Not to mention, it will give the iconic fire selector scratch mark on your receiver!

Please note this is only the selector and does not include the necessary fittings for installation.

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you're looking for an M-LOK QD sling socket which is ergonomically designed and won't contort your sling, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice. Designed as an alternative to built-in QD sling sockets and standard flat sockets, when installed, this socket faces the shooter, resulting in a more comfortable sling position and less chance of tangles.

Constructed from high-density polymer with a steel QD cup, this socket should be compatible with most QD sling swivels on the market, allowing you to install or disconnect your sling quickly. Due to differences in tolerance between manufacturers, we suggest thoroughly testing this socket before entrusting it with any weight unless you're using it with a PTS-branded QD swivel. If you find the built-in QD sockets on your handguard are positioned suboptimally or don't have any QD sockets on your M-LOK handguard, the PTS Syndicate EP M-LOK QD Sling Mount is a fantastic choice!

If you fancy the sneaky look for your Airsoft rifle, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor is what you need! A flawlessly machined and officially licenced replica of the real steel Griffin GP5™ (General Purpose Mod.5), this suppressor mounts directly to 14mm CCW male barrel threads, saving you a fair bit of weight when compared to QD suppressors to keep the front end of your primary lightweight and easy to point. 

The body of the GP5™ is flawlessly machined and dead on accurate to the real thing, even down to the discretely engravedlicenced Griffin Armament trademarks. The only deviation is the inclusion of the PTS logo and "For Airsoft Use Only", though these markings are very discrete and hard to find if you aren't looking for them!

The GP5™ is available in Non-Tracer and Tracer forms, with the latter including a pre-installed tracer module instead of the mock baffles inside. The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. The charging cable is NOT included so make sure you've got one ready. As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health.

If you're into the finer things in life and need a suppressor to top off your build, the PTS Syndicate Griffin Armament® GP5™ Direct Thread Suppressor will do the trick. Providing the elite, realistic look a professional build needs with far less added weight than most comparable suppressors, the GP5™ looks fantastic and won't slow you down!

If you need a lightweight suppressor or tracer unit with licenced trademarks to complete your build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit is a fantastic choice. This is the direct thread version, pre-fitted with a 14mm CCW male thread insert for most Airsoft AEG/GBBR platforms and packaged with an 18mm CCW male thread insert for more unconventional platforms. 

The Resistance 22M is available in either Tracer or Non-Tracer versions, both of which use the same flawlessly machined 6061 aluminium alloy body. Licenced Griffin Armament® trademarks are present on the suppressor body and are immaculately laser engraved, only differing from the real thing slightly due to the terms of PTS's licence agreement. 

The tracer version includes a pre-installed tracer module which is accessible by unscrewing the front cap of the suppressor. Inside, you'll find the USB Type-C charging port on the front of the module and the activation button on the rear. A USB Type-C cable is also included in the set, just in case you don't have loads lying around already! As with all tracer units with internal rechargeable batteries, we recommend recharging the unit every 2 months regardless of usage to maintain battery health. 

One of the main perks of the Direct Thread mounted version of the Resistance 22M is its low weight, tipping the scales at under 160g for the tracer version. Coupled with its short overall length, this means you can rock the sneaky look without making your primary overly front-heavy or unwieldy. If you like your licenced goodies and need a sleek suppressor to finish off your latest build, the PTS Syndicate Griffin Armament® Resistance 22M Suppressor; Direct Thread Kit should keep you happy!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!