Novritsch Tactical Gear

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you are looking for some super slick magazine pouches with a unique modern twist, Novritsch is the way to go! This mag pouch is designed for EVO/SMG-5 magazines and has a very good retention system, due to the polymer inserts, that grips the magazine securely when you're not trying to take it out. 

The pouch consists of a fabric outer cover in a camouflage/colour pattern of your choice with a polymer inner retainer that helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser-cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you're all ghillied up but don't have a hood, grab the Novritsch 3D Ghillie Suit - Hood for the floating gun/walking bush effect! This ghillie suit hood is designed to be worn with the Novritsch 3D Ghillie Jacket or Modular 3D Ghillie jacket, offering a mix of laser-cut 3D leaves and natural foliage loops to break up your outline in-game. 

The 3D Ghillie Hood is also compatible with the Novritsch LC1 Leaf Camouflage System, offering a more permanent alternative to natural foliage which can be mounted through the mesh, leaving your foliage loops free for "real steel" leaves. Adjustment is provided by elastic bungee cords and when adjusted properly, the hood will move with your head, meaning you don't have to turn your entire body to track a moving target. If you're searching for a hood to finish of your Ghillie kit, the Novritsch 3D Ghillie Suit - Hood is one of the best options out there!

If you are running a ghillie suit, you are missing a trick not camouflaging your rifle too! This Novritsch 3D Camo Cover is designed for the Novritsch SSX303 NBB and covers the entire rifle, preventing a black silhouette from giving you away in the woods.

The cover is easily applied and tightened around your gun using adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle-eyed of opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

If you are running a ghillie suit, you are missing a trick not camouflaging your rifle too! This Novritsch 3D Camo Cover is designed for the Novritsch SSX303 NBB and covers the entire rifle, preventing a black silhouette from giving you away in the woods.

The cover is easily applied and tightened around your gun using adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle-eyed of opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

If you are running a ghillie suit, you are missing a trick not camouflaging your rifle too! This Novritsch 3D Camo Cover is designed for the Novritsch SSX303 NBB and covers the entire rifle, preventing a black silhouette from giving you away in the woods.

The cover is easily applied and tightened around your gun using adjustable drawstrings that match the colour of the wrap. The leaves themselves are incredibly realistic, using irregular patterns and shapes like they would appear in nature so as to fool even the most eagle-eyed of opponents.

The wrap is also fully customisable with Novritsch's Leaf Camo System line or you could even blend real foliage you find on the skirmish field and thread it through the tough, anti-rip mesh system.

If you want to disappear at your next woodland skirmish, Novritsch 3D Leaves will help! These laser-cut 3D leaves are designed to be used for custom Ghillie suit builds and also work fantastically when attached to a helmet, breaking up your outline so you don't draw the human eye in game. 

The set includes 15 strips measuring approximately 70-74cm long and is available in ACP, Amber or Everglade camo patterns, ideal for almost any environment. Whether you're building the perfect custom Ghillie suit for your local site or you want some fake foliage to attach to your hat or helmet to aid your concealment efforts, the Novritsch 3D Leaves will turn you into a walking bush!

If you want to disappear at your next woodland skirmish, Novritsch 3D Leaves will help! These laser-cut 3D leaves are designed to be used for custom Ghillie suit builds and also work fantastically when attached to a helmet, breaking up your outline so you don't draw the human eye in game. 

The set includes 15 strips measuring approximately 70-74cm long and is available in ACP, Amber or Everglade camo patterns, ideal for almost any environment. Whether you're building the perfect custom Ghillie suit for your local site or you want some fake foliage to attach to your hat or helmet to aid your concealment efforts, the Novritsch 3D Leaves will turn you into a walking bush!

If you're looking for a rig with plenty of MOLLE space, full torso coverage and a uniquely modern design, you're after the Novritsch MOLLE Tactical Vest 1.0! An Airsoft-optimised hybrid of an old-school assault vest layout with modern laser cut MOLLE and loads of unique Novritsch quality of life features, the Tactical Vest 1.0 fills a void in the market between hefty plate carrier vests and compact chest rigs.

The MOLLE Tactical Vest 1.0 has more MOLLE loops than almost any modern plate carrier and provides more coverage as a bonus, helping you tolerate the sting of BB hits and carry all the equipment you need for any skirmish duration. Tipping the scales at around 631g, this vest is also barely heavier than a micro chest rig and can be adjusted at both the waist and shoulders, ensuring you get a perfect fit for maximum in-game agility. Inside, you're rocking a hydration pouch so you can add a hydration bladder to keep your thirst quenched along with a pair of admin pockets, ideal for small valuables, maps and other bits and bobs.

If you're looking for a lightweight, cost-effective and practical rig for skirmishing with the pre-requisite Novritsch aesthetic and plenty of space for pouches, the Novritsch MOLLE Tactical Vest 1.0 is a fine choice!

If you've been sweating your BBs off running a plate carrier over summer, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates should cool you down! Like the ASPC 1.0, the 1.2 version is designed with airflow in mind, constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and supplied with Novritsch vented plates.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On the cummerbund, we are treated to magnetic quick-release buckles combined with hinge quick-release shoulder buckles to make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

With the ASPC 1.2 on, you can literally feel the cool fresh air permeating the vented design; a far cry from standard plate carriers which look cool but definitely aren't in terms of temperature. If you're revamping your loadout for summer or you want a plate carrier you can wear comfortably whatever the weather, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates is one to watch!

If you've been sweating your BBs off running a plate carrier over summer, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates should cool you down! Like the ASPC 1.0, the 1.2 version is designed with airflow in mind, constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and supplied with Novritsch vented plates.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On the cummerbund, we are treated to magnetic quick-release buckles combined with hinge quick-release shoulder buckles to make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

With the ASPC 1.2 on, you can literally feel the cool fresh air permeating the vented design; a far cry from standard plate carriers which look cool but definitely aren't in terms of temperature. If you're revamping your loadout for summer or you want a plate carrier you can wear comfortably whatever the weather, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates is one to watch!

If you've been sweating your BBs off running a plate carrier over summer, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates should cool you down! Like the ASPC 1.0, the 1.2 version is designed with airflow in mind, constructed with a base of 100% polyester mesh with vented 1000D Nylon laser cut MOLLE and supplied with Novritsch vented plates.

Load-bearing capacity is provided by laser-cut MOLLE loops and an optional buckle-up front panel, offering the two most modern pouch attachment interfaces in a single rig, with the option to ditch the frontal buckles if you prefer to stick with MOLLE or run the carrier slick for better mobility. On the cummerbund, we are treated to magnetic quick-release buckles combined with hinge quick-release shoulder buckles to make donning and removing the carrier easy and quick, even compared with conventional QR buckles.

With the ASPC 1.2 on, you can literally feel the cool fresh air permeating the vented design; a far cry from standard plate carriers which look cool but definitely aren't in terms of temperature. If you're revamping your loadout for summer or you want a plate carrier you can wear comfortably whatever the weather, the Novritsch ASPC 1.2 Airsoft MOLLE Plate Carrier w/ Vented Plates is one to watch!

If you are looking for P90 pouches with a gorgeous modern aesthetic, Novritsch has you covered! The Novritsch SSR90 Magazine Pouch 1.2 is constructed with a fabric outer with an adjustable elastic retainer, meaning you can securely tighten your magazines in the pouch to ensure they won't fall out! There is also a Velcro flap to further secure your pouches.

The pouch can be mounted both vertically and horizontally, depending on how much MOLLE you have available. There are also additional MOLLE sections on the front of the pouch, allowing you to mount pouches on pouches on pouches! Inside there is a pull tab, designed so you can quickly pull your magazines out if you are in the middle of a battle.

Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, the Novritsch SSR90 Magazine Pouch 1.2 will allow you to carry as many SSR90/P90 mags as you need to get the job done!

If you are looking for P90 pouches with a gorgeous modern aesthetic, Novritsch has you covered! The Novritsch SSR90 Magazine Pouch 1.2 is constructed with a fabric outer with an adjustable elastic retainer, meaning you can securely tighten your magazines in the pouch to ensure they won't fall out! There is also a Velcro flap to further secure your pouches.

The pouch can be mounted both vertically and horizontally, depending on how much MOLLE you have available. There are also additional MOLLE sections on the front of the pouch, allowing you to mount pouches on pouches on pouches! Inside there is a pull tab, designed so you can quickly pull your magazines out if you are in the middle of a battle.

Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, the Novritsch SSR90 Magazine Pouch 1.2 will allow you to carry as many SSR90/P90 mags as you need to get the job done!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Do you feel like your stock is just a waste of space? Well, then you need a pouch for your stock! The Novritsch Rifle Stock Pouch is designed for fixed sniper stocks but will also be compatible with shotgun stocks. It is constructed from 1000D Nylon, making it strong and water-resistant. It attaches to your stock with adjustable Velcro straps and elastic straps, the adjustable design ensures that this pouch can fit on a variety of different of different stocks.

The pouch has a zipper pocket on the right side of it, the Novritsch Rifle Stock Pouch comes with a CO2 bulb insert attached to the Velcro internal, this can be swapped out for other inserts or removed to allow for storing a spare sniper or shotgun magazine. There is also a Velcro section present on the pocket, perfect for I.D. and morale patches, or for Velcro-mounted gear, such as a shotgun shell pouch.

The left side of the Novritsch Rifle Stock Pouch has been padded with extra material, making aiming down sights more comfortable for sneaky snipers who spend a lot of time scoping out their foes. If you want your stock to become its own very tactical accessory, the Novritsch Rifle Stock Pouch is exactly what you need!

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC2 Camo Leaf roughly depicts a rhododendron leaf and is perfect for blending in with small bushes during a skirmish. 

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC2 Camo Leaf roughly depicts a rhododendron leaf and is perfect for blending in with small bushes during a skirmish. 

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC5 Camo Leaf roughly depicts a holly oak leaf and is perfect for blending in with dense trees during a skirmish.

If you like to sharpen your skills at home between skirmishes, the Novritsch Texas Star Target will be a valued addition to your home range. An Airsoft-optimised version of common Texas Star Targets used in the real steel world, the Novritsch version mounts its 5 targets via magnets, minimising the chances of wear and tear eventually causing damage. 

The targets themselves and the spinning array are made from steel and include mounting holes for permanent positioning, though the array stands well on its base without the need to be screwed down. The name of the game is clearing the array by knocking the targets off as quickly as possible. After the first target is hit, the array will start spinning and suddenly hitting anything gets a bit more challenging!

If you don't get to skirmish as often as you'd like but are always up for honing your skills, the Novritsch Texas Star Target will have you shooting like Jerry Miculek (if you haven't heard of him, look him up and thank us later!) in no time!