Delta Armory Airsoft

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

While the internals of the DA-C06-EGL are similarly equipped to the original CHARLIE™ series, the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

Those seeking a lightweight yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you're just starting your Airsoft journey and looking for an affordable lightweight polymer build M4/AR-15 AEG with programmable fire controls, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is what you need. This M4/AR-15 AEG boasts the latest MOSFET/ETU system from Delta Armory, known as the EAGLE™.

The internals of the DA-C05-EGL are similar to the original CHARLIE™ series, but the EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced primary, for an entry-level price!

For those seeking a lightweight, yet advanced starter AEG with reinforced internal parts and full compatibility with aftermarket M4/AR-15 AEG upgrades, the Delta Armory DA-C05-EGL CHARLIE™ Silent Ops 7 M4/AR-15 AEG is one to watch!

If you need a platform for dealing with foes at range, the DA-A15 ALPHA™ is the right tool for the job. This Delta Armory AEG boasts full metal construction and a selection of pre-upgraded internals, including a 6.03mm tightbore inner barrel, rotary HOP-up unit and an upgraded piston, delayer chip and tappet plate from SHS. 

On the outside, we are treated to an M-LOK handguard styled after the popular Strike rail system, a unique Delta Armory receiver featuring a built-in enlarged trigger guard and magazine well gripping texture along with the simply awesome Delta Armory battery stock, to name but a few of the slick ergonomic features of the platform. If you need a longer platform for a DMR build or woodland warfare, the DA-A15 is a sure hit if you are into modern ARs!

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If you're looking for a sniper rifle with more than its fair share of robust internal components, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fine choice. Externally based on the real steel M24 sniper rifle hybridized with the R700 sporting rifle, Delta's M24 is designed for mobility, keeping weight to an absolute minimum and trimming off any unnecessary frills which add more weight than their worth.

Inside, we are equipped with a CNC Steel cylinder, CNC aluminium piston, 90-degree sear and CNC steel spring guide, giving you the parts you need to keep the M24 running in the long run and avoiding the usual affordable sniper rifle hurdle of whacking a super strong spring into a platform that isn't ready for it. Though the M24 may use its own unique internal system, the HOP-up rubber is compatible with aftermarket VSR/GBB rubbers so the upgrade fiends can get their fix. If you want to sample sniping but don't want to get in too deep with an expensive primary, the Delta Armory M24 R700 Spring Bolt Action Sniper Rifle is a fantastic option!

If your M4/AR-15 AEG is a bit scratched up, the Delta Armory Receiver Set for M4/AR-15 AEG will sort that out! This set includes the upper and lower receiver, fire selector switch and front receiver pin, available in high density polymer or alloy construction. If you're working on a lightweight build, the polymer version is ideal. If you want weight and realism, you want the metal version!

Styling-wise, this receiver set is Delta's own design, inspired by real steel "Billet" receivers found on high-end, ultra-modern real steel AR builds. The trigger guard is enlarged and built-in, improving strength when compared to milspec receiver designs, in line with the latest real steel ARs hitting the market. As we might expect, we are treated to a 20mm Picatinny receiver rail running along the top, ready for a red dot sight, scope or iron sights. 

If you're building from scratch, you will need a charging handle, magazine release, dust cover and mock rear pin to complete the receiver itself, along with your internals and pistol grip. While we can make no guarantees, parts from most other brands should fit this receiver without issues. Whether you need a bargain receiver for a scratch build or want to change the build style of an existing M4/AR-15 AEG, the Delta Armory Receiver Set for M4/AR-15 AEG will do the trick!

If you are keeping your eye out for a base for your dream DMR build and have a certain sneaky playstyle, the DA-A10 ALPHA™ Silent Ops DMR should fit you like a glove. This M4/AR-15 platform is part of Delta Armory's ALPHA™ line, top of the range when it comes to externals and boasting more than its fair share of pre-upgraded internal parts as a bonus!

Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The quick change spring makes for a relatively easy DMR upgrade, meaning if you want the DA-A10 to live up to its name you'll have a much easier time of it! 

Whether you want a stealthily styled AR platform for mid to long range engagements or you're working on a suppressed DMR build, the DA-A10 ALPHA™ Silent Ops DMR already has the aesthetic and the upgraded internals; all it needs is pointing in the right direction!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're looking for a full metal AEG with great DMR potential, the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG is one to watch. As with the other Delta Armory ALPHA™ line AEGs from Delta, the DA-A15-EGL boasts full metal construction with the unique Delta Armory receiver and flawless machining throughout. 

Unlike the standard DA-A15, this version is rocking the EAGLE™ programmable MOSFET, offering a wide range of programmable fire modes including semi-auto only and sniper delay. Being a relatively long platform, the inclusion of the EAGLE™ makes the DA-A15-EGL a relatively easy DMR conversion, thanks in part to its quick change spring system. The EAGLE™ MOSFET's other tricks include burst modes of various durations, binary trigger, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you loads of advanced features for a remarkably affordable price. 

If you like to skirmish in the great outdoors with a primary at the cutting edge of external design, bristling with accessory attachment points with full compatibility with aftermarket upgrades and an impressively advanced starting point, you'll love the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG!

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

If you're looking for high-grade tracer BBs, the Delta Armory 0.25g Diamond 6mm Tracer BBs are the right tool for the job. Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential. These are the tracer versions and will glow brightly when shot through an Airsoft gun with a tracer unit, adding an instinct aiming and psychological warfare advantage, especially up close!

If you need tracer BBs for a mix of CQB and outdoors, Delta Armory 0.25g Diamond 6mm BIO Tracer BBs are the one to go for! Supplied in a resealable bag of 4000, Delta's Diamond BBs are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. Boasting only a 0.01g weight difference between individual BBs at maximum and tight tolerances of only +/- 0.01mm, these biodegradable tracer BBs are without compromise!

When shot through a tracer unit, these BBs will illuminate in bright green so you can see where your shots land and adjust accordingly. Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 

If you have a night game in the great outdoors or you run 0.28g BBs in a tracer-equipped platform in CQB, Delta Armory 0.28g Diamond 6mm BIO Tracer BBs should be on your shopping list! These BBs are supplied in a 1KG resealable bag of 3571 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

When shot through a tracer unit, these BBs will illuminate in bright green so you can see where your shots land and adjust accordingly. Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

If you need affordable mags for your M4 but insist on maximum realism, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is ideal. Unlike similarly priced Mid-cap magazines, this mag is constructed with a realistic stamped steel shell, holding 130 BBs loaded through the fill/feed port on top using a speed loader or loading tool. 

Compatibiity-wise, this is in every way a standard M4/AR-15 AEG mid-cap and should work in the vast majority of M4, SCAR-L and L85 AEGs. If you're a few mags short of a full loadout, the Delta Armory 130rnd STANAG Mid-cap Magazine for M4/AR-15 AEG is a great way to tool up on the cheap!

This alloy-constructed rail adaptor is designed for KeyMod rail systems and provides a short section of 20mm Picatinny Rail. You can diversify your Keymod rail and equip it with six slots of 20mm Picatinny rail, perfect for foregrips or lasers! They are very easy to install to KeyMod Rail Slots using the included Screws, Nuts and Allen Key.

Treat your Keymod handguard to a whole new world of customisation with the Delta Armory Key-Mod 93mm Picatinny Rail Section!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you have unconventional tastes and fancy a hybrid of the best of both the civilian and military firearms worlds, check out the Delta Armory R15 FREYA™ Gen.2 MK18 M4/AR-15 AEG. This full metal M4/AR-15 platform is rocking the extremely popular MK18 MOD.1 quad rail up front with the unique skeletonised receiver FREYA™ receiver, based on the real steel GrandPower Firearms R15 FREYA™ rifle. This is the Gen.2 version, boasting the best combination of Delta Armory internals yet!

Internally, the Gen.2 FREYA™ MK18 features CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1 series. 

If you love a strange combination with an advanced ETU, the Delta Armory R15 FREYA™ Gen.2 MK18 M4/AR-15 AEG should put a smile on your face. With the same stunning externals as the original but outfitted with a game-winning combo of the advanced EAGLE™ MOSFET and high-speed ETU internals, this unique MK18 build is at the top of its game!

If you're looking for a DMR style build ready for locking to semi with a quick change spring system, this bundle is for you! We paired the Delta Armory DA-A13-EGL with the superb Delta Armory 1-6x24IR LPVO scope with mount and the ASG HUSH XL Suppressor.

This thing looks the business, a proper modern DMR/SPR build, but also gives the option to lock the DA-A13-EGL to semi-auto only, switch out the spring and make it a proper DMR! If you had a DMR build planned, why not save a few quid with the DMR Dominator Bundle?

If you need magazine pouches but use a variety of pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is ideal. This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any pistol magazine, from Glock to Hi-Capa through MK23 to Five-seveN!

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you live by the philosophy "variety is the spice of life" when it comes to pistols, the Delta Armory Adjustable MOLLE Magazine Pouch for Pistol Mags is the pouch for you!

If you're working on a featherweight M4 build, Delta Armory has the buffer tube for you! The Polymer Buffer Tube for M4/AR-15 AEG is compatible with most Airsoft M4/AR-15 platform AEGs and should also fit AR-9 AEGs which use the same stock mounting lug as standard Marui-spec M4 AEGs.

Providing 6 positions of stock adjustment for whatever M4/AR-15 sliding stock you mount, the tube is constructed from high density polymer with a textured matt finish and is solid as a rock, despite its ultra-low weight. The set also includes the correct length mounting bolt and spacer so you won't have to work too hard to fit it!

If you need affordable MOLLE pouches for your M4/AR-15 magazines, the Delta Armory MOLLE Magazine Pouch for M4/AR-15 Magazines is exactly that. Constructed from Nylon, this pouch holds a single M4/AR-15 platform mag and boasts adjustable retention via bungee cord, allowing you to loosen retention for a faster draw or tighten it up for more security. 

The pouch is open top for fast access and mounts to MOLLE webbing, equipped with additional MOLLE loops on the front so you can stack more MOLLE pouches on top if needed. Available in flat colours or camo patterns, the Delta Armory MOLLE Magazine Pouch for M4/AR-15 Magazines is simple and functional, ideal for practically any loadout which involves an AR!

If you prefer shorter AR platforms and want something full metal with a programmable MOSFET, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. Also present inside is the Delta Armory EAGLE™ programmable MOSFET/ETU, a serious game changer!

With the EAGLE™ ETU, you can program the fire controls for burst modes of various durations, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking using only the trigger and fire selector of the gun itself. The result is an incredibly advanced M4 AEG with almost unlimited flexibility via the advanced EAGLE™ ETU and full compatibility with aftermarket upgrades for those who want more. If you like your ARs as cutting edge on the inside as they are externally, the Delta Armory DA-A13-EGL ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you're looking for lower face protection with more flexibility than full-mesh designs, the Delta Armory Mesh Lower Face Mask Gen.2 is ideal. This mesh lower face mask has fabric sides, intended to provide a great balance between protective qualities and comfort, allowing you to get a cheek weld on the stock of your primary without any awkward neck movements. The harness of the Mesh Lower Face Mask Gen.2 is fully adjustable, making it suitable for practically any head size. 

Available in a vast range of camo and solid colour options to suit any loadout, the Mesh Lower Face Mask Gen.2 works with helmets and communications headsets seamlessly, though will require a bit of fiddling for optimal comfort. If you're looking for a more flexible alternative to your usual lower face protection, the Delta Armory Mesh Lower Face Mask Gen.2 is what you need!

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!