- CNC Aluminium housing
- Titanium shaft assembly
- Pinion gear & spring included
If you're working on the ultimate AEG build, the Warhead Industries Ronin CNC Brushless Motor; Long Shaft should be on your shopping list! Outdoing even the legendary Warhead CNC Black brushless motors used by Bolster Armouries, the Ronin is the absolute pinnacle of AEG motor technology, boasting improved quality magnets, a titanium shaft assembly, hard-wired spade connectors and a weight-reduced rotor.
"Ronin" means a wandering Samurai, a reference to the Warhead Industries stator winding master, a single expert with over 20 years of winding experience who hand winds each Ronin motor personally. While the CNC Black motor also has a hand-wound stator, this is done by regular line workers and while precise, cannot match up to the efficiency and quality of the expertly wound Ronin.
If you want your AEG shooting at its absolute best and maintaining it in the long run, the Warhead Industries Ronin CNC Brushless Motor is essential. Naturally, such a high-performance motor will require expertise to run properly and other reinforced parts to keep up. If you're the techy type and require the best brushless motor on the market, this is it!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
You've probably heard of the Warhead Industries CNC Black Brushless motor, often regarded as the best of the best when it comes to AEG motors. This, the Ronin CNC Brushless Motor is the next step up, boasting all of the impressive features of the CNC Black but with several improvements focussed on improving efficiency and longevity.
When compared to the CNC Black, the Ronin boasts a titanium shaft assembly which is lighter and stronger than the steel shaft of the CNC Black. The internal magnets have been upgraded, selected for their top-notch quality and high strength. The rotor has also been treated to weight reduction, improving efficiency, reducing wear and tear and providing equivalent torque and speed for a far smaller current draw.
The Ronin is named for its stator winding process, or rather, the individual doing the winding! All Ronin motors are hand wound, just like the CNC Black, but unlike the Black, the Ronin stators are wound by a stator winding expert with over 20 years of experience at the Warhead Industries factory. This guarantees top-tier performance, efficiency and power, but since only one dude is doing the winding, these motors are in very limited supply!
Like the CNC Black, the Ronin is equipped with an ESC (electronic speed control) module which can be replaced easily thanks to its modular design. This circuit controls and regulates the speed of the motor while providing low voltage cut-off and over-current-draw protection, providing an additional level of safety and keeping your battery healthy.
The pre-installed spade connectors are hard-wired, making motor installation a bit easier than the CNC Black and giving you more flexibility when it comes to how you route the wiring. The spade connectors (known as "power tabs" by Warhead) are covered with heat shrink as supplied and you will need to carefully remove the heat shrink before installing the Ronin. Please note, the spade connectors of the Ronin and other brushless motor designs are a bit more delicate than standard brushed motor spade connectors. We suggest being very careful when working with them to avoid damage.
The housing is CNC machined from 7075 aluminium and finished in red, with externals adorned with the Warhead Industries logo and "RONIN" on the stator wind. The shaft shroud is also CNC'd from aluminium and finished in black, adding some contrast to the design. It really is a shame that the high-end aesthetic is hidden inside, but the performance of a Ronin-equipped AEG will definitely be evident to onlookers!
Compatibility-wise, the Ronin is a long shaft motor, meaning it will work with standard M4/AR-15, SMG-5, G3 and P90 AEGs. Being an insanely high-performance motor regardless of whether you go for the 31K or 45K RPM version, you will need a decent level of technical proficiency to install the Ronin and some in-depth knowledge of the other internal parts you will need to upgrade to withstand the Ronin's insane speed and torque. The set includes the motor itself, a D-type pinion gear, a pinion spring and shaft housing and will require manual assembly.
If you feel the need for extreme speed and have the technical skills to pull off a build with this beast, you simply won't find a better motor than the Warhead Industries Ronin CNC Brushless Motor anywhere currently!
Features
- CNC 7075 Aluminium housing - Red finish, marked "RONIN"
- Brushless motor advantages:
- Reduced heat build-up
- Higher torque-to-weight ratio
- Increased reliability and less maintenance required
- Reduced mechanical noise
- Less electromagnetic interference (EMI)
- Less electrostatic discharge (ESD)
- 31K RPM or 45K RPM speeds available - Super fast or INSANE!
- Long Shaft motor - Compatible with M4/AR-15, SMG-5, P90 & G3 AEGs
- Titanium shaft assembly - Lighter and stronger than CNC Black or Base motors
- Weight-reduced rotor - Higher speed with lower current draw
- Hard-wired spade connectors - Improved durability, more fitment options
- Upgraded magnets - The highest quality magnets available, improved strength over the CNC Black motor
- Hand wound stator - Wound by the Warhead Industries stator expert with 20 years of experience!
- Electronic Speed Control Module - Regulates speed, provides low voltage cut-off & over-current-draw protection
- D Type motor shaft - Widely regarded as the strongest shaft type, compatible with D-type pinion gears
- CNC Steel Pinion gear, spring steel pinion spring and CNC aluminium shaft housing included
- NOT recommended for amateurs - This motor is no joke, you will need a lot of reinforced parts to run it!
Package Includes
- Warhead Industries Ronin CNC Brushless Motor; Long Shaft
- Pinion gear
- Shaft cover
- Pinion spring
Specification
General
|
Parts & Accessories Type
|
Electric Internal Parts
|
|---|---|
|
Internal Part Type
|
Motor & Parts, Motor,
|
 |
 Custom Parts
|
|
Name Variant
|
31k RPM, 45k RPM,
|
Construction
 |
Red
|
|---|---|
 |
CNC Aluminium shroud. Titanium shaft assembly. Hardened steel pinion gear. Spring steel height adjustment spring.
|
|
Internal Part Construction
|
Steel, Aluminium, Titanium,
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
|
Package Includes
|
|
Electric Part Specific
|
Gearbox Version Compatibility Variant
|
Most Airsoft AEG
|
|---|
Motor Specific
 |
Warhead Industries Ronin CNC Brushless Motor
|
|---|---|
|
Motor Shaft Length
|
Long
|
|
Motor Pinion Type
|
D-Type
|
|
Motor Speed
|
Approx. 31000RPM, Approx. 45000RPM,
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.