WADSN PEQ-15 LA5; Red Laser/White Light Version

WADSN
Code:
35.99
  • White light/red laser version
  • Strobe/constant-on modes
  • Pressure switch included

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

Full description

Description

A PEQ box is one of those essential items if you want to rock that fully decked out special forces look, and the WADSN PEQ-15 LA5; Red Laser/White Light Version adds some impressive functionality to go along with the elite aesthetic. This PEQ unit provides both a bright white light with a stroboscopic mode, ideally suited to navigation and disorienting the enemy whilst breaching a room, and a red aiming laser to assist in landing those all-important first shots. The LA-5C variant of the PEQ15 is the latest variant to enter the market and is a must for an ultra-modern setup.

The activation switch for the PEQ15 LA-5C can be found on the top of the unit, right in the centre. This button allows you to scroll between the different activation modes which include white light only, red laser, red laser and white light and white light strobe.

The included pressure switch activates the unit in the mode of choice and connects via the 2.5mm PEQ jack on the rear of the unit. The pressure switch provides "momentary on" functionality, meaning that as long as the pressure switch is held down the unit will stay turned on.

Included in the box is a small section of 3M Velcro, allowing you to attach the pressure switch to your primary in a position that suits your playstyle. The rotary dial on the top of the unit provides no function but is present to add some realism to the unit, along with the two alloy "visible light locking" screws which are anodised in blue; another nod to realism to match the real PEQ15 LA-5C perfectly.

The bezel at the front left of the unit contains the white light LED and includes a diffuser cover to both protect the lens from incoming fire and soften the light for more discrete navigation. This diffuser cover is retained via rubber straps and can be pulled to the side to allow the light to be used for offensive operations, with its dazzlingly bright LED helping to disorient the enemy, giving you a precious extra few seconds to land your shot.

The dual aperture on the front right of the unit is where the red laser is housed, sitting in the lower of the two apertures. This laser can be adjusted and zeroed using the adjustment screws on the top and right side of the unit, allowing this laser to actually be used for aiming rather than just adding cool points (which it still does, by the way). The laser aperture also includes a cover that can be pushed to the side to reveal the laser itself.

At the rear of the unit, on the left side, we can find the battery compartment of the WADSN PEQ15 LA-5C which holds 1x CR123a cell (not included). To access the compartment, simply unscrew the cap, after which your batteries can be inserted. To facilitate battery swaps in the field the battery cap is retained on the unit with a rubber lanyard, which stops the cap from falling and getting lost. The battery cap is sealed thanks to a rubber O-ring, which should help the PEQ unit resist minor moisture from moderate rain etc.

If you want to push the looks of your primary into the top tier, a PEQ-15 is a fantastic, functional way to do it. As an alternative to the more expensive laser/light combo units on the market, this WADSN PEQ-15 LA5; Red Laser/White Light Version is a fantastic choice for those who want the Gucci look without spending Gucci bucks!

Features

  • Bright white light with diffuser cover
  • Realistic dummy function dial with lockout screws
  • Adjustable red aiming laser - Hip-firing heaven!
  • The main activation button scrolls between modes
  • Battery compartment with O-ring for water resistance (do not submerge it though!)
  • Polymer construction with alloy mount insert and steel screw
  • Includes realistic warning stickers
  • Supplied in a polymer hard storage case
  • Faithful replica of the latest PEQ15; the LA-5C

Package Includes

  • WADSN PEQ-15 LA5; Red Laser/White Light Version
    • Pressure switch
    • Stickers
    • 3M Velcro strip

Specification

General

Parts & Accessories Type
Flashlight, Torches, and Lasers, Flashlight / Torch, Laser,
Over 18 Only Icon
Over 18
No
Patrol Base - Warning Icon
Warnings
Laser

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 0.136kg

Construction

Colour Wheel Greyscale
Item Colour
Black, Dark Earth,
Construction Icon
Construction
Polymer body with alloy mount insert with steel mounting bolt and adjustment screws.
Material Icon
Material
Rubber, Polymer, Steel,
Rail System Icon
Rail System
20mm RIS / RAS