- 45rnd Capacity
- Internal temperature sticker
- For Tokyo Marui Saiga-12K
Suppose your Tokyo Marui Saiga-12K needs some spare magazines to keep it fuelled during a skirmish, the Tokyo Marui 45rnd Saiga-12K Magazine is exactly what you're searching for! This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!
The magazine holds 45 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To load this magazine, you have to use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.
The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine.
- CO2 Powered
- 28rnd Capacity
- Great in Cold Weather
Do you need some spare mags for your KJ Works M1911A1? Well, you're in luck! The KJ Works 28rnd CO2 Magazine For KJW 1911 is designed specifically for that pistol. It holds 28 BBs which is an impressive amount considering some pistol magazine capacities.
CO2-powered guns work exceptionally well in cold weather, whereas some other gas-powered guns often struggle. However, be warned that if you try to dump an entire Magazine quickly, you could cause damage to the Nozzle of your Pistol due to the cold temperatures and power of the CO2 gas. Also, remember that CO2 does not contain any lubricant of its' own, so you will need to lubricate your Pistol regularly using a Silicon Lubricant to keep it in tip-top condition.
- 40rnd capacity
- For GBBR AK platforms
- "Rock and lock" insertion method
Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.
The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.
If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!
- Taran Tactical Baseplate
- For JW3 & JW4 Combat Master
- 30rnd Capacity
A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.
- For EU & G-Series Pistols
- Metal Construction
- 25rnd Capacity
A spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and WE Europe's G-Series of gas blowback Airsoft pistols.
- Full Metal Construction
- 25 Round Capacity
- Polymer Feed Lips
ASG MK23 Socom magazines are currently readily available at an affordable price. Delivering great gas efficiency too; on a good day expect up to three if not more full magazines worth of shots from one charge of gas.
- 23rnd Capacity
- For AAP-01 Pistol
- Green Gas Magazine
This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.
If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.
- For GLOCK 17 GEN4
- 25 BB Round Capacity
- Fully Licensed GLOCK Magazine
A 25 Round Green Gas Powered Magazine designed for the Airsoft GLOCK 17 Gen4 by UMAREX. This magazine works with the Umarex/VFC Glock 17 GBB and is also compatible with the KRYTAC Maxim 9 GBB but is not compatible with 4.5mm Air pistols.
- Green gas magazine
- Flat Baseplate
- For Army 1911 GBB Pistols
A spare or replacement Magazine for Army Armament branded 1911 series Gas Blowback pistols, holding a total of 25rnds and being compatible with R31 and R29 models. It has a flat baseplate so that it fits flush with the bottom of the Pistol Grip, and is reportedly compatible with Army, APS, KJ Works and Tokyo Marui models.
- Compatible with Golden Eagle/ JG MC series GBBR
- Replacement/Spare magazine
- Alloy construction with Polymer feed lips
If you are a GBBR user you will be well aware that your magazines hold a mere 6th of what the average AEG high-cap holds, so spare magazines are a must unless you are pretty speedy with a speedloader!
- 28 round capacity
- Full metal construction
- For gas Hi-Capa pistols
This 28rnd Green gas magazine is designed for the SRC Hi-capa GBB series, including the Baba Yaga and Kikimora pistols. The magazine can be loaded either through the feed lips or by dragging the follower down to the bottom and loading through the bottom of the feed channel.
- 40 Round Magazine
- Licensed By H&K
- For Heckler & Koch GBB MP7A1
A 40 Round Green Gas Magazine for the UMAREX Airsoft Gas Blowback MP7A1.
- For GLOCK 17 GEN5
- 25 BB Round Capacity
- Fully Licensed GLOCK Magazine
A 25 Round Green Gas Powered Magazine designed for the GLOCK 17 Gen5 by UMAREX.
- For 1911 MEU / VX-9 Pistols
- 36 Round Capacity
- Gas Magazine
A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle.
If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go.
- For 1911 MEU / VX-9 Pistols
- 36 Round Capacity
- Gas Magazine
A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle.
If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go.
- For EU17 Gen5
- 25rnd Capacity
- Fits Gen 3 / Gen 4
A spare or replacement Gas Magazine for the WE branded EU17 series Pistols. It is designed for the GEN 5 iteration of the EU17 but will function with GEN 3 and GEN 4 Pistols as well. It holds a total of 25rnds and can be filled with a Speedloader from the top or bottom.
- 42rnd Capacity
- Alloy construction
- Magazine for HFC HG-203 MAC-11 GBB
If you are running a MAC-11 GBB that unbelievable rate of fire will have you needing plenty of spare mags, so stock up while they're hot! The HG-203 MAC-11 Green Gas Magazine from HFC holds 42 BBs, all of which will be gone in a couple of seconds on full auto! The magazine can be loaded through the feed lips by pulling the follower down to the bottom, where it will lock into place. You can load this mag either by hand or by using an Airsoft speed loader. Once you are finished loading, press the small protruding tab on the follower to release it and reapply tension to the feed spring. The fill valve is located on the bottom of the magazine and can be filled with summer gas or green gas.
- 60rnd Low-Cap Green Gas Magazine
- Three magazine pack - Great value
- Licensed trademarks from KRISS®
If you're planning to grab the KRYTAC Vector when it drops, this is the cheapest way to fill your rig! This three-pack of low-capacity green gas magazines is designed exclusively for the Airsoft KRYTAC KRISS® Vector GBB, created by KRYTAC and officially licensed by KRISS®.
- Extra Gas Capacity
- Extended Baseplate
- 30 Round Pistol Mag
Want to run your trusted side arm as a primary? Now is your chance! A 30 round magazine for the 1911 platform designed for the Army Armament 1911 / R32.
- 25 Round Capacity
- For GLOCK 17 GEN4
- Fully Licensed GLOCK Magazine
A 25 Round CO2 Powered Magazine designed for the GLOCK 17 Gen4 by UMAREX.
- 35rnd Capacity
- High density polymer shell
- For Double Eagle Noveske N4 MWS GBBR
If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!
The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.
The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.
- 35rnd Capacity
- High density polymer shell
- For Double Eagle Noveske N4 MWS GBBR
If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!
The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.
The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.
- TM Compatible
- Solid Construction
- Protected Knocker
A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.
- For VORSK VX-9 and MEU
- 36 Round capacity
- Keep your pistol shooting this winter!
A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.
If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!
- For VORSK VX-9 and MEU
- 36 Round capacity
- Keep your pistol shooting this winter!
A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is an extended version of the standard magazine and holds an impressive 36 rounds and is a direct replacement for the magazine which comes with the pistol, filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included allen key, through the baseplate.
If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. This magazine is also great for those Airsoft skirmishers who believe in accuracy through volume, or CQB players who want to just run around with a spare mag in their hand and go shoot. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!
- For VORSK VX-9 and MEU
- 21 Round capacity
- Keep your pistol shooting this winter!
A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.
If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!
- For VORSK VX-9 and MEU
- 21 Round capacity
- Keep your pistol shooting this winter!
A gas blowback Airsoft CO2 magazine developed by VORSK for their VX-9 and MEU range of pistols, constructed with an Alloy Body and Polymer base plate. The magazine is of standard magazine length, holds 21 rounds and is a direct replacement for the magazine which comes with the pistol. The magazine can be filled with BBs from the top or front, and CO2 bulbs can be installed through the side of the shell and tightened using the included Allen key, through the baseplate.
If you're looking to bolster your VORSK VX-9 or MEU pistol with 100% compatible magazines then this is the way to go. Particularly useful for the winter months, using CO2 should reduce the effect of cooldown on your pistol!
- 30 Round Capacity
- For H&K 416A5 GBB Rifle
- Fully License By Heckler & Koch
A 30 Round Green Gas Magazine for the UMAREX Heckler & Koch HK416A5 Airsoft Gas Blowback Rifle and also compatible with VFC M4/AR-15 GBBRs.
- Easy To Maintain
- 24rnd Capacity
- For GBB F226
A Spare Gas Blowback Magazine for any generation of the WE F226 range.
- 30rnd Green gas Magazine
- For Double Eagle JDG PFS9 and EU series
- Extended gas reservoir - Better rapid-fire performance
If you own the gorgeous new JDG Polymer 80 PFS9 from Double Eagle, or you have a TM based EU series GBB and you need better rapid-fire performance, this magazine is a great way to get there! The 30rnd JDG P80 PFS9 magazine is constructed from alloy with polymer feed lips and a steel feed spring and holds 30 BBs which can be loaded either using a speed loader or by hand through the feed lips or the feed port on the front which is accessible when the follower is pulled down. The advantage of using this magazine over a standard length EU series mag is its enlarged gas reservoir, meaning better cold weather performance, less FPS variance under rapid-fire and more shots per fill of gas.
Shoot for longer without having to stop and reload your kit
Here at Patrol Base we have a huge variety of Magazine for almost any Airsoft Gun you can think of! Looking for a specific mag? There is a good chance we have it, and if not, we can find it for you.
We have a constant supply of magazines from top brands such as Nuprol, WE Europe, ASG, Toyko Marui and more, for a variety of differnt guns.
Looking for Magazines for your Gas Powered Pistol, Rifle, or Submachine gun, we've got them!
If you can't find something that you like, or want something which isn't on the website why not contact us via Phone and we can do our best to source it for you!
Telephone: 01484 644709