Airsoft Rails

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you're running a KeyMod handguard but want to use 20mm Picatinny accessories, these are what you need! The ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 is constructed from alloy, including 2 short 5-slot rails and one 9-slot rail and the screws you'll need to mount them. 

As with other KeyMod accessories, these rails can be positioned wherever you need them and are compatible with metal KeyMod handguards but won't fit polymer mock-KeyMod handguards. If your favourite vertical grip only comes in 20mm Picatinny flavour or you want to mount a flashlight or PEQ laser to the side of your KeyMod handguard, the ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 will sort you out!

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

A rail panel designed to convert your M-LOK attachment space into a more common 20mm RIS/RAS rail.

A rail panel designed to convert your M-LOK attachment space into a more common 20mm RIS/RAS rail.

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

If you're looking for a rail riser for a clearer view down your optic, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version should suit your needs perfectly. This riser is based on the real steel Unity Tactical FAST riser, designed to provide a more natural neck position for improved comfort and faster target acquisition, especially for full-face mask and respirator users. 

Being constructed from high-density polymer makes this version of the PTS Unity Riser around half the price of the original aluminium version while offering the same performance as it pertains to Airsoft. If you're seeking a riser and want something a little more tacticool, the PTS Syndicate Unity Tactical FAST 20mm Picatinny Optic Riser; Polymer Version is exactly that!

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

A Pair of Modular 20mm RIS accessory rails designed to be fitted on to AR36 Style Handguards allowing the attachment of aftermarket parts and accessories. 

If you want a red dot sight on your AKS-74U but aren't a fan of the Russian side rail, 5KU has what you need! The 20mm Rear Sight Rail for AKS-74U AEG/GBBR is designed to mount over the rear iron sight of AKS-74U rifles, both the AEG and GBBR variety, providing a length of 20mm Picatinny rail measuring 8cm approximately. 

The part is constructed from aluminium to provide a great balance of strength and low weight and should fit most AKS-74U Airsoft guns on the market, though some may require slight modification. If you want to mount a red dot sight for faster target acquisition but still want to be able to fold your stock for tight quarters, the 5KU 20mm Rear Sight Rail for AKS-74U AEG/GBBR is the key!

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

An Aluminium constructed Rail Mount for AKS-74U Platform Airsoft Replicas, which will install to the Rear Ironsight Block and provide a 20mm RIS/RAS Rail for installing a Red Dot Sight. If you own an AKS-74U and you want to start decking it out with bells and whistles, then this is an ideal place to start.

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

This alloy-constructed rail adaptor is designed for KeyMod rail systems and provides a short section of 20mm Picatinny Rail. You can diversify your Keymod rail and equip it with six slots of 20mm Picatinny rail, perfect for foregrips or lasers! They are very easy to install to KeyMod Rail Slots using the included Screws, Nuts and Allen Key.

Treat your Keymod handguard to a whole new world of customisation with the Delta Armory Key-Mod 93mm Picatinny Rail Section!

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

An Airsoft modular rail panel designed to fit onto KeyMod hand guards, providing a 2'' 20mm RIS / RAS rail. The product comes as a kit and is easily built and can quickly be installed to KeyMod hand guards to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is a perfect purchase for any Airsoft player who has got their hands on a new rifle and is looking to take their gun to the next level by attaching parts and accessories.