Viewing 120 of 120.
grid
list
154.99
  • Brushless motor
  • 39K or 48K RPM speeds available
  • Long Shaft - M4/AR-15, SMG-5, G3 & P90 AEGs

If you're on the hunt for upgraded motors and need maximum speed and torque, the Specna Arms DARK MATTER™ Brushless Motor; Long should fit the bill. This Brushless Motor is Specna's top of the line offering, made with a CNC aluminium housing and available in ultra swift 39K RPM and the diabolically fast 48K RPM variants. This is the "long shaft" version, designed for use in M4/AR-15, SMG-5, G3 and P90 AEGs.

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

From 190.99
  • High-density polymer/CNC alu handguard
  • Licensed by Daniel Defense®
  • HAL¹ ETU Pre-installed - Programmable fire modes

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

From 190.99
  • High-density polymer/CNC alu handguard
  • Licensed by Daniel Defense®
  • HAL¹ ETU Pre-installed - Programmable fire modes

If you've been checking out MK18 AEG platforms, the Specna Arms Daniel Defense® SA-C19 CORE™ HAL ETU™ MK18 M4/AR-15 AEG is a fantastic option to weigh up. This licensed and trademarked MK18 AEG adds an enhanced real steel receiver to the Milspec MK18 mix, providing an iconic design with an added sprinkling of realism from the real steel Daniel Defense® trademarks.

This, the latest SA-C19 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

From 345.49
  • CNC Aluminium handguard
  • Kestrel basic MOSFET preinstalled
  • Fancy red receiver trimmings!

If you are looking for an MK18, but you're not interested in keeping to the Milsim bland basic style, then the Specna Arms SA-A03 ONE™ MK18 Red Edition; Kestrel Basic ETU is certainly worth your time. This MK18 is fitted with some stylish red receiver parts, such as the mag release, charging handle and sling plate. The full metal externals give this platform a realistic weight and distribution as well as making it strong and able to withstand even the roughest of skirmishes.

Inside the Specna Arms SA-A03 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

3.99
  • Replacement screws
  • For Version 3 gearbox motor cage
  • Replace your lost bits!

If you have misplaced a screw from your motor cage during upgrading/maintaining your version 3 gearbox, no need to hunt for the perfect screw! This screw set from Specna Arms provides all the screws necessary to attach your motor cage to the gearbox and secure the motor inside the cage.

From 154.99
  • High-density polymer/CNC alu handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

From 154.99
  • High-density polymer/CNC alu handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

Sneaky skirmishers, check this out! The Specna Arms SA-C11 CORE™ HAL¹ ETU™ M4/AR-15 AEG is the perfect close-quarters combat AEG. Featuring a pre-installed suppressor, CNC aluminium handguard and polymer receiver, this Airsoft replica is the perfect companion for those who want to stay light on their feet. Its affordable price point and advanced programmable MOSFET make it an attractive platform for players of any skill level.

This, the latest SA-C11 is rocking Specna's HAL¹ ETU,  boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for an entry-level price point!

3.99
  • Replacement trigger contacts
  • For Specna Arms AR36 AEG series
  • Replaces worn out trigger contacts

If you are having trigger trouble with your Specna Arms AR36 AEG, the solution is here! This unit is a replacement original part for the SA-G series of AR36 AEG rifles and will require disassembly of the gearbox to install, and soldering, as such it is only recommended for experienced techs and advanced users.

From 309.99
  • Full metal construction
  • URX2 style aluminium handguard
  • Preinstalled programmable MOSFET

If you are in the market for an M4/AR-15 optimised for woodland warfare this one would suit you well! The Specna Arms SA-B03 ONE™ replicates the real-world SR-16 rifle, a high-end M4/AR-15 rifle from the US. Like the original SR-16, the Specna Arms version boasts a 10.5-inch free-floated handguard known as the "URX2", an extended handguard with ample rail space, QD sling sockets built-in and perfectly suited to the modern C-clamp grip technique.

On the inside, the SA-B03 has been upgraded to handle stronger springs, sporting a steel quick change spring guide mounted on ball bearings for reduced rotational stress, an aluminium cylinder head and piston head, reinforced steel gears and a lightweight polymer piston with a full rack of steel teeth, plus the added benefit of the programmable Kestrel Basic MOSFET. If you are looking for a base gun for a DMR project this would do the job perfectly thanks to its 16-inch outer barrel and the Enter & Convert™ quick change spring system!

From 345.49
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Kestrel Basic ETU pre-installed
The Kestrel Basic Version of the SA-V26 now features a metallic red trigger guard. Images will be updated shortly to reflect this. 

If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas. 

The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.

If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!

From 297.99
  • Full metal construction
  • DMR and assault rifle-ready
  • Kestral Basic MOSFET preinstalled

This rifle is large and in charge! The Specna Arms SA-B16 ONE™ Mk 12 MOD.1 AEG; Kestrel Basic ETU is a big Airsoft rifle based on the Navy's real steel MK 12 MOD.1 Special Purpose Rifle. This rifle is ready for both assault rifle and DMR duties straight out of the box. The Kestrel Basic MOSFET offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Inside the Specna Arms SA-B16 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

154.99
  • Brushless motor
  • 34K, 39K & 48K RPM speeds available
  • Short Shaft - For AR36, AUG, AK & SG55x AEGs

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

154.99
  • Brushless motor
  • 34K, 39K & 48K RPM speeds available
  • Short Shaft - For AR36, AUG, AK & SG55x AEGs

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

154.99
  • Brushless motor
  • 34K, 39K & 48K RPM speeds available
  • Short Shaft - For AR36, AUG, AK & SG55x AEGs

If you have a high-speed or DMR build planned with an AR36, AK, SG55x or AUG base gun, the Specna Arms DARK MATTER™ Brushless Motor; Short belongs inside! This beastly brushless motor is top-of-the-line in Specna's new motor range, offering a high-quality CNC aluminium housing with powerful brushless motor technology inside. This is the short shaft variant designed for AR36, AK, SG55x and AUG AEGs and is offered in 34K, 39K or 48K RPM flavours, ideal for any build objective which demands extreme speed and torque!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. While installing a DARK MATTER™ motor in your AEG will make it a beast, the more important aspect is keeping it performing in the long term. As is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it!

From 178.99
  • Strike Industries licensed handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

From 178.99
  • Strike Industries licensed handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

The Specna Arms SA-C17 CORE™ HAL¹ ETU™ M4/AR-15 AEG is beautiful. It features Strike Industries licensing on its unique M-LOK handguard, adding to the realism of this mighty fine platform. Its compact nature makes it perfect for close-quarters battles, a versatile and lightweight replica which can be easily manoeuvred around the battlefield is exactly what you need to win!

This SA-C17 is rocking Specna's HAL¹ ETU, it boasts programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a super affordable Airsoft gun!

From 309.99
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Kestrel Basic ETU Pre-installed

This is the most iconic assault rifle! There is a reason why this rifle has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers. The Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-K02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

If you are building a special forces loadout for your skirmishes and you're in search of an iconic platform to match the look, the Specna Arms SA-K02 ONE™ M4A1 AEG; Kestrel Basic ETU is the Airsoft replica for you!

From 166.99
  • High-density polymer/CNC alu handguard
  • 6.03 Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

From 166.99
  • High-density polymer/CNC alu handguard
  • 6.03 Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

This compact platform is exactly what you need for your close-quarters battles. It is short and lightweight, making it a great asset for those who like to stay nimble during their skirmishes. The Specna Arms SA-C21 CORE™ HAL¹ ETU™ M4/AR-15 AEG has an entry-level price point, with veteran-level potential!

This SA-C21 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring.

From 214.49
  • Full metal construction
  • Rock River Arms trademarks
  • Kestrel Basic ETU Pre-installed

Real steel nerds, check this out! The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is a great beginner rifle, easy to pick up and use, superb long-term potential. There is a reason why this rifle style has so many variations and is seen everywhere in Airsoft, it looks good, has plenty of rail space and is just a great overall platform for skirmishers.

The Specna Arms Rock River Arms SA-E03 EDGE™ Carbine AEG; Kestrel Basic ETU is an excellent choice for any Airsoft player, it shoots great out of the box, but there is also plenty of room for upgrades to take this rifle to the next level. The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection.

Put simply, this allows the SA-E03 EDGE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped M4A1 AEGs on the market!

From 309.99
  • Full metal construction
  • Kestral Basic MOSFET preinstalled
  • Integral suppressor

Attention all sneaky skirmishers! The Specna Arms SA-A07 ONE™ M4/AR-15 AEG; Kestrel Basic ETU is exactly what you are looking for, with its integral suppressor, it really doesn't get more covert than this. This platform also boasts full metal construction, making it hardwearing and sure to last in even the roughest of skirmishing conditions.

Inside the Specna Arms SA-A07 ONE™, there are some incredible straight-out-of-the-box internals. It features a Kestrel Basic ETU, 18:1 ratio steel gears running on 8mm ball bearing bushings and a reinforced gearbox shell with an Enter & Convert™ quick change spring guide. This allows you to change the spring without having to open the gearbox itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost.

From 166.99
  • High-density polymer/CNC alu handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

From 166.99
  • High-density polymer/CNC alu handguard
  • 6.03mm Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

If you're looking for a compact and lightweight AR platform which is perfect for close-quarters engagements, the Specna Arms SA-C12 CORE™ HAL¹ ETU™ AEG is a superb choice. This M4/AR-15 AEG follows Specna's "CORE" build standard, featuring a CNC aluminium handguard, alloy outer barrel and suppressor paired with a high density polymer receiver, stock and pistol grip, ideal for skirmishers who like to move fast and maintain high-energy skirmishing all day long.

This, the latest version of the SA-C12 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

154.99
  • Brushless motor
  • 30K, 36K, 44K or 55K RPM
  • For Ares Slim Motor Grips

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it! 

154.99
  • Brushless motor
  • 30K, 36K, 44K or 55K RPM
  • For Ares Slim Motor Grips

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it! 

154.99
  • Brushless motor
  • 30K, 36K, 44K or 55K RPM
  • For Ares Slim Motor Grips

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it! 

178.99
  • Brushless motor
  • 30K, 36K, 44K or 55K RPM
  • For Ares Slim Motor Grips

If you're running an Ares AEG with a super realistic slim pistol grip and seeking a demonic motor, Specna Arms has what you need! The DARK MATTER™ Brushless Motor; Long Slim is designed specifically for Ares slim pistol grips, meaning if you like the realistically slim feel of these grips you now have a superb motor upgrade option!

DARK MATTER™ motors are Brushless Motors, similar to the legendary Warhead Industries examples and boasting lower heat build-up, higher torque-to-weight ratio, improved reliability via reduced friction and significantly reduced operating noise when compared to conventional brushed motors. The DARK MATTER™ range offers several speeds ranging from a potent 30K RPM up to an absolutely insane 55K RPM, though as is always the case with super strong motors, we only recommend the Dark Matter series to those with the technical know-how to ensure their setup can handle it! 

From 190.99
  • High-density polymer/CNC alu handguard
  • 6.03 Tightbore inner barrel
  • HAL¹ ETU Pre-installed - Programmable fire modes

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for!

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

From 202.49
  • High-density polymer/CNC alu handguard
  • PDW style stock
  • HAL¹ ETU Pre-installed - Programmable fire modes

Are you looking for a reliable M4 to help you in your skirmishes, or maybe you're a veteran looking for an affordable AEG to pimp out with your own upgrades, if so, the Specna Arms SA-C25 CORE™ HAL¹ ETU™ M4/AR-15 AEG is exactly what you're searching for! It's more compact than the original SA-C25 with its PDW stock, perfect for staying versatile on the battlefield.

This SA-C25 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive stuff for a beginner-level price point!

From 285.99
  • Full metal construction
  • 6.03mm Tightbore inner barrel
  • Kestrel Basic ETU Pre-installed

Small but mighty! That's one way to describe the Specna Arms SA-B02 ONE™ Mk.18 CQBR AEG; Kestrel Basic ETU, for what it lacks in large stature, it more than makes up for with its construction and performance. This Mk 18 is the perfect companion for any CQB skirmisher, the railed handguard allows for ultimate customisation and the preinstalled MOSFET allows for some serious snappy trigger response.

The Kestrel Basic ETU offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. Put simply, this allows the SA-B02 ONE™ to be set up realistically as SAFE-SEMI-3RND BURST, keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Paired with Specna's standard 6.03mm tightbore inner barrel and rotary HOP-up unit, this is one of the best-equipped Mk.18 AEGs on the market!

If you are building a special forces loadout for your CQB skirmishes and you're in search of a compact Mk.18 to match the look, the Specna Arms SA-B02 ONE™ M4 Carbine AEG; Kestrel Basic ETU is the Airsoft replica for you!

About Specna Arms

Specna Arms is a well-established brand in the Airsoft world, with its replicas coming in at an attractive price with no compromise in features and quality. Specna Arms believes in their brand so much they have a mantra-like promise, the 4S: Satisfying Price, Spring Quick Change, Supreme Quality and a Spectacular range of models.

Specna Arms not only wants to follow the trends of the Airsoft market but to create them as well. They aim to make their replicas unique and exceptional not only in terms of quality but also in their appearance. Specna wants to try to offer you something which you won't find in other brands, and their team of designers are constantly working on something new and better!

With a wide range of M4/AR-15 style AEG replicas available, if you need an M4 Airsoft gun you are sure to find a Specna Arms to suit you. Specna also offers AK47 replicas with full metal construction and pre-installed MOSFETs and Specna's Airsoft Sniper rifle sets complete with a scope and bipod are a great way to get stuck in if sniping is your poison!

Specna also offers a range of accessories such as magazines, both internal and external parts and even complete, pre-built Airsoft gearboxes to complement their Airsoft replicas. With a wide variety of replica series' in their arsenal ranging from the full metal EDGE™and EDGE 2.0™ to the lightweight player focused CORE™ and its latest, the FLEX™ series, Specna Arms has something for beginners and for the pros!