NUPROL

A Single point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon. 

A Single point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon. 

A Single point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon. 

A Single point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon. 

If you have the burning desire to pull a trigger once and see a handful of enemy players leave for respawn, an Airsoft MOSCART grenade launcher is the right tool for the job. The NUPROL 40mm MOSCART Gas Grenade is one of many potential power sources for Airsoft 40mm launchers, offering either 60rnd, 96rnd or 120rnd capacity and unleashing the full payload all at once. The grenade is powered by green gas and can be filled via the fill valve on the top of the shell in the same way you would fill a GBB pistol magazine; invert the can and fill with the grenade sitting on its base. 

The grenade can be loaded with BBs using a speed loader through the apertures on the front. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. As with all Airsoft MOSCART grenades, you will require an Airsoft 40mm launcher to use the NUPROL 40mm MOSCART, so if you don't yet have one in your collection you can check them out here!

If you have the burning desire to pull a trigger once and see a handful of enemy players leave for respawn, an Airsoft MOSCART grenade launcher is the right tool for the job. The NUPROL 40mm MOSCART Gas Grenade is one of many potential power sources for Airsoft 40mm launchers, offering either 60rnd, 96rnd or 120rnd capacity and unleashing the full payload all at once. The grenade is powered by green gas and can be filled via the fill valve on the top of the shell in the same way you would fill a GBB pistol magazine; invert the can and fill with the grenade sitting on its base. 

The grenade can be loaded with BBs using a speed loader through the apertures on the front. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. As with all Airsoft MOSCART grenades, you will require an Airsoft 40mm launcher to use the NUPROL 40mm MOSCART, so if you don't yet have one in your collection you can check them out here!

If you have the burning desire to pull a trigger once and see a handful of enemy players leave for respawn, an Airsoft MOSCART grenade launcher is the right tool for the job. The NUPROL 40mm MOSCART Gas Grenade is one of many potential power sources for Airsoft 40mm launchers, offering either 60rnd, 96rnd or 120rnd capacity and unleashing the full payload all at once. The grenade is powered by green gas and can be filled via the fill valve on the top of the shell in the same way you would fill a GBB pistol magazine; invert the can and fill with the grenade sitting on its base. 

The grenade can be loaded with BBs using a speed loader through the apertures on the front. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs. As with all Airsoft MOSCART grenades, you will require an Airsoft 40mm launcher to use the NUPROL 40mm MOSCART, so if you don't yet have one in your collection you can check them out here!

Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.

A compact LiPo Airsoft Battery, designed to be used in tight awkward spaces, without compromising on overall capacity. It comes supplied with the more efficient Deans connector already installed.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A retention holster designed to fit snugly WE Europe/Armorer Works Hi-Capa Series Airsoft Pistols and can be attached to the users belt. The holster is designed to allow the user to quickly and effectively draw their pistol during combat at maximum speed, whilst still remaining safe. 

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can. 

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.25g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

These BBs are available in both red and green, but if you want red tracers make sure you check your tracer unit can light up red tracer BBs as not every unit can. 

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

High quality WE 11.1v 1450mAh 30C LiPo Stick Battery, provides great battery life and fits most battery compartments. The 30C rating means the battery discharges quicker to give a higher rate of fire and better trigger response.

If you are looking for affordable BBs for use in CQB and with pistols, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is ideal for indoor shooting where you won't need the extra wind resistance and range potential from heavy BBs. 

Being 0.20g in weight approximately, these BBs will have higher projectile speed than heavier options, meaning there is nowhere to hide and no chance of matrix dodging in close-quarters skirmishes. 

Produced by the ever growing brand NUPROL. Ideal for any surface and lens type from goggles to glasses or custom made protection. 

Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas, as well as some rarer types used in RC Car racing.

If you are looking for a posh charger that isn't going to confuse you with a thousand different functions, the NUPROL Balance Charger Pro is the one! This charger works very similarly to other balance chargers but adds an LCD readout display so you can check cell capacity, and adjust the battery type and current settings via the button on the front of the charger.

The charger is compatible with 7.4V and 11.1V Lithium batteries (LiPo, LiFe and Li-ion) and can also charge NiMH batteries with the included 4-pin balance to mini-Tamiya adapter cable. Battery status is indicated by 2 coloured L.E.Ds on the front of the charger body. The charger is packaged with a 2-pin AC adapter and a fused 3-pin UK plug adapter, and to connect the two is as simple as installing the 2-pin connector into the plug and tightening down the central screw with a Phillips head or Pozidriv screwdriver.

If you are looking for a charger upgrade but you don't want to read a manual the length of the Dictionary, the NUPROL Balance Charger Pro gives you all the options you will need without making things overly complex!

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

A 14mm CCW compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, teammate locations, run infection themed skirmishes and generally lighting up the dark with bioluminescence.

A compact LiPo Airsoft battery, designed to be used in tight awkward spaces, without compromising on overall capacity.

A LiPo battery for Airsoft Electric Guns which has been designed to output a high power for fast and consistent trigger response and high rate of fire for up to 3 quarters of a day on a slow charge. 

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft. 

An unique futuristic hard Polymer lower face mask with mesh ventilation for use in Airsoft.