NUPROL

A spare magazine for AR36 Airsoft Guns, which has the option of either a standard 125rnd capacity, or a realistic 30rnd capacity by flicking a switch.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. 

The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

A simple carry case with a padded and soft lining to protect your pride and joy. Designed with a large compartment and padded outer walls its sure to not only make transporting easier but protect anything you choose to store in it.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

A new and stunning MOLLE mounted retention-style magazine pouch design which can expand to fit almost any rifle magazine (within reason), and locks them in place via friction.

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

If you are looking for short M4/AR15 Airsoft magazines, whether it is for a Vietnam War re-enactment or you just want to get nice and low with your DMR to make good use of cover, NUPROL has the answer. This 110rnd Mid-cap magazine is constructed with a steel shell and polymer internals with a steel feed spring and is super short and easy to carry plenty of.

This magazine is patterned after the real world 20-round M16 magazine issued during the early Vietnam war which also found use in SPR and DMR rifles in the much more recent Iraq and Afghanistan conflicts. This magazine is a spring-loaded mid-cap and is loaded using a speed loader or loading rod/tool through the fill/feed port at the top of the magazine body.

Suitable not only for Airsoft but for RC vehicles and toys too. This Stick Battery is relatively large and excellent for ensuring you get a full day's play out of one charge, providing you're not too trigger happy.

A new style of MOLLE mounted retention-style magazine pouch design, which can expand to fit almost any pistol/SMG magazine (within reason), and locks them in place via friction.

A three point sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

A three point sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

A baseball cap designed for use in airsoft skirmishes to protect the user's vision from bright sunlight. The cap is constructed from 100% cotton, is patterned and has several ventilation airholes to keep your head cool in the heat of the moment. 

A baseball cap designed for use in airsoft skirmishes to protect the user's vision from bright sunlight. The cap is constructed from 100% cotton, is patterned and has several ventilation airholes to keep your head cool in the heat of the moment. 

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

A lightweight Polymer mount for FAST, BUMP and MICH Airsoft helmets that have a front mount, allowing you to attach GOPRO cameras to record your gameplay. 

If you have a habit of killing LiPo batteries by running them on too low a voltage, or you would rather not take the chance, a LiPo voltage monitor would be a good call! This device connects to the balance port of your 7.4V or 11.1V Airsoft LiPo and will provide a readout of the voltage of each cell, together with the total battery voltage. This device will also emit an alarm if the cell voltage becomes unbalanced or drops too low, preventing you from damaging your batteries and having to purchase new ones more often than you should. To use the device, you will need to plug the balance lead (small white connector) of your LiPo battery into the leftmost contacts, with the contacts oriented to face downwards. The visible silver contacts on your balance lead should be facing upwards.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A High Capacity Magazine for AR36 series Airsoft Electric Guns, which can be linked together with other Magazines to create one gigantic mega-mag. They hold a total of 450rnds and can be filled from the top of the Magazine via the Fill Window, and are wound from the bottom of the Magazine via the Clockwork Winding Wheel.

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot. 

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

A LiPo crane stock battery designed to fit in crane and solid stocks, where other batteries would be wasting the available space. 

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

A retention holster designed to fit and snugly hold EU-Series pistols with one neat trick up it's sleeve... It will happily accept a pistol with a torch or laser mounted on to it. Flashlight/laser users will know the pain of limited holsters being available, so it's great to combine the flexibility of a fabric holster with the convenience and tacticool features of a moulded retention holster.