NUPROL

NUPROL's latest offering into the Airsoft Market with newly designed 0.20g green and red illuminated tracer BBs, made to be more consistent and have better accuracy that ever before. 

We put this pack together to serve those who run a tracer-equipped pistol in CQB and want to get all their consumables in one go, with a tasty discount as a bonus! 

A LiPo saddle battery designed to fit in handguards in replacement of the traditional 1600mAh NiMH blocks/saddles (G36 handguards etc).

If you are looking for tracer BBs in a heavier weight for use with sniper rifles and upgraded setups NUPROL have what you need! The RZR 0.30g Green Tracer BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are green tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in a low light outdoors setting. These BBs are also biodegradable which is great news for those of us who skirmish at sites which mandate bio BBs!

Folding dump pouch which is designed to hold used or empty magazines to prevent the user from accidently loading an empty during an engagement or fire fight. 

This is a replacement Pressure Pad and Tail Cap Assembly for NUPROL NX600 series Torches. If your Pressure Pad is no longer working, it could prove to be difficult and ineffective to repair it, and will simply be easier to replace the entire assembly. It comes supplied with 2 x adhesive Velcro strips for placing the Pressure Pad on your gun.

If you have a summer of skirmishing planned, this pack should help keep you honest when the weather gets spicy! The GBB Summer Sidearm Pack combines NUPROL Biodegradable BBs and NUPROL 1.0 Summer Gas so you can keep your GBB pistol within skirmishable power limits and prevent excessive wear and tear when things heat up and gas pressure rises. 

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 3.8L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store all your spare batteries when they're not in use.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery with a Deans connector; an ideal setup for a Deans equipped rear wired M4/AR-15 AEG with a buffer tube battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 1.3cm x 1.5cm with approximately 9cm of wiring between the battery and connector. 

An 11.1v 2000mAh Li-Ion battery for Airsoft Electric Guns, which comes supplied in a Crane/Butterfly/Saddle configuration, meaning two rows of cells. This makes them very easy to place in awkard-to-fit spots such as Handguards and Crane Stocks, and will provide better Power Density that traditional LiPo batteries.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

Unlike other pistol speedloaders on the market the NUPROL version is harder to use, in a good way!

Unlike other pistol speedloaders on the market the NUPROL version is harder to use, in a good way!

Unlike other pistol speedloaders on the market the NUPROL version is harder to use, in a good way!

Unlike other pistol speedloaders on the market the NUPROL version is harder to use, in a good way!

A mesh lower face protector designed to protect the user's mouth and lower face from incomming BBs whilst still allowing maximum Air Flow, which can be shaped to fit around the user's face. 

The daddy of speed loaders, allowing up to 470 6mm BBs to be stored at once in a unique AR magazine-style design.

A hard carry case designed for any AR sized RIF but will suit a wide range of firearms from Airsoft to Air rifle and real steal. It's internal space for weapons Measures at 101cm length by 33cm height and 9cm depth.

A hard carry case designed for any AR sized RIF but will suit a wide range of firearms from Airsoft to Air rifle and real steal. It's internal space for weapons Measures at 101cm length by 33cm height and 9cm depth.

High quality mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

High quality mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

High quality mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

A new style of large Airsoft speedloader which holds a massive 500 rounds to keep your magazines topped up in the field, and is used by manually operating the plunger.

A new style of large Airsoft speedloader which holds a massive 500 rounds to keep your magazines topped up in the field, and is used by manually operating the plunger.

High quality Mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

High quality Mesh goggles, allowing you to protect your eyes during Airsoft Skirmish or Military re-enactments without the risk of steaming up, obscuring your vision, like with plastic lens goggles. 

An easy to use Speed Loader designed to allow users to reload Airsoft M4 Midcap Magazines in the shortest possible time and with as few BBs spilled as possible.