NUPROL

An 11.1v 1200mAh 20c LiPo Battery in a Slim Stick configuration, complete with a Deans Connector. It has total dimension of: 1.35cm x 1.62cm x 18.5cm and is perfect for up-rated guns and rifles with a high power draw such as DMRs and high rate of fire setups, and other replicas that require a Stick Battery down the Receiver, such as AK/UMP models.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for a tracer unit which is small and light enough to use with a GBB pistol, NUPROL has just the thing! The Compact Tracer Unit is constructed with an aluminium shell, and is available in the ultra compact Flash-P style or the slightly larger Flash-G which is a similar size to existing Spitfire tracer units and also provides a muzzle flash effect with each shot. 

Both the Flash-P and the Flash-G have 14mm CCW threads built in, and both come with a 12mm CW female to 14mm CCW male thread adapter, suitable for Army Armament, Raven and VORSK GBB pistols. For a CQB-dominating primary pistol setup you couldn't ask for a more perfect pairing!

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

Suitable not only for Airsoft but for RC vehicles and toys too, this  7.4v 2200mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries wouldn't normally.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

A retention holster designed to fit and snugly hold EU-Series pistols with one neat trick up it's sleeve... It will happily accept a pistol with a torch or laser mounted on to it. Flashlight/laser users will know the pain of limited holsters being available, so it's great to combine the flexibility of a fabric holster with the convenience and tacticool features of a moulded retention holster.

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

An ultra-thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c. The battery is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

NUPROL - 8.4v 1600mAh Ni-Mh Small Block Battery is an Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries. 

Only with AKs can get you can get a mag like this, so AK fanboys count yourself lucky. Styled after the Russian design of the AK quad stack magazine, this AEG flash magazine holds a whopping 1000 rounds so you can stay on the field without changing mags for a crazy amount of time.

With a textured front and back for easy mag grippage, the magazine is reloaded using the top fill window and being a flash mag, it is wound (reloaded) at the bottom using the pull cord.

So if you're a fan of AKs and hate reloading, this chunky boy is for you!

Suitable not only for Airsoft but for RC vehicles and toys too, this  7.4v 2200mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries would normally not.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are not only BIO BBs, but are also Tracer BBs. These BBs are created with two purposes in mind. Firstly they are created from biodegradable materials so that they will gradually break down over time when exposed to natural environments as well as being infused with special materials to allow them to glow in the dark. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular BBs are not only BIO BBs, but are also Tracer BBs. These BBs are created with two purposes in mind. Firstly they are created from biodegradable materials so that they will gradually break down over time when exposed to natural environments as well as being infused with special materials to allow them to glow in the dark. Touted as a more environmentally friendly BB, they are sometimes required by certain Airsoft sites to play.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! 

A high quality 11.1V LiPo battery with a 1200mAh capacity, suitable for both Airsoft and RC use.

An 11.1v 1300mAh 20c LiPo Battery in a PEQ Box configuration, which makes it perfect for hiding inside a PEQ Box. It has a 9cm cable with a Deans Connector on the end, and total dimensions of: 1.65cm x 4.15cm x 6.6cm.

A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider. The must-have rifle bag for those who own a fair bit of kit.