NUPROL

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight is a close replica of the real world SF Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. Whether you have a need to distract the enemy as you clear rooms, see where you are going in the darkest of dark CQB sites or you just want your primary to really look the part, a scout style flashlight like the NX600 would be an excellent choice! 

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

An Airsoft replica helmet that's lightweight, features solid construction with enough Velcro to complete cover your head in your favourite patches and glow gel strips. 

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

If you are looking for the Special Forces tactical flashlight of choice, you have found it! Or a near-perfect replica of it, that is! The NUPROL NX600 Scout Tactical Flashlight - Short is a close replica of the real world SF M300 Scout light, the tactical flashlight of choice for special forces around the world. The NX600 is designed to be mounted to 20mm Picatinny rails with its integral mount and can be set up with either the push-button tail cap or a pressure switch, both of which are included in the package. The "short" version of the Scout Light would be a fantastic choice for a short CQB optimised Airsoft primary, offering all the flexibility of the original Scout in a shorter and lighter package. 

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

Produced by NUPROL, these Airsoft Tracer BIO BBs are precision engineered 6mm BBs which are designed to be used in a wide range of Airsoft guns and replicas. These BBs are part of the new RZR range of Airsoft BBs ranging from lightweight BBs for beginner Airsoft players, all the way up to super heavyweight BBs for professional players and snipers.

These particular are that of Tracer BBs in your choice of either red or green. These BBs, when shot are infused light to allow them to glow in the dark.

This weight of BB are designed to work in any Airsoft gun, but perform at their best in beginner and low power Airsoft replicas under 350fps. Whether you're new to Airsoft, playing indoors, or looking for BBs for your Spring Powered Airsoft replica then these are the BBs for you.

A pack of 2 3V Lithium CR123A batteries which are suitable for a wide range of Airsoft red dot sights, tactical flashlights and other Airsoft/photography accessories.

An electric powered M4 based Airsoft replica, which is constructed mainly from Polymer to offer a lightweight and manoeuvrable platform which packs a punch, and comes in a pre-two-tone Blue ready to ship for those who do not have a defence.

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

A multi-function charger which can handle Li-Ion, LiPo, LIFe and NiMH batteries, charging one at a time using the balance port and/or the included adapter to charge anything with a Small or Large Tamiya Connector.

A high performance gas, designed to operate at lower temperatures (between 3c - 20c) allowing to use your weapon all year round. Using this high power mix gives an increase in FPS, GBB efficiency and a harder kick.

A Male Tamiya to Male Deans Adapter which will install to the wire coming from your gun and allow you to connect Deans batteries to a gun with a Mini Tamiya connector. Even if you don't own Deans batteries, its a good adapter to own as you never know when you'll be caught out at a skirmish and need to borrow a battery - and we guarantee the only battery available will be on a Deans connection.

A medium capacity polymer magazine for AK series, both 47 and 74 for a range of manufacturer AK's including G&G, CYMA and more. All part of the  NUPROL Essential range of magazines.

The NUPROL Lower Face Shield V2 is a different type of Lower Face Protection that is bulkier and better accommodates those with beards, and protects more of the head than a standard one.

The NUPROL Lower Face Shield V2 is a different type of Lower Face Protection that is bulkier and better accommodates those with beards, and protects more of the head than a standard one.

The NUPROL Lower Face Shield V2 is a different type of Lower Face Protection that is bulkier and better accommodates those with beards, and protects more of the head than a standard one.

The NUPROL Lower Face Shield V2 is a different type of Lower Face Protection that is bulkier and better accommodates those with beards, and protects more of the head than a standard one.

Looking for polymer mid-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 150rnd LS-Mag Mid-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

A Battery designed to fit into most Crane Stocks, this is a 7 cell Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers as part of their POWER range of Batteries. 

An ultra thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c, giving it a 20w output. 

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!

The NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader removes the need for complex or fiddly mechanisms. It is easy to use, with a large opening fill window and a simple crank handle, making it easy to use, even for gloved users. The speed loader is designed to be used in combination with STANAG / M4 / AR-15 / M16 AEG Magazines which clip securely into the bottom of the speed loader similarly to how mags are inserted into Airsoft Replicas.

The speed loader is filled from the top by sliding back the large fill window and pouring your BBs in directly from the bottle. Once you have inserted your magazine, fold out the side Crank and turn it to start filling your magazine, fold it back in once your magazine is full. The top of the speed loader also features ergonomic finger grooves for a more secure grip on the loader whilst using it.

This is the perfect alternative for those Airsoft Skirmishers who are sick of carrying around multiple small speed loaders and the rubber inserts within the NUPROL 1000rnd Crank BB Magazine SILENT Speed Loader ensure there is no "battle rattle" even whilst running around the battlefield!