Novritsch Accessories

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

Suppose you need something to support the weight of your hefty sniper rifle, the Novritsch Split M-LOK Bipod is exactly what you need! Platforms like the Novritsch SSG10 A2 feature M-LOK rail systems on either side of their handguard so mounting a bipod can sometimes be tricksy. The split design is the perfect remedy, it allows you to mount a single bipod leg on either side of your platform, providing support on even the heftiest of M-LOK rail system platforms!

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.40g 6mm Sniper BIO BBs will help you get the most out of your setup. Supplied in a speedloader-friendly resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. These are the biodegradable version, perfect for strict skirmish sites and guilt-free sniping. Feed your sniper rifle with the ammo it deserves!

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

The Novritsch 0.62g Full Thrust BBs are 6.44mm in diameter, which means they are only compatible with snipers that have been upgraded with the Novritsch ''Full thrust'' kit and also require a Novritsch ''Full thrust'' magazine. The higher surface area of the 6.44mm BBs means the force of the BB when it hits is spread over a bigger area. This results in the 0.62g BB causing no more damage than a standard 6mm BB when shot at equal power and range. These white BBs come in a resealable bottle which contains approximately 444rnds, plenty of ammo to hit those shots from across the battlefield and being white means they can be easily tracked due to their contrast with the flourishing colours of an outdoor skirmish field.

The heavier weight of these BBs means they will travel further, provide better accuracy and maintain more stability in the wind. It provides a superior sniping experience and allows you to hit opponents consistently from much longer distances. The BBs come in a practical bottle with a rubber seal inside the cap to protect your BBs from getting dirty or moist.

If you're searching for a high-quality rifle scope to top off your sniper rifle, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings is a fantastic choice. Constructed with an alloy monotube and glass lenses, this scope comes ready to mount, with a pair of 25mm scope rings for 20mm Picatinny rails included in the box, along with a microfibre cleaning cloth. 

As its name might suggest, 3-9x50 Rifle Scope Mk2 w/Scope Rings offers variable magnification between 3x and 9x, ideal for both spotting your target and engaging at Airsoft ranges. The objective lens boasts a whopping 50mm diameter, meaning you get a wider field of view than most comparable rifle scopes for an easier time tracking moving targets and the ability to see more around your crosshair. 

Windage, elevation, illumination and focus are all adjustable, allowing you to set the scope up precisely and tune the red or green illuminated reticle for your current ambient lighting conditions. If you're a sniper with your sights set on a beast of a rifle scope, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings suits your needs perfectly!

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

If you want to set your SSP5 up for competition shooting or speed up its handling in general, the Novritsch SSP5 Charging Handle would be a great upgrade. This charging handle mounts in place of the rear sight, making it ideal for red dot equipped setups, allowing you to manipulate the slide far quicker and easier than before. This is the Left Side charging handle variant, meaning it protrudes to the left side of the pistol, perfect for right-handed shooters.

Whether you use your SSP5 as a primary weapon or as a steel shooting beast in AIPSC, this charging handle will change the way you use the platform and make racking the slide after a reload far easier and more intuitive than ever before. Weighing in a minuscule 5g, this won't slow your SSP5 down one bit!

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

If you need a scope mount with some interesting tricks up its sleeve, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube is exactly that! Constructed from aluminium with a QD 20mm Picatinny mounting interface, the One-Piece 20mm Picatinny Scope Mount V2 is easy to mount to any 20mm Picatinny rail and is nice and lightweight, tipping the scales at a surprisingly low 200 grams.

The V2 is compatible with either 25mm/1-inch or 30mm monotubes, making it useful for almost every magnified rifle scope out there thanks to the included ring spacers. On the top of each ring, we are treated to mounting holes for the included modular 20mm Picatinny rail section, allowing you to fit it to the front or rear ring and install a Runcam, micro red dot sight or whatever else you fancy. The V2 is set at the standard (for AR platforms) optical centreline height, making it ideal for most Airsoft platforms but if you need something a bit higher, check out the original One-Piece 20mm Picatinny Scope Mount; 25mm Tube!

Integral to the mount's design and visible from the rear we also have a bubble level, allowing you to ensure your rifle is perfectly horizontal before taking that key, game-winning shot. If you love a lightweight scope mount which is easy to fit and packs in a lot more functionality than its rivals, the Novritsch One-Piece 20mm Picatinny Scope Mount V2; 25/30mm Tube will suit you perfectly!

If you've misplaced a screw from your SSG10 A3, the Novritsch SSG10 A3 Stock Screw Set is what you need! This set includes all of the stock screws for the SSG10 A3, constructed from steel and finished in black, just like the original screws. This screw set is only for the SSG10 A3 but may also be useful for those running the Maple Leaf MLC-S2 chassis on a VSR10 platform. 

The Novritsch Hi-Capa thread adapter is exactly what you need for mounting barrel attachments to your trusty Hi-Capa Airsoft pistols. The adapter features 12mm CCW threading on one side and 14mm CCW on the other. The 12mm threading screws into your Hi-Capas outer barrel and the 14mm threading is then ready for most common muzzle devices, suppressors or tracer units.

Customise your Hi-Capas look or improve its performance in-game using the Novritsch Hi-Capa Thread Adapter to mount your preferred muzzle device.

The Novritsch 28rnd Full Thrust Magazine for SSG10 Sniper Rifles is designed to hold exclusively 6.44mm BBs. It does not hold regular 6mm BBs. It is constructed from a translucent polymer which is perfect for quickly checking how much ammo you have remaining before a reload is due. This magazine can only be filled with a Novritsch Full Thrust BB Magazine Speed Loader as no other speed loader can hold 6.44mm BBs.

The magazine is single-stacked and holds 28 Full Thrust BBs. This may seem like a small amount, but for a talented marksman, this is more than enough to dominate the skirmish field. 

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!

If you need to get on target faster, the Novritsch Red Dot Sight V2 with 20mm Picatinny Mount is what you need! This red dot sight is constructed from aluminium and includes a cantilever mount for 20mm Picatinny rails, making it ready to mount on any Airsoft gun with a 20mm Picatinny top rail. 

Offering the choice of red or green reticle illumination with 5 brightness settings for each, the Red Dot Sight V2 allows you to set up for whatever environment you're operating in, including almost any ambient light level. We recommend using the lowest brightness setting visible to keep the dot nice and crisp!

Windage and elevation are both adjustable via capped turrets, and the front lens is made from strong Lexan, making it strong enough to withstand most BB impacts (we still recommend using a lens protector!). If you're no longer up for making do with iron sights, the Novritsch Red Dot Sight V2 with 20mm Picatinny Mount is the ideal next step!

If you're running the Novritsch Red Dot Sight V2 but want to see further, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount is what you need! This flip-to-side magnifier offers 3x magnification, making distant targets easy to spot and allowing you to turn your RDS into a long-range optic and flip back to close range instantly via the flip-to-side mount. 

The mount is ready to rock on any 20mm Picatinny rail and offers standard M4/AR-15 height over bore, matching the optical centreline of most red dot sights but ideally used with the Novritsch Red Dot Sight V2. Windage and elevation adjustment dials are present on the left side and top respectively. At the rear, we have a focus adjustment dial so you can adjust to get the clearest image of your target and reticle. If you operate in a mixed environment and often need to handle both close and long-range threats, the Novritsch 3x Optic Magnifier with Flip-to-Side Mount belongs on your primary!

If you need a bit more range from your Novritsch SSG series sniper rifle, this spring will do it! The SSG 13mm Main Spring is compatible with any Novritsch sniper rifle with SSG in the name, along with the TAC338 platform. 

As impressive as the range of Novritsch sniper rifles already is, this spring should give you an FPS increase so you can engage targets at longer distances, though it will make your rifle more difficult to cock. If you're the type of sniper who prioritises effective range over mobility and speed, the SSG 13mm Main Spring will give you the range you need!

If you have a Novritsch Full Thrust system, you'll need one of these! The Novritsch Full Thrust BB Magazine Speed Loader is a thumb plunger-type speed loader constructed from translucent polymer and holds approximately 100 BBs. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your magazine is now filled.

If you're running a high-performance Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.46g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out. 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves! These BBs are second to none when it comes to long-range engagements. The pure white colour allows you to track the full trajectory of your BBs no matter how far they travel.

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

Turn your regular airsoft rifle into a DMR-ready monster with the Novritsch DMR Stock. It doesn't only look the tactical part, but it also features a fully adjustable and modular cheek rest so you can line up the perfect shot without the neck pain! This is a must-have for any semi-auto skirmisher who wants a stock that will ensure the edge over their opponent. It is designed to fit over a regular AR/M4/M16 buffer tube, both electric and gas-powered rifles.

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a lightweight alloy, which makes it strong and bump-resistant but doesn't add lots of extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This Hand stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

The Novritsch Angled Hand Stop is a great choice for those Airsofters who find it hard to judge the length of their rifle or want to quickly find their correct shooting position in the heat of the battle.

This is a longer inner barrel for the Novritsch SSP18 pistol. It adds an extra 15mm of length to the barrel. This time, for superior accuracy and power, size absolutely matters... The longer a barrel is, the more time there is for a BB to speed up and spin. This makes it more precise and faster when leaving the barrel, providing you with a more consistent shot so you can dominate your skirmishes with ease.

It is ideal for those who like to use a compensator or suppressor on their SSP18. Unfortunately, due to the extra length, it’s not compatible with most tracer units. This is a technical part and it is only encouraged to install if you are confident in your knowledge and skills.